1N4001G thru 1N4007G
Glass Passivated Junction Rectifiers
Reverse Voltage 50 to 1000 Volts Forward Current 1.0 Ampere
Features
Plastic package has Underwriters Laboratories Flammability
Classification 94V-0
High temperature metallurgically bonded construction
Cavity-free glass passivated junction
Capable of meeting environmental standards of MIL-S-19500
1.0 Ampere operation at TA=75oC with no thermal runaway
Typical IR less than 0.1uA
High temperature soldering guaranteed:
350oC/10 seconds, 0.375" (9.5mm) lead length,
5 lbs. (2.3kg) tension
Mechanical Data
Case: JEDEC DO-204AL (DO-41) / A-405, molded plastic
over glass body
Terminals: Plated axial leads, solderable per MIL-STD-750,
Method 2026
Polarity: Color band denotes cathode end
Mounting Position: Any
Weight: DO-41 - 0.012 ounce, 0.335 gram
A-405 - 0.008 ounce, 0.235 gram
Note: Lead diameter is 0.025(0.64)/0.021(0.53) for part numbers from
1N4001SG thru 1N4007SG
Maximum Ratings and Electrical Characteristics
Ratings at 25oC ambient temperature unless otherwise specified.
1N
4001G
1N
4002G
1N
4003G
1N
4004G
1N
4005G
1N
4006G
1N
4007G
Parameter
Symbols
Units
Maximum repetitive peak reverse voltage
Maximum RMS voltage
VRRM
VRMS
VDC
50
100
70
200
140
200
400
280
400
600
420
600
800
560
800
1000
700
Volts
Volts
Volts
35
50
Maximum DC blocking voltage
100
1000
Maximum average forward rectified current
0.375" (9.5mm) lead length at TA=75oC
IF(AV)
1.0
Amp
Peak forward surge current
8.3ms single half sine-wave superimposed
on rated load (JEDEC Method)
IFSM
30.0
Amps
Maximum full load reverse current, full cycle
average 0.375" (9.5mm) lead length TA=75oC
uA
Volts
uA
IR(AV)
VF
IR
30
Maximum instantaneous forward voltage at 1.0A
1.1
Maximum DC reverse current
at rated DC blocking voltage
@TA=25oC
5.0
50
@TA=125oC
Typical reverse recovery time at
uS
pF
trr
1.0
8.0
IF=0.5A, IR=1.0A, I =0.25A
rr
Typical junction capacitance at 4.0V, 1MHz
Typical thermal resistance (NOTE 1)
CJ
RθJA
RθJL
55.0
25.0
oC/W
Operating junction temperature range
Storage temperature range
TJ
-55 to +150
-55 to +150
oC
oC
TSTG
Notes:
1. Thermal resistance from junction to ambient at 0.375" (9.5mm) lead length, P.C.B. mounted
13
