1N5221UR-1 thru 1N5281BUR-1,e3  
					(or MLL5221-1 thru MLL5281B-1,e3)  
					METALLURGICALLY BONDED GLASS  
					SURFACE MOUNT 500 mW ZENERS  
					S C O T T S D A L E D I V I S I O N  
					DESCRIPTION  
					APPEARANCE  
					The 1N5221BUR-1 thru 1N5281BUR-1 series of 0.5 watt Zener Voltage  
					Regulators provides a surface mount equivalent to the popular JEDEC  
					registered 1N5221B to 1N5281B for 2.4 to 200 volts in a metallurgically  
					bonded configuration. They are available with standard 5%, 10%, or 20%  
					tolerances as well as tighter tolerances identified by different suffix letters on  
					the part number. Microsemi also offers numerous other Zener products to  
					meet higher and lower power applications.  
					DO-213AA  
					IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com  
					FEATURES  
					APPLICATIONS / BENEFITS  
					•
					Surface mount equivalents to the JEDEC registered  
					1N5221 thru 1N5281B series  
					•
					Regulates voltage over a broad operating  
					current and temperature range  
					•
					•
					•
					Hermetically sealed surface mount package  
					Internal metallurgical bond  
					•
					•
					Selection from 2.4 to 200 V  
					Standard voltage tolerances are plus/minus 5%  
					with B suffix identification and 10 % with A suffix  
					Tight tolerances available in plus or minus 2%  
					or 1% with C or D suffix respectively  
					Options for screening in accordance with MIL-PRF-  
					19500 for JAN, JANTX, JANTXV, and JANS are  
					available by adding MQ, MX, MV, or MSP prefixes  
					respectively to part numbers  
					•
					•
					•
					•
					Nonsensitive to ESD per MIL-STD-750 Method 1020  
					Minimal capacitance (see Figure 3)  
					•
					•
					RoHS Compliant devices available by adding “e3” suffix  
					DO-7 or DO-35 glass body axial-leaded Zener  
					equivalents also available per JEDEC registration (see  
					separate data sheet for part numbers 1N5221 thru  
					1N5281B series  
					Inherently radiation hard as described in Microsemi  
					MicroNote 050  
					MAXIMUM RATINGS  
					MECHANICAL AND PACKAGING  
					•
					•
					Operating and Storage temperature: -65ºC to +175ºC  
					•
					CASE: Hermetically sealed glass DO-213AA  
					(SOD80 or MLL34) MELF style package  
					Thermal Resistance: 100ºC/W junction to end cap  
					and 250ºC/W junction to ambient when mounted on  
					FR4 PC board (1 oz Cu) with recommended footprint  
					(see last page)  
					•
					FINISH: End caps Tin-Lead or RoHS Compliant  
					annealed matte-Tin plating solderable per MIL-STD-  
					750, method 2026  
					•
					Steady-State Power: 0.5 watts at end cap  
					temperature TEC < 125oC or ambient temperature TA  
					< 50ºC when mounted on FR4 PC board as described  
					for thermal resistance above (see Figure 2 for  
					derating)  
					•
					POLARITY: Cathode indicated by band where  
					diode is to be operated with the banded end positive  
					with respect to the opposite end for Zener regulation  
					•
					•
					MARKING: cathode band only  
					TAPE & REEL option: Standard per EIA-481-B with  
					12 mm tape, 2000 per 7 inch reel or 5000 per 13  
					inch reel (add “TR” suffix to part number)  
					WEIGHT: 0.04 grams  
					•
					•
					Forward voltage @200 mA: 1.1 volts (maximum)  
					Solder Temperatures: 260 ºC for 10 seconds (max)  
					•
					•
					See package dimensions on last page  
					Copyright © 2005  
					8-29-2005 REV A  
					Microsemi  
					Page 1  
					Scottsdale Division  
					8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503