1401  
					Vishay Foil Resistors  
					Bulk Metal® Foil Technology  
					3 Pin Transistor Outline Hermetic Resistor Network  
					The three pin TO-18 package is suitable for single resistor  
					hermetic packaging with case and lid grounded for electrical  
					isolation. This unique package may also be used to provide a  
					voltagedivider, buttheuseriscautionedthatthecentertapmust  
					go to ground.  
					Review data sheet “7 Technical Reasons to Specify Bulk  
					Product may not  
					®
					Metal Foil Resistor Networks.”  
					be to scale  
					ORDERING INFORMATION - 1401 PARTS  
					Networks are built to your requirements. Send your schematic  
					and electrical requirements to the Applications Engineering  
					Department. (See data sheet “Network Worksheet.”) A unique  
					part number will be assigned which defines all aspects of your  
					network.  
					3 pins on a 0.100" pin circle– pin 3 case grounded.  
					FIGURE 1 - STANDARD DIMENSIONS in inches (millimeters)  
					DIAMETER  
					0.178 –0.195  
					(4.52 –4.95)  
					VISHAY  
					MODEL NUMBER  
					CHIP  
					CAPACITY  
					MAXIMUM POWER RATING  
					(WATTS) @ +70°C  
					3
					CASE  
					GROUNDED  
					V15X5 - 1 chip  
					0.200  
					(5.08)  
					0.100  
					(2.54)  
					V15X5 - 1 chip  
					and  
					MAXIMUM  
					2
					1401  
					0.15 Watt  
					V5X5 - 1 chip  
					45°  
					1
					V5X5 - 2 chips  
					0.500  
					(12.7)  
					MINIMUM  
					0.036 –0.046  
					(0.91 –1.17)  
					NOTES:  
					1. These networks utilize Vishay Bulk Metal® Foil resistor  
					chips V5X5 and V15X5 or VTF15X10 Thin Film chips.  
					0.028 –0.048  
					(0.71 –1.22)  
					3 LEADS  
					0.016 –0.021  
					(0.41 –0.48)  
					0.209 –0.230  
					(5.31 –5.84)  
					(VIEWED FROM BOTTOM)  
					2. The V5X5 and V15X5 chips have maximum resistance  
					values of 10K and 33K respectively in Bulk Metal® Foil  
					and 500K in VTF15X5 Thin Film chips.  
					DIAMETER  
					FIGURE 2 - SAMPLE CIRCUIT DESIGNS AND CHIP LAYOUTS  
					NOTE: Usable area is represented by the dotted lines— a cross 0.150 Inches x 0.150 Inches with arm width of 0.05 Inches.  
					Illustrations not to scale. Chips shown undersize for clarity. Drawing view is from the top looking down into the  
					package.  
					2
					1
					2
					1
					3
					R1  
					R1  
					R1  
					R2  
					R1 R2  
					2
					3
					3
					1
					2
					CASE  
					CASE  
					ONE RESISTOR  
					CASE GROUNDED  
					DIVIDER  
					CENTER TAP GROUNDED  
					VISHAY FOIL • FRANCE +33.4.93.37.28.24 FAX: +33.4.93.37.27.31 • ITALY + 39.2.300.11919 FAX: +39.2.300.11999  
					• SWEDEN +46.8.594.70590 FAX: +46.8.594.70581  
					• UK +44 191 514 8237 FAX: +44 1953 457 722  
					• USA +1 610 407-4800 FAX: +1 610 640-9081  
					• GERMANY +49.9287.710 FAX: +49 9287.70435  
					• ISRAEL +972.3.557.0945 FAX: +972.3.558.9121  
					• JAPAN +81.42.729.0661 FAX: +81.42.729.3400  
					• SINGAPORE +65.788.6668 FAX: +65.788.0988  
					Document Number: 63037  
					Revision 31-Jul-02  
					www.vishay.com  
					119