(IWGVMTXMSR
Teccor’s 6-pin Battrax® product is designed to offer engineers an integrated over-voltage protection solution for SLIC based linecards.
Used in conjunction with Teccor’s TeleLink® fuse, Teccor can provide a complete solution for GR1089 surge immunity and power cross
requirements without the use of additional series power resistors. Such a solution not only reduces costs, but free’s up valuable PCB real
estate as well.
'SRWXVYGXMSRꢀERHꢀ3TIVEXMSR
Teccor’s 6-pin Battrax® devices are constructed using two SCR’s, two gate diodes, and two steering diodes. Typically referenced to VBATT
the gate diodes force the SCR’s to conduct when a voltage that is more negative than VREF is applied to the cathode (Pin 1 and 3) of the
gate diode. During conduction, the SCR’s appear as a low resistive path which allows all negative transients to be shorted to ground. All
transients with a positive polarity are passed through the steering diodes to ground.
,
Equivalent Circuit
Equivalent Circuit
V
REF
Ground
5
0.1µF
TIP
F1250T
S
L
I
B11UC
C
F1250T
RING
1
3
2
Tip
Ring
VREF
)PIGXVMGEPꢀ7TIGMJMGEXMSRW
Values
Parameters
Description
Test Condtions
Min
Max
VREF
VKT
VDRM
VS
Operating Reference Voltage
Cathode Trigger Voltage
Blocking Voltage
VDC
VREF - VK
VDC
-10V
-1V
-200V
-5V
VREF - 1V
VREF - 10V
3V
Switching Voltage
100V/µs
IT=1A
VT
On-State Voltage
VS= -48V
VK= -45V
IDRM
Leakage Current
5µA
IGT
IT
Gate Current
IREF - IK
60Hz
50mA
1A
Maximum Continuous On-State Current
B1101U_
B1161U_
B1201U_
100mA
160mA
200mA
IH
Holding Current
Off-State Current
1MHz
VK= -2V
VS= -48V
CO
80pF
Note:
1. Thermal resistance: junction to ambient is 85°C/W
Teccor Electronics
http://www.teccor.com