LDC480--Datasheet/数据表在线中文翻译

LDC480 Series is a single phase, extremely compact Power Supply

with active PFC specially designed for space sensitive and demanding

applications.

Its compact size, high efficiency, excellent reliability together with easy

installation makes it ideal for various industrial applications.

LDC480 Series is Class I isolation device suitable for SELV and PELV

circuitry (up to 48 VDC models) and is designed to be mounted on DIN

rail and installed inside a protective enclosure.

High efficiency and extremely compact size

Only 56 mm width aluminum enclosure

Active PFC



Overload 150%

Constant current or hiccup mode limitation, user settable

Wide range of output voltage

Easy parallelable for power increase

Up to 60°C operating temperature with no derating

Industrial Control



Communication



Instrumentation Equipment

Renewable energy

High reliability applications

LDC480 Series

LDC480-24

120 - 240 VAC (110 - 345 VDC)

24 VDC

36 VDC

48 VDC

72 VDC

20 A

15 A

10 A

6.7 A

LDC480-24P

LDC480-36

LDC480-36P

LDC480-48

LDC480-48P

LDC480-72

LDC480-72P

Includes internal ORing diode

Technical parameters are typical, measured in laboratory environment at 25°C and 240 VAC / 50 Hz, at nominal values, after minimum

5 minutes of operation.

Rated, UL certified

Operating

120 – 240 VAC

90 - 264 VAC

Input AC Voltage Range

Input DC Voltage Range

Input Frequency Range

Rated

110 - 345 VDC

47 - 63 Hz

Vin = 120 VAC

Vin = 230 VAC

4.8 A

2.4 A

Input AC Current

Input DC Current

Vin = 110 VDC

Vin = 345 VDC

4.9 A

1.7 A

Power Factor Correction

Inrush Peak Current

Active

> 0.9

≤ 35 A

≤ 0.9 mA

8 AT

Touch (Leakage) Current

Internal Protection Fuse

Not user replaceable

It is strongly recommended to provide external surge

arresters (SPD) according to local regulations.

Fuse 10 AT or MCB 10 A C curve

Recommended External Protection

Output Power

480 W

LDC480-24

LDC480-36

LDC480-48

LDC480-72

LDC480-24

LDC480-36

LDC480-48

LDC480-72

LDC480-24

LDC480-36

LDC480-48

LDC480-72

LDC480-24

LDC480-36

LDC480-48

LDC480-72

24 VDC (22 - 29 VDC)

36 VDC (34 - 39 VDC)

48 VDC (45 - 55 VDC)

72 VDC (70 - 85 VDC)

Rated Voltage

(Adjustable Output Voltage Range)

20 A

15 A

10 A

6.7 A

21 A

16 A

12 A

7 A

30 A

20 A

17 A

12 A

Continuous Current

Overload Limit (Constant Current Mode)

Overload Limit (Hiccup mode) (max. 5 s)

tech.support@psbel.com

LDC480 Series

LDC480-24 / LDC480-36

LDC480-48 / LDC480-72

LDC480-24 / LDC480-36

LDC480-48 / LDC480-72

≤ 1.5%

≤ 0.5%

≤ 150 mVpp

≤ 50 mVpp

Load Regulation

Ripple & Noise¹

Hold up Time

≥ 25 ms

Overload, short circuit, with constant current or hiccup mode (user settable)

Thermal protection

Input undervoltage lockout

Output overvoltage

Protections

LDC480-24

LDC480-36

LDC480-48

LDC480-72

≥ 33 VDC

≥ 45 VDC

≥ 68 VDC

≥ 100 VDC

Output Over Voltage Protection

Status Signals

DC OK - green LED

OVERLOAD - red LED

DC OK - dry contact (NO, 24 VDC / 1 A)

Possible for power or redundancy (with external ORing module)

P (models) - include internal ORing circuit

LDC480-24 / LDC480-36

LDC480-48 / LDC480-72

LDC480-24 / LDC480-36

LDC480-48 / LDC480-72

Parallel Connection²

Efficiency

> 93%

> 94%

< 36.5 W

< 31 W

Dissipated Power

Ripple and Noise are measured with 20 MHz bandwidth, probe terminated with a 0.1μF MKP parallel capacitor.

Pay attention, set the current limitation mode jumper on C.C. mode when connecting more units in parallel.

NOTE: Power rating, losses, efficiency, ripple, thermal behaviour and start-up may change outside of the nominal rated input range.

Contact factory for details.

UL certified up to 50°C at 120 VAC or

Operating Temperature

Storage Temperature

Derating

- 40° to + 70°C

- 40° to + 80°C

- 7.6 W / °C over 50°C at 120 VAC

- 7.2 W / °C over 60°C at 240 VAC

up to 60°C at 240 VAC (Start-up type tested: - 40°C)³

Humidity

Non condensing

5 - 95% RH

Life Time Expectancy

At 25°C ambient, full load

167953 h (19.1 years)

Overvoltage Category

Pollution Degree

III (EN50178)

2 (IEC60664-1)

Protection Class

Class I

Input to Output

Input to Ground

Output to Ground

UL508 (certified)

EN60950 (reference)

EN50178 (reference)

EN55011 (CISPR11)

EN55022 (CISPR22)

EN61000-3-2

EN61000-4-2

EN61000-4-3

EN61000-4-4

EN61000-4-5

4.2 kVDC

2.2 kVDC

0.75 kVDC

Isolation Voltage

Safety Standards & Approvals

Class B

Class A

Level 3

Level 4

Level 2

Emission

EMC Standards

Immunity

EN61000-4-11

Protection Degree

Vibration Sinusoidal

EN60529

IP20

5-17.8 Hz: ±1.6 mm;

IEC 60068-2-6

17.8-500 Hz: 2 g 2Hours / axis (X,Y,Z)

30 g 6 ms, 20 g 11 ms; 3 bumps / direction,

18 bumps total

Shock

IEC 60068-2-27

Possible with load derating.

North America

Asia-Pacific

Europe, Middle East

+1 408 785 5200

+86 755 298 85888

+353 61 225 977

BCD.00757_AB

LDC480 Series

Weight

1.1 kg

Dimensions (W x H x D)

Mounting Rail

56 x 140 x 117 mm

IEC 60715/H15/TH35-7.5(-15)

2.5 mm²

Connection Terminals

Case Material

Screw type pluggable (24 - 12 AWG)

Aluminum

INPUT CONNECTION

OUTPUT CONNECTION

Single phase:

L = Line

N = Neutral

= Earth ground

DC:

L = + Positive DC

N = - Negative DC

= Earth ground

AC/DC input

+ = Positive DC

- = Negative DC

DC output (load)

Diagnostic Output

(dry contact, NC output OK)

Green LED: Output OK

Signaling:

DC OK: dry contact

COM

Red LED: Overload

Output voltage adjustment

Selectable limitation mode

(Hiccup mode, C.C. mode)

Figure 1. Mechanical Drawing

NUCLEAR AND MEDICAL APPLICATIONS - Products are not designed or intended for use as critical components in life support systems,

equipment used in hazardous environments, or nuclear control systems.

TECHNICAL REVISIONS - The appearance of products, including safety agency certifications pictured on labels, may change depending on the

date manufactured. Specifications are subject to change without notice.

tech.support@psbel.com