转到网站首页
转为中文步骤：
1、请用电脑端360浏览器打开本页地址，如您电脑未安装360浏览器，请点这里下载;
2、点击360浏览器右上角的翻译插件，如右图红圈中所示:
3、点击所弹出窗口里的右下角的按钮 “翻译当前网页”;
4、弹窗提示翻译完毕后关闭弹窗即可；
1N4001 thru 1N4007  
Vishay General Semiconductor  
General Purpose Plastic Rectifier  
FEATURES  
• Low forward voltage drop  
• Low leakage current  
• High forward surge capability  
• Solder dip 260 °C, 40 s  
DO-204AL (DO-41)  
• Component in accordance to RoHS 2002/95/EC  
and WEEE 2002/96/EC  
TYPICAL APPLICATIONS  
For use in general purpose rectification of power  
supplies, inverters, converters and freewheeling  
diodes application.  
PRIMARY CHARACTERISTICS  
IF(AV)  
1.0 A  
(Note: These devices are not Q101 qualified.)  
VRRM  
50 V to 1000 V  
30 A  
I
FSM (8.3 ms sine-wave)  
MECHANICAL DATA  
Case: DO-204AL, molded epoxy body  
I
FSM (square wave tp = 1 ms)  
45 A  
VF  
IR  
1.1 V  
Epoxy meets UL 94V-0 flammability rating  
5.0 µA  
150 °C  
Terminals: Matte tin plated leads, solderable per  
J-STD-002 and JESD22-B102  
TJ max.  
E3 suffix for consumer grade, meets JESD 201 class  
1A whisker test  
Polarity: Color band denotes cathode end  
MAXIMUM RATINGS (T = 25 °C unless otherwise noted)  
A
PARAMETER  
SYMBOL 1N4001 1N4002 1N4003 1N4004 1N4005 1N4006 1N4007 UNIT  
Maximum repetitive peak reverse voltage  
Maximum RMS voltage  
VRRM  
VRMS  
VDC  
50  
35  
50  
100  
70  
200  
140  
200  
400  
280  
400  
600  
420  
600  
800  
560  
800  
1000  
700  
V
V
V
Maximum DC blocking voltage  
100  
1000  
Maximum average forward rectified current  
0.375" (9.5 mm) lead length at TA = 75 °C  
IF(AV)  
1.0  
30  
A
A
Peak forward surge current 8.3 ms single half  
sine-wave superimposed on rated load  
IFSM  
Non-repetitive peak forward  
surge current square waveform  
TA = 25 °C (Fig. 3)  
tp = 1 ms  
tp = 2 ms  
tp = 5 ms  
45  
35  
30  
IFSM  
A
Maximum full load reverse current, full cycle  
average 0.375" (9.5 mm) lead length TL = 75 °C  
IR(AV)  
30  
µA  
Rating for fusing (t < 8.3 ms) (1)  
I2t  
3.7  
A2s  
°C  
Operating junction and storage temperature  
TJ, TSTG  
- 50 to + 150  
Note:  
(1) For device using on bridge rectifier application  
Document Number: 88503  
Revision: 26-Mar-08  
For technical questions within your region, please contact one of the following:  
PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com  
www.vishay.com  
1
1N4001 thru 1N4007  
Vishay General Semiconductor  
ELECTRICAL CHARACTERISTICS (T = 25 °C unless otherwise noted)  
A
PARAMETER  
TEST CONDITIONS SYMBOL 1N4001 1N4002 1N4003 1N4004 1N4005 1N4006 1N4007 UNIT  
Maximum instantaneous  
forward voltage  
1.0 A  
VF  
1.1  
V
Maximum DC reverse current  
at rated DC blocking voltage  
T
A = 25 °C  
5.0  
50  
IR  
µA  
pF  
TA = 125 °C  
Typical junction capacitance  
4.0 V, 1 MHz  
CJ  
15  
THERMAL CHARACTERISTICS (T = 25 °C unless otherwise noted)  
A
PARAMETER  
SYMBOL 1N4001 1N4002 1N4003 1N4004 1N4005 1N4006 1N4007 UNIT  
RθJA  
RθJL  
50  
25  
Typical thermal resistance (1)  
°C/W  
Note:  
(1) Thermal resistance from junction to ambient at 0.375" (9.5 mm) lead length, P.C.B. mounted  
ORDERING INFORMATION (Example)  
PREFERRED P/N  
1N4004-E3/54  
1N4004-E3/73  
UNIT WEIGHT (g)  
PREFERRED PACKAGE CODE  
BASE QUANTITY  
DELIVERY MODE  
0.33  
0.33  
54  
73  
5500  
3000  
13" diameter paper tape and reel  
Ammo pack packaging  
RATINGS AND CHARACTERISTICS CURVES  
(T = 25 °C unless otherwise noted)  
A
1.0  
30  
25  
20  
15  
10  
5
60 Hz Resistive or  
Inductive Load  
TA = 75 °C  
8.3 ms Single Half Sine-Wave  
0.8  
0.6  
0.4  
0.2  
0
0.2 x 0.2" (5.0 x 5.0 mm)  
Copper Pads  
0.375" (9.5 mm)  
Lead Length  
0
25  
50  
75  
100  
125  
150  
175  
1
10  
100  
Junction Temperature (°C)  
Number of Cycles at 60 Hz  
Figure 1. Forward Current Derating Curve  
Figure 2. Maximum Non-repetitive Peak Forward Surge Current  
www.vishay.com  
2
For technical questions within your region, please contact one of the following:  
PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com  
Document Number: 88503  
Revision: 26-Mar-08  
1N4001 thru 1N4007  
Vishay General Semiconductor  
50  
45  
40  
35  
30  
25  
20  
15  
10  
100  
TJ = 25 °C  
f = 1.0 MHz  
Vsig = 50 mVp-p  
tp = 1 ms  
tp = 2 ms  
tp = 5 ms  
10  
tp  
square waveform  
1
25  
50  
75  
100  
125  
0.1  
1
10  
100  
Reverse Voltage (V)  
Ambient Temperature (°C)  
Figure 3. Typical Instantaneous Forward Characteristics  
Figure 6. Typical Junction Capacitance  
100  
100  
10  
TJ = 25 °C  
Pulse Width = 300 µs  
1 % Duty Cycle  
10  
1
1
0.1  
0.01  
0.1  
0.01  
0.1  
1
10  
100  
0.6  
0.8  
1.0  
1.2  
1.4  
1.6  
1.8  
Instantaneous Forward Voltage (V)  
t - Pulse Duration (s)  
Figure 4. Typical Instantaneous Forward Characteristics  
Figure 7. Typical Transient Thermal Impedance  
1000  
TJ = 150 °C  
100  
10  
1
TJ = 100 °C  
TJ = 25 °C  
0.1  
0.01  
0
20  
40  
60  
80  
100  
Percentage of Peak Reverse Voltage (%)  
Figure 5. Typical Reverse Characteristics  
Document Number: 88503  
Revision: 26-Mar-08  
For technical questions within your region, please contact one of the following:  
PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com  
www.vishay.com  
3
1N4001 thru 1N4007  
Vishay General Semiconductor  
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)  
DO-204AL (DO-41)  
1.0 (25.4)  
MIN.  
0.107 (2.7)  
0.080 (2.0)  
DIA.  
0.205 (5.2)  
0.160 (4.1)  
1.0 (25.4)  
MIN.  
0.034 (0.86)  
0.028 (0.71)  
DIA.  
0.026 (0.66)  
0.023 (0.58)  
Note: Lead diameter is  
for suffix “E” part numbers  
www.vishay.com  
4
For technical questions within your region, please contact one of the following:  
PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com  
Document Number: 88503  
Revision: 26-Mar-08  
Legal Disclaimer Notice  
Vishay  
Disclaimer  
All product specifications and data are subject to change without notice.  
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf  
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein  
or in any other disclosure relating to any product.  
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any  
information provided herein to the maximum extent permitted by law. The product specifications do not expand or  
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed  
therein, which apply to these products.  
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this  
document or by any conduct of Vishay.  
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless  
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such  
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting  
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding  
products designed for such applications.  
Product names and markings noted herein may be trademarks of their respective owners.  
Document Number: 91000  
Revision: 18-Jul-08  
www.vishay.com  
1