Automotive MLCC
General Specifications
GENERAL DESCRIPTION
AVX Corporation has supported the Automotive Industry requirements for Multilayer Ceramic Capacitors
consistently for more than 25 years. Products have been developed and tested specifically for automotive
applications and all manufacturing facilities are QS9000 and VDA 6.4 approved.
AVX is using AECQ200 as the qualification vehicle for this transition. A detailed qualification package is available
on request and contains results on a range of part numbers.
HOW TO ORDER
0805
5
A
104
K
4
T
2
A
Voltage
6.3V = 6
10V = Z
16V = Y
25V = 3
35V = D
50V = 5
100V = 1
200V = 2
500V = 7
Dielectric
NP0 = A
X7R = C
X8R = F
Capacitance
Code (In pF)
2 Sig. Digits +
Number of Zeros
e.g. 10 F = 106
Failure
Terminations
Packaging Special Code
Size
0402
0603
0805
1206
1210
1812
Capacitance
Tolerance
Rate
T = Plated Ni and Sn 2 = 7" Reel
Z = FLEXITERM®** 4 = 13" Reel
U = Conductive Epo
A = Std.Product
F = ±1% (≥10pF)*
G = ±2% (≥10pF)*
J = ±5% (≤1μF)
K = ±10%
4=Automotive
**X7R
X8R only
M = ±20%
Contact factory for availability of Tolerance Options for Specific Part Numbers.
*NPO only
NOTE: Contact factory for non-specified capacitance values
0402 case size available in T termination only.
COMMERCIAL VS AUTOMOTIVE MLCC PROCESS COMPARISON
Commercial
Automotive
Standard Part Numbers.
No restriction on who purchases these parts.
Specific Automotive Part Number. sed to control
supply of product to Automotive customers.
Administrative
Design
Minimum Ceramic thickness of 0.029” (0.74mm) on
all X7R product.
Minimum ceramic thickness of 0.020”
Side & End Margins = 0.003” min
Side & End Margins = 0.004” min Cover Layers =
0.003” min
Dicing
Lot Qualification
(Destructive Physical
Analysis - DPA)
As per EIA RS469
Increased sample plan stricter criteria.
100% inspection
Visual/Cosmetic Quality
Standard process and inspection
Standard sampling for accelerated wave solder Increased sampling for accelerated wave solder on
on X7R dielectrics X7R and NP0 followed by lot by lot reliability testing.
Application Robustness
All Tests have Accept/Reject Criteria 0/1
53
080619
