转到网站首页
转为中文步骤：
1、请用电脑端360浏览器打开本页地址，如您电脑未安装360浏览器，请点这里下载;
2、点击360浏览器右上角的翻译插件，如右图红圈中所示:
3、点击所弹出窗口里的右下角的按钮 “翻译当前网页”;
4、弹窗提示翻译完毕后关闭弹窗即可；
SIDACtor® ProtectionThyristors  
SLIC Protection  
Battrax® Protection Thyristor Series Single Port Positive/Negative - MS-013  
Pb e3  
RoHS  
Description  
The Single Port Positive/Negative Battrax® Protection  
Thyristor Series are programmable SIDACtor® components  
designed to protect SLICs (Subscriber Line Interface  
Circuit) from damaging overvoltage transients.  
This series is designed specifically to protect SLIC devices  
utilizing positive and negative ringing signals. This one  
device will protect a single port.  
Features and Benefits  
• Low voltage overshoot  
• Low on-state voltage  
• Gate trigger tracking  
device  
Agency Approvals  
• RoHS Compliant and  
Lead-Free  
• Does not degrade surge  
capability after multiple  
surge events within  
limit.  
Agency  
Agency File Number  
• Pb-free E3 means 2nd  
level interconnect is  
Pb-free and the terminal  
finish material is tin(Sn)  
(IPC/JEDEC J-STD-  
609A.01)  
E133083  
• Fails short circuit when  
surged in excess of  
ratings  
Pinout Designation  
• Low capacitance  
1
2
6
5
• Recognized to UL 497B  
as an Isolated Loop  
Circuit Protector  
• Positive and negative  
ringing compatible  
• Single-port protect  
3
4
Applicable Global Standards  
Schematic Symbol  
• TIA-968-A  
• TIA-968-B  
• GR 1089 Intra-building  
6 (Ground)  
(T) 1  
• IEC 61000-4-5 2nd  
edition  
• ITU K.20/21 Enhanced  
Level  
• YD/T 1082  
• YD/T 993  
• YD/T 950  
(-VREF) 2  
5 (+VREF  
)
• ITU K.20/21 Basic Level  
• GR 1089 Inter-building  
(R) 3  
4 (Ground)  
Additional Information  
Datasheet  
Resources  
Samples  
© 2020 Littelfuse, Inc.  
Specifications are subject to change without notice.  
Revised: 02/05/20  
SIDACtor® ProtectionThyristors  
SLIC Protection  
Electrical Characteristics  
VDRM  
@lDRM=5µA  
VS  
VT  
IH  
IS  
IT  
Capacitance*  
@100V/µs  
@IT=2.2 Amps  
Part Number  
Marking  
V min  
V max  
mA min  
mA max  
A max  
V max  
pF min  
pF max  
B3104UCLxx  
B3164UCLxx  
B3204UCLxx  
B3104UALxx  
B3164UALxx  
B3204UALxx  
B3104UC  
B3164UC  
B3204UC  
B3104UA  
B3164UA  
B3204UA  
I±±REFI + I±1.2±I  
I±±REFI + I±10±I  
100  
100  
2.2  
4
30  
30  
30  
30  
30  
30  
200  
I±±REFI + I±1.2±I  
I±±REFI + I±1.2±I  
I±±REFI + I±1.2±I  
I±±REFI + I±1.2±I  
I±±REFI + I±1.2±I  
I±±REFI + I±10±I  
I±±REFI + I±10±I  
I±±REFI + I±10±I  
I±±REFI + I±10±I  
I±±REFI + I±10±I  
160  
200  
100  
100  
100  
100  
100  
100  
100  
100  
2.2  
2.2  
2.2  
2.2  
2.2  
4
4
4
4
4
200  
200  
200  
200  
200  
Notes:  
- VREF Max Value for the negative Battrax is -200 V.  
- VREF Max Value for the positive Battrax is +110 V.  
- XX = Part Number Suffix: ‘TP’ (Tube Pack) or ‘RP’ (Reel Pack).  
* Off-state capacitance (CO) is measured across pins 1 & 4,6 and 3 & 4,6  
at 1 MHz with a 2V bias.  
- Absolute maximum ratings measured at TA= 25ºC (unless otherwise noted).  
- Components are bi-directional  
- All electrical characteristics shown are defined from Tip (pin 1) to Ground (pin 4 & 6) and Ring (pin 3) to Ground  
(pin 4 & 6)  
Surge Ratings  
IPP  
ITSM  
50/60 Hz  
di/dt  
0.2/310 1  
0.5/700 2  
2/10 1  
2/10 2  
8/20 1  
10/160 1  
10/160 2  
10/560 1  
10/560 2  
5/320 1  
9/720 2  
10/360 1  
10/360 2  
10/1000 1  
10/1000 2  
5/310 1  
1.2/50 2  
10/700 2  
A min  
50  
A min  
500  
A min  
400  
A min  
200  
A min  
150  
A min  
200  
A min  
175  
A min  
100  
A min  
200  
A min  
50  
A/µs max  
500  
C
A
20  
150  
150  
90  
50  
75  
75  
45  
75  
20  
500  
Notes:  
1. Current waveform in µs  
2. Voltage waveform in µs  
- Peak pulse current rating (IPP) is repetitive and guaranteed for the life of the product that remains in thermal equilibrium.  
- IPP ratings applicable over temperature range of -40ºC to +85ºC (IPP rating assumes VREF equals +/- 48 V)  
- The component must initially be in thermal equilibrium with -40°C < TJ < +150°C  
Thermal Considerations  
Package  
Symbol  
TJ  
Parameter  
Value  
Unit  
°C  
Modified MS-013  
Operating JunctionTemperature Range  
StorageTemperature Range  
-40 to +125  
-65 to +150  
60  
6
5
4
TS  
°C  
1
2
3
RƟJA  
Thermal Resistance: Junction to Ambient  
°C/W  
V-I Characteristics  
tr x td PulseWaveform  
+I  
IPP  
tr = rise time to peak value  
td = decay time to half value  
VS  
VDRM  
Peak  
Value  
100  
IH  
VREF  
VS  
-VREF  
VDRM  
Waveform = tr x td  
IS  
VT  
IDRM  
+V  
50  
0
-V  
Half Value  
IDRM  
IH  
IS  
IT  
tr  
td  
0
IPP  
t – Time (µs)  
-I  
© 2020 Littelfuse, Inc.  
Specifications are subject to change without notice.  
Revised: 02/05/20  
SIDACtor® ProtectionThyristors  
SLIC Protection  
NormalizedVS Change vs. JunctionTemperature  
Normalized DC Holding Current vs. CaseTemperature  
2.0  
1.8  
1.6  
1.4  
1.2  
1.0  
0.8  
0.6  
0.4  
14  
12  
10  
8
6
4
25 °C  
25°C  
2
0
-4  
-6  
-8  
-40 -20  
0
20 40 60 80 100 120 140 160  
-40 -20  
0
20 40 60  
80 100 120 140 160  
JunctionTemperature (TJ) – °C  
CaseTemperature (TC) - ºC  
Soldering Parameters  
Reflow Condition  
Pb-Free assembly  
+150°C  
Figure 1  
-Temperature Min (Ts(min)  
-Temperature Max (Ts(max)  
-Time (Min to Max) (ts)  
)
tP  
TP  
TL  
Pre Heat  
)
+200°C  
Critical Zone  
L to TP  
Ramp-up  
T
60-180 secs.  
Average ramp up rate (LiquidusTemp (TL) to peak) 3°C/sec. Max.  
tL  
TS(max)  
T
S(max) toTL - Ramp-up Rate  
3°C/sec. Max.  
+217°C  
Ramp-down  
-Temperature (TL) (Liquidus)  
-Temperature (tL)  
Reflow  
Preheat  
60-150 secs.  
+260(+0/-5)°C  
30 secs. Max.  
6°C/sec. Max.  
8 min. Max.  
+260°C  
TS(min)  
tS  
PeakTemp (TP)  
Time within 5°C of actual PeakTemp (tp)  
Ramp-down Rate  
25  
time to peak temperature  
(t 25ºC to peak)  
Time  
Time 25°C to PeakTemp (TP)  
Do not exceed  
Environmental Specifications  
Physical Specifications  
Lead Material  
Copper Alloy  
80% Rated ±DRM (±DC Peak) +125°C or +150°C, 504  
or 1008 hrs. MIL-STD-750 (Method 1040) JEDEC,  
JESD22-A-101  
HighTempVoltage  
Blocking  
Terminal Finish  
100% Matte-Tin Plated  
UL Recognized epoxy meeting flammability  
classification ±-0  
Body Material  
-65°C to +150°C, 15 min. dwell, 10 up to 100  
cycles. MIL-STD-750 (Method 1051) EIA/JEDEC,  
JESD22-A104  
Temp Cycling  
BiasedTemp &  
Humidity  
52 ±DC (+85°C) 85%RH, 504 up to 1008 hrs. EIA/  
JEDEC, JESD22-A-101  
+150°C 1008 hrs. MIL-STD-750 (Method 1031)  
JEDEC, JESD22-A-101  
HighTemp Storage  
LowTemp Storage  
-65°C, 1008 hrs.  
0°C to +100°C, 5 min. dwell, 10 sec. transfer,  
10 cycles. MIL-STD-750 (Method 1056) JEDEC,  
JESD22-A-106  
Thermal Shock  
Autoclave (Pressure  
CookerTest)  
+121°C, 100%RH, 2atm, 24 up to 168 hrs. EIA/  
JEDEC, JESD22-A-102  
Resistance to Solder  
Heat  
+260°C, 30 secs. MIL-STD-750 (Method 2031)  
Moisture Sensitivity 85%RH, +85°C, 168 hrs., 3 reflow cycles (+260°C  
Level Peak). JEDEC-J-STD-020, Level 1  
© 2020 Littelfuse, Inc.  
Specifications are subject to change without notice.  
Revised: 02/05/20  
SIDACtor® ProtectionThyristors  
SLIC Protection  
Part Numbering  
Part Marking  
B3 xx 4 U C L xx  
Packing Options  
Type  
RP: Reel Pack  
TP: Tube Pack  
Part Marking Code  
B3: Dual (Positive & Negative  
Battrax SIDACtor)  
(Refer to Electrical Characteristics Table)  
XXXXXXX  
XXXXX  
RoHS Compliant  
IPP Rating  
Date Code  
Holding Current  
10: 100 mA  
20: 200 mA  
16: 160 mA  
Package Type  
Construction Variable  
Dimensions — MS-013  
Inches  
Min  
Millimeters  
Dimensions  
Max  
0.364  
0.356  
0.412  
0.045  
0.055  
0.297  
0.293  
0.093  
0.049  
Min  
9.14  
8.94  
10.16  
1.09  
1.19  
7.44  
Max  
9.25  
9.04  
10.46  
1.13  
A
B
0.360  
0.352  
0.400  
0.043  
0.047  
0.293  
0.289  
0.089  
0.041  
0.020  
0.133  
0.065  
(1.65)  
Pad Outline  
C
0.460  
(11.68)  
C
0.138  
(3.50)  
Dimension are in inches  
(and millimeters).  
0.059  
(1.50)  
D
E
E
1.40  
7.54  
F
D
7º TYP  
J
G
7.34  
7.44  
7º TYP  
A
G
F
H
2.26  
1.04  
0.51  
3.38  
2.36  
1.24  
Burr Side  
H
96º  
A
J
Mold Split  
Line  
4º  
K
A
Detail A  
MIN Length  
of Flat  
7º TYP  
K
BSC*  
BSC*  
0.143  
3.63  
7º TYP  
B
* BSC = Basic Spacing between Centers  
Packing Options  
PackageType  
Description  
Quantity  
Added Suffix  
Industry Standard  
Modified MS-013 6-pinTape and Reel Pack  
Modified MS-013 6-pinTube Pack  
1500  
RP  
TP  
EIA-481-D  
N/A  
U
500 (50 per tube)  
© 2020 Littelfuse, Inc.  
Specifications are subject to change without notice.  
Revised: 02/05/20  
SIDACtor® ProtectionThyristors  
SLIC Protection  
Tape and Reel Specification — MS-013  
.157  
(4.0)  
.630  
(16.0)  
.472  
(12.0)  
12.99  
(330)  
.512 (13.0) Arbor  
Hole Dia.  
Dimensions are in inches  
(and millimeters)  
0.700  
(17.8)  
Direction of Feed  
Tube Pack Specification — MS-013  
Message Location  
.020 .005  
WALL TYP.  
.045  
(0.51 0.13)  
20.000 .030  
.310  
(7.87)  
(1.14)  
(508.00 0.7ꢀ)  
.108  
(2.74)  
90°  
.005  
A
.110  
(2.79)  
ꢀ
.165  
Interior of the Tube  
(4.19)  
A
.225  
.150  
(3.81)  
(5.72)  
Dimensions are in inches  
(and millimeters)  
.525  
(13.34)  
Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are  
not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at www.littelfuse.com/disclaimer-electronics.  
© 2020 Littelfuse, Inc.  
Specifications are subject to change without notice.  
Revised: 02/05/20