1N4001_18--Datasheet/数据表在线中文翻译

1 N 4 0 0 1

THRU

1 N 4 0 0 7

1.0A AXIAL SILICON RECTIFIERS - 50V- 1000V

DO- 41 PACKAGE

FEATURES

* Low cost

* Low leakage

* Low forward voltage drop

* High current capability

* RoHS product for packing code suffix "G",

DO-41

Halogen free product for packing code suffix "H" .

Moisture Sensitivity Level 1

MECHANICAL DATA

* Case: Molded plastic

.034(0.90)

.028(0.70)

* Epoxy: UL 94V-O rate flame retardant

* Lead: MIL-STD-202E method 208G guaranteed

* Mounting position: Any

* Weight: Approximate 0.33 gram

.205(5.21)

.165(4.19)

.117(2.97)

.080(2.00)

MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS

Ratings at 25 ^oC ambient temperature unless otherwise specified.

Single phase, half wave, 60 Hz, resistive or inductive load.

For capacitive load, derate current by 20%.

Dimensions in inches and (millimeters)

MAXIMUM RATINGS (At T

= 25^oC unless otherwise noted)

RATINGS

SYMBOL

1N4001 1N4002 1N4003 1N4004 1N4005 1N4006 1N4007 UNITS

RRM

RMS

Volts

Maximum Recurrent Peak Reverse Voltage

Maximum RMS Voltage

100

200

140

200

400

280

400

600

420

600

800

560

800

1000

700

Maximum DC Blocking Voltage

100

1000

Maximum Average Forward Rectified Current

1.0

Amps

at TA

= 75^oC

Peak Forward Surge Current 8.3 ms single half sine-wave

superimposed on rated load (JEDEC method)

FSM

Typical Junction Capacitance (Note1)

Typical Thermal Resistance

⁰C/ W

⁰C

R θ J A

50 / 18

/ R θ J C

, TSTG

-65 to + 175

Operating and Storage Temperature Range

ELECTRICAL CHARACTERISTICS (At TA

= 25^oC unless otherwise noted)

SYMBOL

1N4001 1N4002 1N4003 1N4004 1N4005 1N4006 1N4007 UNITS

CHARACTERISTICS

1.1

5.0

Volts

Maximum Instantaneous Forward Voltage at 1.0A DC

Maximum DC Reverse Current

at Rated DC Blocking Voltage

= 25^oC

= 100^oC

uAmps

Maximum Full Load Reverse Current Average, Full Cycle

.375” (9.5mm) lead length at T

= 75^oC

Maximum Reverse Recovery Time (Note 2)

uAmps

Trr

F R

NOTES: 1.Test Conditions: I = 0.5A, I

= 1.0A, I_RR= 0.25A.

2. Measured at 1 MHz and applied reverse voltage of 4.0 volts.

2013-05

WILLAS ELECTRONIC CORP.

1 N 4 0 0 1

THRU

1 N 4 0 0 7

1.0A AXIAL SILICON RECTIFIERS - 50V- 1000V

DO- 41 PACKAGE

2013-05

WILLAS ELECTRONIC CORP.

1 N 4 0 0 1

THRU

1 N 4 0 0 7

1.0A AXIAL SILICON RECTIFIERS - 50V- 1000V

DO- 41 PACKAGE

Ordering Information:

Device PN

Packing

Part Number -E⁽¹⁾G⁽²⁾-WS

Part Number -F⁽¹⁾G⁽²⁾-WS

Part Number -B⁽¹⁾G⁽²⁾-WS

Tape Pitch:26.0±0.5mm & Ammo Packing:3Kpcs/box

Tape Pitch 52.4±0.5mm,& Ammo Packing:3Kpcs/box

Bulk Packing: 1Kpcs/Box

Note: 1. Packing code, E, F Tape pitch specifications & Ammo Packing; B: Bulk Packing.

2. RoHS product for packing code suffix ”G”, Halogen free product for packing code suffix "H" .

***Disclaimer***

WILLAS reserves the right to make changes without notice to any product

specification herein, to make corrections, modifications, enhancements or other

changes. WILLAS or anyone on its behalf assumes no responsibility or liability

for any errors or inaccuracies. Data sheet specifications and its information

contained are intended to provide a product description only. "Typical" parameters

which may be included on WILLAS data sheets and/ or specifications can

and do vary in different applications and actual performance may vary over time.

WILLAS does not assume any liability arising out of the application or

use of any product or circuit.

WILLAS products are not designed, intended or authorized for use in medical,

life-saving implant or other applications intended for life-sustaining or other related

applications where a failure or malfunction of component or circuitry may directly

or indirectly cause injury or threaten a life without expressed written approval

of WILLAS. Customers using or selling WILLAS components for use in

such applications do so at their own risk and shall agree to fully indemnify WILLAS

Inc and its subsidiaries harmless against all claims, damages and expenditures.

2013-05

WILLAS ELECTRONIC CORP.