转到网站首页
转为中文步骤：
1、请用电脑端360浏览器打开本页地址，如您电脑未安装360浏览器，请点这里下载;
2、点击360浏览器右上角的翻译插件，如右图红圈中所示:
3、点击所弹出窗口里的右下角的按钮 “翻译当前网页”;
4、弹窗提示翻译完毕后关闭弹窗即可；
ꢀ ꢁꢂ ꢃ ꢄꢅ ꢅ ꢆ ꢇꢈ ꢉ ꢇꢆ  
ꢊꢇꢋ ꢌꢍ ꢉꢎ ꢇꢏꢎꢐ ꢄꢍꢌꢋ ꢇ ꢈꢇꢋ ꢑ ꢄꢌꢍꢐ ꢈꢆ  
SLVS011D − OCTOBER 1982 − REVISED AUGUST 2003  
D PACKAGE  
(TOP VIEW)  
D
D
D
D
D
D
3-Terminal Regulators  
Output Current Up To 100 mA  
No External Components Required  
Internal Thermal-Overload Protection  
Internal Short-Circuit Current Limiting  
OUTPUT  
1
2
3
4
8
7
6
5
NC  
INPUT  
INPUT  
†
†
†
INPUT  
†
INPUT  
NC  
COMMON  
Direct Replacement for Industry-Standard  
MC79L00 Series  
†
Internally connected  
NC − No internal connection  
D
Available in 5% or 10% Selections  
LP PACKAGE  
(TOP VIEW)  
description/ordering information  
This  
series  
of  
fixed  
negative-voltage  
OUTPUT  
integrated-circuit voltage regulators is designed  
for a wide range of applications. These include  
on-card regulation for elimination of noise and  
distribution problems associated with single-point  
INPUT  
COMMON  
regulation. In addition, they can be used to control series pass elements to make high-current voltage-regulator  
circuits. One of these regulators can deliver up to 100 mA of output current. The internal current-limiting and  
thermal-shutdown features essentially make the regulators immune to overload. When used as a replacement  
for a Zener-diode and resistor combination, these devices can provide an effective improvement in output  
impedance of two orders of magnitude, with lower bias current.  
ORDERING INFORMATION  
NOMINAL  
OUTPUT  
VOLTAGE  
ORDERABLE  
PART NUMBER  
TOP-SIDE  
MARKING  
OUTPUT  
VOLTAGE  
(V)  
†
T
J
PACKAGE  
TOLERANCE  
Tube of 75  
MC79L05ACD  
MC79L05ACDR  
MC79L05ACLP  
MC79L05ACLPR  
MC79L12ACD  
MC79L12ACDR  
MC79L12ACLP  
MC79L12ACLPR  
MC79L15ACLP  
SOIC (D)  
79L05A  
Reel of 2500  
Bulk of 1000  
Reel of 2000  
Tube of 75  
−5  
TO-226 / TO-92 (LP)  
SOIC (D)  
79L05AC  
79L12A  
Reel of 2500  
Bulk of 1000  
Reel of 2000  
Bulk of 1000  
5%  
−12  
−15  
0°C to 125°C  
TO-226 / TO-92 (LP)  
79L12AC  
Ammo of 2000 MC79L15ACLPM  
TO-226 / TO-92 (LP)  
79L15AC  
Reel of 2000  
Bulk of 1000  
Tube of 75  
MC79L15ACLPR  
MC79L12CLP  
MC79L15CD  
−12  
−15  
TO-226 / TO-92 (LP)  
SOIC (D)  
79L12C  
79L15C  
10%  
†
Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at  
www.ti.com/sc/package.  
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of  
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.  
ꢒꢈ ꢐ ꢓꢑ ꢁ ꢍꢉ ꢐꢊ ꢓ ꢌꢍꢌ ꢔꢕ ꢖꢗ ꢘ ꢙꢚ ꢛꢔꢗꢕ ꢔꢜ ꢝꢞ ꢘ ꢘ ꢟꢕꢛ ꢚꢜ ꢗꢖ ꢠꢞꢡ ꢢꢔꢝ ꢚꢛꢔ ꢗꢕ ꢣꢚ ꢛꢟꢤ  
ꢒꢘ ꢗ ꢣꢞꢝ ꢛ ꢜ ꢝ ꢗꢕ ꢖꢗꢘ ꢙ ꢛꢗ ꢜ ꢠꢟ ꢝ ꢔꢖ ꢔꢝꢚ ꢛꢔꢗꢕ ꢜ ꢠꢟ ꢘ ꢛꢥꢟ ꢛꢟ ꢘ ꢙꢜ ꢗꢖ ꢍꢟꢦ ꢚ ꢜ ꢉꢕꢜ ꢛꢘ ꢞꢙ ꢟꢕꢛ ꢜ  
ꢜ ꢛꢚ ꢕ ꢣꢚ ꢘ ꢣ ꢧ ꢚ ꢘꢘ ꢚ ꢕ ꢛꢨꢤ ꢒꢘ ꢗ ꢣꢞꢝ ꢛꢔꢗꢕ ꢠꢘ ꢗꢝ ꢟꢜ ꢜꢔ ꢕꢩ ꢣꢗꢟ ꢜ ꢕꢗꢛ ꢕꢟ ꢝꢟ ꢜꢜ ꢚꢘ ꢔꢢ ꢨ ꢔꢕꢝ ꢢꢞꢣ ꢟ  
ꢛꢟ ꢜ ꢛ ꢔꢕ ꢩ ꢗꢖ ꢚ ꢢꢢ ꢠꢚ ꢘ ꢚ ꢙ ꢟ ꢛꢟ ꢘꢜ ꢤ  
Copyright 2003, Texas Instruments Incorporated  
1
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265  
ꢀ ꢁ ꢂꢃ ꢄ ꢅ ꢅ ꢆꢇ ꢈꢉ ꢇ ꢆ  
ꢊ ꢇꢋꢌꢍ ꢉ ꢎꢇ ꢏꢎꢐꢄꢍꢌꢋ ꢇ ꢈꢇ ꢋ ꢑꢄꢌꢍꢐ ꢈꢆ  
SLVS011D − OCTOBER 1982 − REVISED AUGUST 2003  
equivalent schematic  
COMMON  
OUTPUT  
INPUT  
†
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)  
Input voltage: MC79L05 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −30 V  
MC79L12, MC79L15 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −35 V  
Package thermal impedance, θ (see Notes 1 and 2): D package . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97°C/W  
JA  
LP package . . . . . . . . . . . . . . . . . . . . . . . . . . 140°C/W  
Operating free-air, case, or virtual junction temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150°C  
Lead temperature 1.6 mm (1/16 inch) from case for 10 seconds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260°C  
Storage temperature range, T  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −65°C to 150°C  
stg  
†
Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and  
functionaloperation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied.  
Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.  
NOTES: 1. Maximumpower dissipation is a function of T (max), θ , and T . The maximum allowable power dissipation at any allowable ambient  
J
JA  
A
temperatureis P = (T (max) − T )/θ . Operating at the absolute maximum T of 150°C can affect reliability.  
D
J
A
JA  
J
2. The package thermal impedance is calculated in accordance with JESD 51-7.  
recommended operating conditions  
MIN MAX  
UNIT  
MC79L05  
MC79L12  
MC79L15  
−7  
−14.5  
−17.5  
−20  
−27  
−30  
100  
125  
V
Input voltage  
V
I
I
O
Output current  
mA  
T
J
Operating virtual junction temperature  
0
°C  
2
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265  
ꢀ ꢁꢂ ꢃ ꢄꢅ ꢅ ꢆ ꢇꢈ ꢉ ꢇꢆ  
ꢊꢇꢋ ꢌꢍ ꢉꢎ ꢇꢏꢎꢐ ꢄꢍꢌꢋ ꢇ ꢈꢇꢋ ꢑ ꢄꢌꢍꢐ ꢈꢆ  
SLVS011D − OCTOBER 1982 − REVISED AUGUST 2003  
electrical characteristics at specified virtual junction temperature, V = −10 V, I = 40 mA (unless  
I
O
otherwise noted)  
MC79L05C  
MC79L05AC  
†
PARAMETER  
T
UNIT  
TEST CONDITIONS  
J
MIN  
TYP  
MAX  
MIN  
−4.8  
TYP  
MAX  
25°C  
−4.6  
−4.5  
−4.5  
−5  
−5.4  
−5  
−5.2  
V = −7 V to −20 V,  
I
O
‡
0°C to 125°C  
0°C to 125°C  
−5.5 −4.75  
−5.25  
Output voltage  
V
I
= 1 mA to 40 mA  
V = −10 V, I = 1 mA to 70 mA  
−5.5 −4.75  
−5.25  
150  
I
O
V = −7 V to −20 V  
200  
150  
41  
I
Input regulation  
Ripple rejection  
25°C  
25°C  
mV  
dB  
V = −8 V to −20 V  
100  
I
V = −8 V to −18 V, f = 120 Hz  
40  
49  
49  
I
I
I
= 1 mA to 100 mA  
= 1 mA to 40 mA  
60  
60  
30  
O
Output regulation  
25°C  
mV  
30  
O
Output noise voltage  
Dropout voltage  
f = 10 Hz to 100 kHz  
= 40 mA  
25°C  
25°C  
25°C  
125°C  
40  
40  
µV  
I
O
1.7  
1.7  
V
6
5.5  
1.5  
0.2  
6
5.5  
1.5  
0.1  
Bias current  
mA  
mA  
V = −8 V to −20 V  
I
Bias current change  
†
0°C to 125°C  
I
O
= 1 mA to 40 mA  
All characteristics are measured with a 0.33-µF capacitor across the input and a 0.1-µF capacitor across the output. Pulse-testing techniques are  
used to maintain the junction temperature as close to the ambient temperature as possible. Thermal effects must be taken into account separately.  
This specification applies only for dc power dissipation permitted by absolute maximum ratings.  
‡
electrical characteristics at specified virtual junction temperature, V = −19 V, I = 40 mA (unless  
I
O
otherwise noted)  
MC79L12C  
MIN TYP  
−11.1  
MC79L12AC  
†
PARAMETER  
T
UNIT  
TEST CONDITIONS  
J
MAX  
MIN  
TYP  
MAX  
25°C  
−12 −12.9 −11.5  
−13.2 −11.4  
−12 −12.5  
V = −14.5 V to −27 V,  
I
O
‡
0°C to 125°C −10.8  
0°C to 125°C −10.8  
−12.6  
Output voltage  
V
I
= 1 mA to 40 mA  
V = −19 V, I = 1 mA to 70 mA  
−13.2 −11.4  
−12.6  
I
O
V = −14.5 V to −27 V  
250  
200  
250  
I
Input regulation  
Ripple rejection  
25°C  
mV  
dB  
V = −16 V to −27 V  
I
200  
V = −15 V to −25 V, f = 120 Hz  
I
25°C  
25°C  
36  
42  
37  
42  
100  
50  
I
I
= 1 mA to 100 mA  
= 1 mA to 40 mA  
100  
50  
O
Output regulation  
mV  
O
Output noise voltage  
Dropout voltage  
f = 10 Hz to 100 kHz  
= 40 mA  
25°C  
25°C  
25°C  
125°C  
80  
80  
µV  
I
O
1.7  
1.7  
6.5  
6
V
6.5  
6
Bias current  
mA  
mA  
V = −16 V to −27 V  
I
1.5  
0.2  
1.5  
0.1  
Bias current change  
†
0°C to 125°C  
I
O
= 1 mA to 40 mA  
All characteristics are measured with a 0.33-µF capacitor across the input and a 0.1-µF capacitor across the output. Pulse-testing techniques are  
used to maintain the junction temperature as close to the ambient temperature as possible. Thermal effects must be taken into account separately.  
This specification applies only for dc power dissipation permitted by absolute maximum ratings.  
‡
3
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265  
ꢀ ꢁ ꢂꢃ ꢄ ꢅ ꢅ ꢆꢇ ꢈꢉ ꢇ ꢆ  
ꢊ ꢇꢋꢌꢍ ꢉ ꢎꢇ ꢏꢎꢐꢄꢍꢌꢋ ꢇ ꢈꢇ ꢋ ꢑꢄꢌꢍꢐ ꢈꢆ  
SLVS011D − OCTOBER 1982 − REVISED AUGUST 2003  
electrical characteristics at specified virtual junction temperature, V = −23 V, I = 40 mA (unless  
I
O
otherwise noted)  
MC79L15C  
MIN TYP  
−13.8  
MC79L15AC  
†
PARAMETER  
T
UNIT  
TEST CONDITIONS  
J
MAX  
MIN  
−14.4  
TYP  
MAX  
25°C  
−15 −16.2  
−15  
−15.6  
V = −17.5 V to −30 V,  
I
‡
Output voltage  
0°C to 125°C −13.5  
0°C to 125°C −13.5  
25°C  
−16.5 −14.25  
−15.75  
V
I
O
= 1 mA to 40 mA  
V = −23 V, I = 1 mA to 70 mA  
−16.5 −14.25  
−15.75  
300  
I
O
V = −17.5 V to −30 V  
I
300  
250  
Input regulation  
Ripple rejection  
Output regulation  
mV  
dB  
V = −17.5 V to −30 V  
I
250  
V = −18.5 V to −28.5 V, f = 120 Hz  
I
25°C  
25°C  
33  
39  
34  
39  
I
= 1 mA to 100 mA  
= 1 mA to 40 mA  
150  
75  
150  
75  
O
O
mV  
I
Output noise voltage  
Dropout voltage  
f = 10 Hz to 100 kHz  
= 40 mA  
25°C  
25°C  
25°C  
125°C  
90  
90  
µV  
I
O
1.7  
1.7  
V
6.5  
6
6.5  
6
Bias current  
mA  
mA  
V = −20 V to −30 V  
I
1.5  
0.2  
1.5  
0.1  
Bias current change  
†
0°C to 125°C  
I
O
= 1 mA to 40 mA  
All characteristics are measured with a 0.33-µF capacitor across the input and a 0.1-µF capacitor across the output. Pulse-testing techniques are  
used to maintain the junction temperature as close to the ambient temperature as possible. Thermal effects must be taken into account separately.  
This specification applies only for dc power dissipation permitted by absolute maximum ratings.  
‡
4
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265  
PACKAGE OPTION ADDENDUM  
www.ti.com  
26-Aug-2013  
PACKAGING INFORMATION  
Orderable Device  
MC79L05ACD  
Status Package Type Package Pins Package  
Eco Plan Lead/Ball Finish  
MSL Peak Temp  
Op Temp (°C)  
0 to 125  
0 to 125  
0 to 125  
0 to 125  
0 to 125  
0 to 125  
0 to 125  
0 to 125  
Device Marking  
Samples  
Drawing  
Qty  
(1)  
(2)  
(3)  
(4/5)  
ACTIVE  
SOIC  
SOIC  
SOIC  
SOIC  
SOIC  
SOIC  
TO-92  
TO-92  
D
8
8
8
8
8
8
3
3
75  
Green (RoHS  
& no Sb/Br)  
CU NIPDAU  
CU NIPDAU  
CU NIPDAU  
CU NIPDAU  
CU NIPDAU  
CU NIPDAU  
CU SN  
Level-1-260C-UNLIM  
Level-1-260C-UNLIM  
Level-1-260C-UNLIM  
Level-1-260C-UNLIM  
Level-1-260C-UNLIM  
Level-1-260C-UNLIM  
N / A for Pkg Type  
79L05A  
MC79L05ACDE4  
MC79L05ACDG4  
MC79L05ACDR  
MC79L05ACDRE4  
MC79L05ACDRG4  
MC79L05ACLP  
ACTIVE  
ACTIVE  
ACTIVE  
ACTIVE  
ACTIVE  
ACTIVE  
ACTIVE  
D
D
75  
Green (RoHS  
& no Sb/Br)  
79L05A  
79L05A  
79L05A  
79L05A  
79L05A  
79L05AC  
79L05AC  
75  
Green (RoHS  
& no Sb/Br)  
D
2500  
2500  
2500  
1000  
1000  
Green (RoHS  
& no Sb/Br)  
D
Green (RoHS  
& no Sb/Br)  
D
Green (RoHS  
& no Sb/Br)  
LP  
LP  
Pb-Free  
(RoHS)  
MC79L05ACLPE3  
Pb-Free  
(RoHS)  
CU SN  
N / A for Pkg Type  
MC79L05ACLPME3  
MC79L05ACLPR  
ACTIVE  
ACTIVE  
TO-92  
TO-92  
LP  
LP  
3
3
TBD  
Call TI  
CU SN  
Call TI  
0 to 125  
0 to 125  
79L05AC  
79L05AC  
2000  
2000  
Pb-Free  
(RoHS)  
N / A for Pkg Type  
MC79L05ACLPRE3  
ACTIVE  
TO-92  
LP  
3
Pb-Free  
(RoHS)  
CU SN  
N / A for Pkg Type  
0 to 125  
79L05AC  
MC79L05AILP  
MC79L05CD  
MC79L05CDR  
MC79L05CLP  
MC79L12ACD  
OBSOLETE  
OBSOLETE  
OBSOLETE  
OBSOLETE  
ACTIVE  
TO-92  
SOIC  
SOIC  
TO-92  
SOIC  
LP  
D
3
8
8
3
8
TBD  
TBD  
TBD  
TBD  
Call TI  
Call TI  
Call TI  
Call TI  
0 to 125  
0 to 125  
0 to 125  
0 to 125  
0 to 125  
D
Call TI  
Call TI  
LP  
D
Call TI  
Call TI  
75  
75  
Green (RoHS  
& no Sb/Br)  
CU NIPDAU  
Level-1-260C-UNLIM  
79L12A  
79L12A  
79L12A  
79L12A  
MC79L12ACDE4  
MC79L12ACDG4  
MC79L12ACDR  
ACTIVE  
ACTIVE  
ACTIVE  
SOIC  
SOIC  
SOIC  
D
D
D
8
8
8
Green (RoHS  
& no Sb/Br)  
CU NIPDAU  
CU NIPDAU  
CU NIPDAU  
Level-1-260C-UNLIM  
Level-1-260C-UNLIM  
Level-1-260C-UNLIM  
0 to 125  
0 to 125  
0 to 125  
75  
Green (RoHS  
& no Sb/Br)  
2500  
Green (RoHS  
& no Sb/Br)  
Addendum-Page 1  
PACKAGE OPTION ADDENDUM  
www.ti.com  
26-Aug-2013  
Orderable Device  
Status Package Type Package Pins Package  
Eco Plan Lead/Ball Finish  
MSL Peak Temp  
Op Temp (°C)  
0 to 125  
Device Marking  
Samples  
Drawing  
Qty  
(1)  
(2)  
(3)  
(4/5)  
MC79L12ACDRE4  
MC79L12ACDRG4  
MC79L12ACLP  
ACTIVE  
SOIC  
SOIC  
D
8
8
3
3
3
3
2500  
Green (RoHS  
& no Sb/Br)  
CU NIPDAU  
CU NIPDAU  
CU SN  
Level-1-260C-UNLIM  
Level-1-260C-UNLIM  
N / A for Pkg Type  
N / A for Pkg Type  
N / A for Pkg Type  
N / A for Pkg Type  
79L12A  
ACTIVE  
ACTIVE  
ACTIVE  
ACTIVE  
ACTIVE  
D
2500  
1000  
1000  
2000  
2000  
Green (RoHS  
& no Sb/Br)  
0 to 125  
79L12A  
TO-92  
TO-92  
TO-92  
TO-92  
LP  
LP  
LP  
LP  
Pb-Free  
(RoHS)  
0 to 125  
79L12AC  
79L12AC  
79L12AC  
79L12AC  
MC79L12ACLPE3  
MC79L12ACLPR  
MC79L12ACLPRE3  
Pb-Free  
(RoHS)  
CU SN  
0 to 125  
Pb-Free  
(RoHS)  
CU SN  
0 to 125  
Pb-Free  
(RoHS)  
CU SN  
0 to 125  
MC79L12CD  
MC79L12CLP  
OBSOLETE  
ACTIVE  
SOIC  
D
8
3
TBD  
Call TI  
CU SN  
Call TI  
0 to 125  
0 to 125  
TO-92  
LP  
1000  
1000  
Pb-Free  
(RoHS)  
N / A for Pkg Type  
79L12C  
79L12C  
MC79L12CLPE3  
ACTIVE  
TO-92  
LP  
3
Pb-Free  
(RoHS)  
CU SN  
N / A for Pkg Type  
0 to 125  
MC79L15ACD  
MC79L15ACLP  
OBSOLETE  
ACTIVE  
SOIC  
D
8
3
TBD  
Call TI  
CU SN  
Call TI  
0 to 125  
0 to 125  
TO-92  
LP  
1000  
1000  
2000  
2000  
Pb-Free  
(RoHS)  
N / A for Pkg Type  
79L15AC  
79L15AC  
79L15AC  
79L15AC  
MC79L15ACLPE3  
MC79L15ACLPR  
MC79L15ACLPRE3  
MC79L15CLP  
ACTIVE  
ACTIVE  
TO-92  
TO-92  
TO-92  
TO-92  
LP  
LP  
LP  
LP  
3
3
3
3
Pb-Free  
(RoHS)  
CU SN  
CU SN  
CU SN  
Call TI  
N / A for Pkg Type  
N / A for Pkg Type  
N / A for Pkg Type  
Call TI  
0 to 125  
0 to 125  
0 to 125  
Pb-Free  
(RoHS)  
ACTIVE  
Pb-Free  
(RoHS)  
OBSOLETE  
TBD  
(1) The marketing status values are defined as follows:  
ACTIVE: Product device recommended for new designs.  
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.  
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.  
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.  
OBSOLETE: TI has discontinued the production of the device.  
(2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability  
information and additional product content details.  
Addendum-Page 2  
PACKAGE OPTION ADDENDUM  
www.ti.com  
26-Aug-2013  
TBD: The Pb-Free/Green conversion plan has not been defined.  
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that  
lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.  
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between  
the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.  
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight  
in homogeneous material)  
(3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.  
(4) There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device.  
(5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation  
of the previous line and the two combined represent the entire Device Marking for that device.  
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information  
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and  
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.  
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.  
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.  
Addendum-Page 3  
PACKAGE MATERIALS INFORMATION  
www.ti.com  
19-Mar-2008  
TAPE AND REEL INFORMATION  
*All dimensions are nominal  
Device  
Package Package Pins  
Type Drawing  
SPQ  
Reel  
Reel  
A0 (mm)  
B0 (mm)  
K0 (mm)  
P1  
W
Pin1  
Diameter Width  
(mm) W1 (mm)  
(mm) (mm) Quadrant  
MC79L05ACDR  
MC79L12ACDR  
SOIC  
SOIC  
D
D
8
8
2500  
2500  
330.0  
330.0  
12.4  
12.4  
6.4  
6.4  
5.2  
5.2  
2.1  
2.1  
8.0  
8.0  
12.0  
12.0  
Q1  
Q1  
Pack Materials-Page 1  
PACKAGE MATERIALS INFORMATION  
www.ti.com  
19-Mar-2008  
*All dimensions are nominal  
Device  
Package Type Package Drawing Pins  
SPQ  
Length (mm) Width (mm) Height (mm)  
MC79L05ACDR  
MC79L12ACDR  
SOIC  
SOIC  
D
D
8
8
2500  
2500  
340.5  
340.5  
338.1  
338.1  
20.6  
20.6  
Pack Materials-Page 2  
IMPORTANT NOTICE  
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other  
changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest  
issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and  
complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale  
supplied at the time of order acknowledgment.  
TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms  
and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary  
to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily  
performed.  
TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and  
applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide  
adequate design and operating safeguards.  
TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or  
other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information  
published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or  
endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the  
third party, or a license from TI under the patents or other intellectual property of TI.  
Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration  
and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered  
documentation. Information of third parties may be subject to additional restrictions.  
Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service  
voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.  
TI is not responsible or liable for any such statements.  
Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements  
concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support  
that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which  
anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause  
harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use  
of any TI components in safety-critical applications.  
In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to  
help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and  
requirements. Nonetheless, such components are subject to these terms.  
No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties  
have executed a special agreement specifically governing such use.  
Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in  
military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components  
which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and  
regulatory requirements in connection with such use.  
TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of  
non-designated products, TI will not be responsible for any failure to meet ISO/TS16949.  
Products  
Applications  
Audio  
www.ti.com/audio  
amplifier.ti.com  
dataconverter.ti.com  
www.dlp.com  
Automotive and Transportation www.ti.com/automotive  
Communications and Telecom www.ti.com/communications  
Amplifiers  
Data Converters  
DLP® Products  
DSP  
Computers and Peripherals  
Consumer Electronics  
Energy and Lighting  
Industrial  
www.ti.com/computers  
www.ti.com/consumer-apps  
www.ti.com/energy  
dsp.ti.com  
Clocks and Timers  
Interface  
www.ti.com/clocks  
interface.ti.com  
logic.ti.com  
www.ti.com/industrial  
www.ti.com/medical  
Medical  
Logic  
Security  
www.ti.com/security  
Power Mgmt  
Microcontrollers  
RFID  
power.ti.com  
Space, Avionics and Defense  
Video and Imaging  
www.ti.com/space-avionics-defense  
www.ti.com/video  
microcontroller.ti.com  
www.ti-rfid.com  
www.ti.com/omap  
OMAP Applications Processors  
Wireless Connectivity  
TI E2E Community  
e2e.ti.com  
www.ti.com/wirelessconnectivity  
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265  
Copyright © 2013, Texas Instruments Incorporated