REVISION
THESE DRAWINGS ARE THE PROPERTY OF QUALTEK
ELECTRONICS AND NOT TO BE REPRODUCED FOR
OR COMMUNICATED TO A THIRD PARTY WITHOUT
THE EXPRESS WRITTEN PERMISSION OF AN OFFICER
OF QUALTEK ELECTRONICS.
REV.
B
DESCRIPTION
DATE
APPROVED
DP
RoHS Compliancy
06-01-06
ELECTRICAL CHARACTERISTICS:
1-1.
VOLTAGE RATING...................................115/250VAC
1. PHYSICAL DIMENSIONS
50.0
40.01
28.0
1-2.
CURRENT RATING
A. @ 115 VAC..........................................6 A RMS MAX
B. @ 250 VAC.........................................6 A RMS MAX
46.0
4.0
1-3.
1-4.
OPERATING FREQUENCY......................50/60Hz
LEAKAGE CURRENT: EACH LINE TO GROUND
A. @ 115 VAC 60Hz............................0.20 mA MAX
B. @ 250 VAC 50Hz.............................0.40 mA MAX
1-5.
1-6.
HIPOT RATING (FOR ONE MINUTE)
A. LINE TO GROUND...........................2250 VDC
B. LINE TO LINE.....................................1450 VDC
LABEL
Ø3.3 0.1(2X)
MINIMUM INSERTION LOSS IN dB: (AT 50 OHM SYSTEM)
2.0
R2.0
41.0
51.3
.10
.15
12
4
.50
18
10
1.0
24
15
5.0
35
35
10
40
40
30
40
40
.01
.05
FREQ. MHz
/
/
/
/
/
/
COM. MODE dB
DIF. MODE dB
1-7.
1-8.
1-9.
OPERATING TEMPERATURE.................-25° TO +85° C
SAFETY:
M3
RoHS COMPLIANT
0.2
0
28.4MAX
28.5
CONTROLLED
Qualtek Electronics Corp.
40.01 0.1
PANEL CUTOUT
(MOUNTING FROM FRONT)
Dim
range
(mm)
Tolerance
2. ELECTRICAL SCHEMATIC
PPC DIVISION
883-06/013
+/-
Part Number:
(mm)
Description:
0-1
1-6
0.15
0.20
0.30
0.50
0.70
0.90
1.20
L: 1.05mH
Cx: 0.1uF
Cy: 2200pF
R: 1.0MΩ
EMI FILTER
6-18
UNIT: mm
REV. B
18-50
50-120
120-250
250-500
Drawn / Date
Approved / Date
JJH / 04-17-03
Checked / Date
04-17-03
B.ZHANG
04-17-03
