INTERCONNECTS
.030” dia. Pins, Straight and Right Angle
Single Row
Series 800, 801
• Receptacles accept .030”
diameter and .025” square pins
such as Series 890 and 892
pin headers.
• Pin interconnects available with
straight (MM# 7007) or right angle
(MM# 5005) solder tails. (See page
173 for details)
• Sockets are available with straight
(MM# 1304) or right angle (MM#
1305) solder tails. (See pages
146 & 147 for details)
Fig. 1
Ordering Information
Series 800...10-001
Straight Pin Header
800-XX-0_ _-10-001
Fig. 1
Fig. 2
Specify # of pins
01-64
Series 800...20-001
Right Angle Pin Header
Fig. 2
800-XX-0 _ _-20-001
Specify # of pins
01-64
XX= Plating Code
See Below
SPECIFY PLATING CODE XX=
Pin Plating
10
10µ” Au
90
200µ” Sn/Pb
Series 801...10-001
801-XX-0_ _-10-001
Specify # of pins
Straight Socket
Fig. 3
Fig. 4
Fig. 3
01-50
Series 801...20-001
Right Angle Socket
801-XX-0 _ _-20-001
Specify # of pins
01-50
XX= Plating Code
See Below
SPECIFY PLATING CODE XX=
Sleeve (Pin)
93
200µ” Sn/Pb 200µ”Sn/Pb
30µ” Au 200µ”Sn/Pb
99
Fig. 4
Contact (Clip)
www.mill-max.com
ꢀ
516-922-6000
79
