1N4001 thru 1N4007
General Purpose Plastic Rectifiers
Reverse Voltage 50 to 1000 Volts Forward Current 1.0 Ampere
Features
Plastic package has Underwriters Laboratories Flammability
Classification 94V-0
Construction utilizes void-free molded plastic technique
Low reverse leakage
High forward surge capability
High temperature soldering guaranteed:
250oC/10 seconds, 0.375" (9.5mm) lead length,
5 lbs. (2.3kg) tension
TJ is 150oC (Max.) and TSTG is 175oC (Max.) with PI glue
Mechanical Data
Case: JEDEC DO-204AL (DO-41)/A-405, molded plastic body
Terminals: Plated axial leads, solderable per MIL-STD-750,
Method 2026
Polarity: Color band denotes cathode end
Mounting Position: Any
Weight: DO-41 - 0.012 ounce, 0.33 gram
A-405 - 0.008 ounce, 0.23 gram
Note: Lead diameter is 0.025(0.64)/0.021(0.53) for suffix “S” part numbers
Maximum Ratings and Electrical Characteristics
Ratings at 25oC ambient temperature unless otherwise specified.
Parameter
Symbols
1N4001
1N4002
1N4003
1N4004
1N4005
1N4006
1N4007
Units
Maximum repetitive peak reverse voltage
Maximum RMS voltage
VRRM
VRMS
VDC
50
35
50
100
70
200
140
200
400
280
400
600
420
600
800
560
800
1000
700
Volts
Volts
Volts
Maximum DC blocking voltage
100
1000
Maximum average forward rectified current
0.375" (9.5mm) lead length at TA=50oC
IF(AV)
1.0
Amp
Peak forward surge current
8.3ms single half sine-wave superimposed on
IFSM
30.0
Amps
rated load (JEDEC Method) TA=50oC
Maximum full load reverse current, full cycle
uA
Volts
uA
IR(AV)
VF
IR
30
average 0.375" (9.5mm) lead length at TL=75oC
Maximum instantaneous forward voltage at 1.0A
1.1
Maximum DC reverse current
at rated DC blocking voltage
TA=25oC
5.0
50
TA=100oC
Typical reverse recovery time at
IFM=20mA, IRM=1mA (Note 2)
uS
pF
trr
1.0
15
Typical junction capacitance at 4.0V, 1MHz
Typical thermal resistance (Note 1)
CJ
RθJA
RθJL
50.0
25.0
oC/W
Operating junction temperature range
Storage temperature range
TJ
-55 to +125
-55 to +150
oC
oC
TSTG
Notes:
1. Thermal resistance from junction to ambient, and from junction to lead at 0.375" (9.5mm) lead length, P.C.B. mounted
2. Measured on Tektronix type "S" recovery plug-in. Tektronix 545 scope or equivalent
49
