MODEL: 6BLC
Field-mounted Two-wire
[3] MOUNTING BRACKET
0: Without
Signal Conditioners 6B-UNIT
1: With
STRAIN GAUGE TRANSMITTER
Functions & Features
PACKAGE INCLUDES...
• Mounting screws
• IP66 / IP67 housing enables field mounting
• Stainless steel field housing selectable
• Used in conjunction with bridge type strain gauges utilized
in load cells, pressure transducers, etc.
• Excitation in pulses enables use with strain gauges of the
bridge resistance 350 Ω
Bolt (M8 x 15): 4
Spring washer for M8: 4
Material: Stainless steel 304
• Mounting bracket assembly (option):
Mounting bracket: 1
M10 U-bolt: 2
• Non-isolated
Nut for M10: 4
• Zero adjustment range: 0 to 80 %, span adjustment range
100 to 20 %
Spring washer for M10: 4
Material: Stainless steel 304
Applicable pipe: 1 1/2” min.; 2” max.
GENERAL SPECIFICATIONS
Degree of protection: NEMA 4X, IP66/IP67
Wiring conduit: See ‘Ordering information.’
Electrical connection: M3 screw terminals
(torque 0.6 N·m)
Materials
• Transmitter housing: Diecast aluminum
Screw terminals: Nickel-plated steel
• Enclosure: Diecast aluminum or stainless steel casting
(equivalent to type 316); silver color, epoxy resin coated
Isolation: Input or output to outdoor enclosure
Zero adjustment: 0 – 80 % (behind the access cover)
Span adjustment: 100 – 20 % (behind the access cover)
MODEL: 6BLC-02[1][2][3]
ORDERING INFORMATION
• Code number: 6BLC-02[1][2][3]
Specify a code from below for each of [1] through [3].
(e.g. 6BLC-020A1)
INPUT SPECIFICATIONS
Input: Bridge voltage from load cells
Rated output from strain gauge: 2 mV/V
Nominal bridge resistance: 350 Ω minimum
Excitation: 5 V voltage pulse
SAFETY APPROVAL
0: None
INPUT STRAIN GAUGE
2: 2 mV/V
[1] WIRING CONDUIT
0: G 1/2
1: 1/2 NPT
2: M20 × 1.5
3: PG 13.5
[2] ENCLOSURE MATERIAL
A: Diecast aluminum
S: Stainless steel casting
6BLC SPECIFICATIONS
ES-8890 Rev.1 Page 1/3
http://www.m-system.co.jp/
