1N5221UR thru 1N5281BUR, e3  
					(or MLL5221 thru MLL5281B, e3)  
					500 mW GLASS SURFACE MOUNT  
					ZENER DIODES  
					S C O T T S D A L E D I V I S I O N  
					DESCRIPTION  
					APPEARANCE  
					The 1N5221BUR thru 1N5281BUR series of 0.5 watt Zener Voltage  
					Regulators provides a surface mount equivalent to the popular JEDEC  
					registered 1N5221B to 1N5281B for 2.4 to 200 volts in standard 5%  
					tolerances as well as tighter tolerances identified by different suffix letters on  
					the part number. These are also available with an internal-metallurgical-  
					bond option by adding a “-1” suffix (see separate data sheet). Microsemi  
					also offers numerous other Zener products to meet higher and lower power  
					applications.  
					DO-213AA  
					IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com  
					FEATURES  
					APPLICATIONS / BENEFITS  
					•
					Surface mount equivalents to the JEDEC registered  
					1N5221 thru 1N5281B series  
					•
					Regulates voltage over a broad operating  
					current and temperature range  
					•
					•
					•
					Hermetically sealed surface mount package  
					•
					•
					Selection from 2.4 to 200 V  
					RoHS Compliant devices available by adding “e3” suffix  
					Standard voltage tolerances are plus/minus 5%  
					with B suffix identification and 10 % with A suffix  
					Tight tolerances available in plus or minus 2%  
					or 1% with C or D suffix respectively  
					Internal metallurgical bond option available by adding a  
					“-1” suffix (see separate data sheet for same part  
					numbers with “-1” suffix)  
					•
					•
					DO-7 or DO-35 glass body axial-leaded Zener  
					equivalents also available per JEDEC registration (see  
					separate data sheet for part numbers 1N5221 thru  
					1N5281B series  
					•
					•
					•
					Nonsensitive to ESD per MIL-STD-750 Method 1020  
					Minimal capacitance (see Figure 3)  
					Inherently radiation hard as described in Microsemi  
					MicroNote 050  
					MAXIMUM RATINGS  
					MECHANICAL AND PACKAGING  
					•
					•
					Operating and Storage temperature: -65ºC to +175ºC  
					•
					CASE: Hermetically sealed glass DO-213AA  
					(SOD80 or MLL34) MELF style package  
					Thermal Resistance: 150ºC/W junction to end cap  
					and 300ºC/W junction to ambient when mounted on  
					FR4 PC board (1 oz Cu) with recommended footprint  
					(see last page)  
					•
					FINISH: End caps Tin-Lead or RoHS Compliant  
					annealed matte-Tin plating solderable per MIL-STD-  
					750, method 2026  
					•
					Steady-State Power: 0.5 watts at end cap  
					temperature TEC < 100oC or ambient temperature TA  
					< 25ºC when mounted on FR4 PC board as described  
					for thermal resistance above (see Figure 2 for  
					derating)  
					•
					POLARITY: Cathode indicated by band where  
					diode is to be operated with the banded end positive  
					with respect to the opposite end for Zener regulation  
					•
					•
					MARKING: cathode band only  
					TAPE & REEL option: Standard per EIA-481-B with  
					12 mm tape, 2000 per 7 inch reel or 5000 per 13  
					inch reel (add “TR” suffix to part number)  
					WEIGHT: 0.04 grams  
					•
					•
					Forward voltage @200 mA: 1.1 volts (maximum)  
					Solder Temperatures: 260 ºC for 10 seconds (max)  
					•
					•
					See package dimensions on last page  
					Copyright © 2005  
					8-29-2005 REV B  
					Microsemi  
					Page 1  
					Scottsdale Division  
					8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503