INTERCONNECTS
Solderless Press-Fit
Single Row
Series 800, 801
• The unique compliant tail pins
conform to .040” .003 finished
hole without stressing inner layers.
• Pin headers are offered in two tail
lengths for .060”-.100” (MM# 5601)
and .090”-.130” (MM# 5602) thick
panels. (See page 178 for details)
• Sockets use Hi-Rel, six-finger
clips which accept .030” dia. pins
and also .025” square pins.
(MM# 4614 or 4615). (See page
147 for details)
Fig. 1
Fig. 2
Fig. 3
Ordering Information
Compliant Tail Pin Header
for .060 - .100” thick boards
Fig. 1
Fig. 2
800-XX-0 _ _-61-001000
Specify # of pins
01-64
Compliant Tail Pin Header
for .090 - .130” thick boards
800-XX-0 _ _-62-001000
Specify # of pins
01-64
For RoHS compliance, select
ꢀ
plating code.
For the gold option (XX=10) also change
part number from 800-XX-0XX-6X-001000
to 800-10-0XX-6X-001100
XX= Plating Code
See Below
2O(3
ꢀꢁꢁꢀꢂꢃꢄꢂ%#
SPECIFY PLATING CODE XX=
Pin Plating
10ꢀ
90
40ꢀ
10μ” Au
200μ” Sn/Pb 200μ” Sn
Compliant Tail Socket
for .060 - .100” thick boards
Fig. 3
Fig. 4
801-XX-0 _ _-61-001000
Specify # of pins
01-50
Compliant Tail Socket
for .090 - .130” thick boards
801-XX-0 _ _-62-001000
Specify # of pins
01-50
XX= Plating Code
See Below
2O(3
ꢀꢁꢁꢀꢂꢃꢄꢂ%#
SPECIFY PLATING CODE XX=
Sleeve (Pin)
13
ꢀ
91
93
99
41
ꢀ
43
ꢀ
44
ꢀ
10µ” Au
30µ” Au
200µ” Sn/Pb 200µ” Sn/Pb 200µ”Sn/Pb 200µ”Sn 200µ”Sn 200µ”Sn
Fig. 4
10µ” Au
30µ” Au 200µ”Sn/Pb 10µ” Au
30µ” Au 200µ”Sn
Contact (Clip)
www.mill-max.com
ꢀ
516-922-6000
83
