BA-5G5UD--Datasheet/数据表在线中文翻译

BA-5G5UD

●

Package Dimensions :

●

Features :

1. Emitting area : 5.0×1.7×5（mm）

2. Low power requirement.

3. Excellent characters appearance.

4. Solid state reliability.

5. Categorized for luminous intensity.

6. Universal pin out.

●

Description :

1. The BA-5G5UD is 5 bar grapharray display.

Notes:

2. This product use green chips.

3. This product have a black face and

white segments.

1. All dimensions are in millimeters(inches).

2. Tolerance is ±0.25mm(.01")unless otherwise

specified.

3. Specifications are subject to change without

notice.

4. This product doesn't contain restricted

substance, comply ROHS standard.

● Internal Circuit Diagram :

http://www.ystone.com.tw

BA-5G5UD

● Absolute Maximum Ratings(Ta=25℃)

Parameter

Symbol

Rating

Unit

Power Dissipation Per Segment

Forward Current Per Segment

Peak Forward Current Per Segment

I_F

150

I_FP

(Duty 1/10, 1KHZ)

Reverse Voltage Per Segment

Operating Temperature

Storage Temperature

V_R

-40℃~85℃

Topr

Tstg

Tsol

Soldering Temperature

(1/16" From Body)

260℃ For 5 Seconds

● Electrical And Optical Characteristics(Ta=25℃)

Parameter

Forward Voltage Per Segment

Luminous Intensity Per Segment

Reverse Current Per Segment

Peak Wave Length

Symbol Condition Min.

Typ.

2.1

5.0

Max.

Unit

I_F=10mA

V_R=5V

2.5

100

mcd

μA

I_R

λp

λd

Δλ

I_F=10mA

569

568

Dominant Wave Length

574

Spectral Line Half-width

http://www.ystone.com.tw

BA-5G5UD

● Typical Electro-Optical Characteristics Curves

(25℃ Ambient Temperature Unless Otherwise Noted)

Fig.1 Relative Radiant Intensity VS. Wavelength

1.0

0.5

460

490

520

550

580

610

640

Wavelength(nm)

Fig.3 Relative Luminous

Intensity VS.

Fig.2 Forward Current VS.

Forward Voltage

Ambient Temperature

3.0

2.5

2.0

1.5

1.0

0.5

-40 -20

Ambient Temperature Ta( C)

Forward Voltage (V)

Fig.4 Relative Luminous

Intensity VS.

Fig.5 Forward Current

Derating Curve VS.

Ambient Temperature

Forward Current

3.0

2.0

1.0

0.0

20 40 60 80 100 120

Forward Current(mA)

Ambient Temperature Ta( C)

http://www.ystone.com.tw

BA-5G5UD

● Dip Soldering

300

Max:260℃,5sec.

Suggest:2~3sec.

250

200

150

100

Fluxing

Preheat

ec.)

100

110

120

IME(s

1. Please avoid any external stress applied to the lead-frames and

epoxy while the LEDs are at high temperature, especially during soldering

2. DIP soldering and hand soldering should not be done more than one time.

3. After soldering, avoid the epoxy lens from mechanical shock or

vibration until the LEDs are back to room temperature.

4. Avoid rapid cooling during temperature ramp-down process

5. Although the soldering condition is recommended above,

soldering at the lowest possible temperature is feasible for the LEDs

● IRON Soldering

350℃ Within 3 sec., One time only.

http://www.ystone.com.tw