Document 159-1
Chip Inductors
–
0805HS Series (2012)
Ceramic body and wire wound construction provide highest
SRFsavailablein0805size. Theseultra-compactinductors
provide exceptional Q values, even at high frequencies.
Free evaluation samples are available by contacting
Coilcraft or ordering them on-line at www.coilcraft.com.
Inductance2
(nH)
Percent
SRF min5 DCR max6
Irms7
(mA)
Color
code
Part number1
tolerance3
Q min4
(MHz)
(Ohms)
0805HS-030T_B_
0805HS-060T_B_
0805HS-080T_B_
0805HS-120T_B_
0805HS-150T_B_
3.3 @ 250 MHz
6.8 @ 250 MHz
8.2 @ 250 MHz
12 @ 250 MHz
15 @ 250 MHz
5
5
5
5
5
50 @1500 MHz
50 @1000 MHz
50 @1000 MHz
50 @500 MHz
50 @500 MHz
7900
5500
4700
4000
3400
0.08
0.11
0.12
0.15
0.17
600
600
600
600
600
Black
Brown
Red
Orange
Yellow
0805HS-180T_B_
0805HS-220T_B_
0805HS-270T_B_
0805HS-330T_B_
0805HS-390T_B_
18 @ 250 MHz
22 @ 250 MHz
27 @ 250 MHz
33 @ 250 MHz
39 @ 250 MHz
5
50 @500 MHz
55 @500 MHz
55 @500 MHz
60 @500 MHz
60 @500 MHz
3300
2600
2500
2050
2000
0.20
0.22
0.25
0.27
0.29
600
500
500
500
500
Green
Blue
Violet
Gray
5,2
5,2
5,2
5,2
White
0805HS-470T_B_
0805HS-560T_B_
0805HS-680T_B_
0805HS-820T_B_
0805HS-101T_B_
47 @ 200 MHz
56 @ 200 MHz
68 @ 200 MHz
82 @ 150 MHz
100 @ 150 MHz
5,2
60 @500 MHz
60 @500 MHz
60 @500 MHz
65 @500 MHz
65 @500 MHz
1650
1550
1450
1300
1200
0.31
0.34
0.38
0.42
0.46
500
500
500
400
400
Black
Brown
Red
Orange
Yellow
5,2,1
5,2,1
5,2,1
5,2,1
0805HS-121T_B_
0805HS-151T_B_
0805HS-181T_B_
0805HS-221T_B_
120 @ 150 MHz
150 @ 100 MHz
180 @ 100 MHz
220 @ 100 MHz
5,2,1
5,2,1
5,2,1
5,2
50 @250 MHz
50 @250 MHz
50 @250 MHz
50 @250 MHz
1100
920
870
850
0.51
0.56
0.64
0.70
400
400
400
400
Green
Blue
Violet
Gray
1. When ordering, please specify tolerance and packaging codes:
2. Inductance measured using a Coilcraft SMD-A fixture in an Agilent/HP
4286A impedance analyzer with Coilcraft-provided correlation pieces.
3. Tolerances in bold are stocked for immediate shipment.
4. Q measured using an Agilent/HP 4291A with an Agilent/HP 16193 test
fixture.
5. SRF measured using an Agilent/HP 8720D network analyzer and a
Coilcraft SMD-D test fixture.
6. DCR measured on a Cambridge Technology micro-ohmmeter and a
Coilcraft CCF858 test fixture.
7. Average current for a 15°C rise above 25°C ambient.
8. Operating temperature range −40°C to +125°C.
9. Electrical specifications at 25°C.
0805HS-221TJBC
Tolerance: F = 1% G = 2% J = 5%
(Table shows stock tolerances in bold.)
Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic
tape (2000 parts per full reel).
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use
code letter C instead.
D = 13″ machine-ready reel. EIA-481 embossed plastic
tape (7500 parts per full reel).
See Qualification Standards section for environmental and test data.
Specifications subject to change without notice.
Please check our website for latest information.
Document 159-1 Revised 01/03/04
© Coilcraft, Inc. 2005
