转到网站首页
转为中文步骤：
1、请用电脑端360浏览器打开本页地址，如您电脑未安装360浏览器，请点这里下载;
2、点击360浏览器右上角的翻译插件，如右图红圈中所示:
3、点击所弹出窗口里的右下角的按钮 “翻译当前网页”;
4、弹窗提示翻译完毕后关闭弹窗即可；
AiT Semiconductor Inc.  
1N4001F~1N4007F  
www.ait-ic.com  
RECTIFIER DIODES  
REVERSE VOLTAGE 50V TO 1000V FORWARD CURRENT 1A  
DESCRIPTION  
FEATURES  
The 1N4001F~1N4007F are available in SMAF  
package  
For surface mounted applications  
Low profile package  
Glass Passivated Chip Junction  
Easy to pick and place  
Available in SMAF package  
ORDERING INFORMATION  
MECHANICAL DATA  
Case: SMAF  
Package Type  
Part Number  
1N4001F  
Terminals: Solderable per MIL-STD-750,  
Method 2026  
1N4002F  
Approx. Weight: 27mg 0.00086oz  
1N4003F  
SMAF  
1N4004F  
1N4005F  
1N4006F  
1N4007F  
Note  
SPQ: 3,000pcs/Reel  
AiT provides all RoHS Compliant Products  
PIN DESCRIPTION  
REV1.1  
- MAR 2015 RELEASED, JUN 2016 UPDATED -  
- 1 -  
AiT Semiconductor Inc.  
1N4001F~1N4007F  
www.ait-ic.com  
RECTIFIER DIODES  
REVERSE VOLTAGE 50V TO 1000V FORWARD CURRENT 1A  
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS  
Ratings at 25°C ambient temperature unless otherwise specified. Single phase half-wave 60 Hz, resistive or  
inductive load, for capacitive load current derate by 20 %.  
Parameter  
Maximum Repetitive Peak  
Reverse Voltage  
Symbol 1N4001F1N4002F1N4003F1N4004F1N4005F1N4006F1N4007F Unit  
VRRM  
50  
100  
200  
400  
600  
800  
1000  
V
Maximum RMS Voltage  
Maximum DC Blocking Voltage  
Maximum Average Forward  
Rectified Current at TA=65°C  
Peak Forward Surge Current  
8.3ms Single Half Sine Wave  
Superimposed on Rated Load  
(JEDEC Method)  
VRMS  
VDC  
35  
50  
70  
140  
200  
280  
400  
420  
600  
560  
800  
700  
V
V
100  
1000  
IF(AV)  
IFSM  
VF  
1
A
30  
1.1  
A
Maximum Instantaneous Forward  
Voltage at 1A  
V
Maximum DC  
Reverse Current  
at Rated DC  
TA=25°C  
5
IR  
uA  
TA=125°C  
50  
Blocking Voltage  
Typical Junction CapacitanceNOTE1  
Typical Thermal ResistanceNOTE2  
Operating and Storage  
CJ  
RθJA  
TJ,  
9
pF  
115  
°C/W  
-55 ~+150  
°C  
Temperature Range  
TSTG  
NOTE1: Measured at 1MHz and applied reverse voltage of 4 V D.C.  
NOTE2: Thermal resistance from junction to ambient at 0.375" (9.5 mm) lead length, P.C.B. mounted  
REV1.1  
- MAR 2015 RELEASED, JUN 2016 UPDATED -  
- 2 -  
AiT Semiconductor Inc.  
1N4001F~1N4007F  
www.ait-ic.com  
RECTIFIER DIODES  
REVERSE VOLTAGE 50V TO 1000V FORWARD CURRENT 1A  
TYPICAL CHARACTERISTICS  
Figure. 1 Forward Current Derating Curve  
Figure. 2 Typical Instantaneous Reverse  
Characteristics  
Figure. 3 Typical Forward Characteristic  
Figure. 4 Typical Junction Capacitance  
REV1.1  
- MAR 2015 RELEASED, JUN 2016 UPDATED -  
- 3 -  
AiT Semiconductor Inc.  
1N4001F~1N4007F  
www.ait-ic.com  
RECTIFIER DIODES  
REVERSE VOLTAGE 50V TO 1000V FORWARD CURRENT 1A  
PACKAGE INFORMATION  
Dimension in SMAF (Unit: mm)  
Plastic surface mounted package; 2 leads  
The recommended mountin  
g
pad size  
UNIT  
Max  
A
C
D
E
e
g
HE  
4.9  
4.4  
193  
173  
∠
1.1  
0.9  
43  
35  
0.20  
0.12  
7.9  
3.7  
3.3  
146  
130  
2.7  
2.4  
106  
94  
1.6  
1.3  
63  
51  
1.2  
0.8  
47  
31  
mm  
Min  
Max  
Min  
7°  
mil  
4.7  
REV1.1  
- MAR 2015 RELEASED, JUN 2016 UPDATED -  
- 4 -  
AiT Semiconductor Inc.  
1N4001F~1N4007F  
www.ait-ic.com  
RECTIFIER DIODES  
REVERSE VOLTAGE 50V TO 1000V FORWARD CURRENT 1A  
IMPORTANT NOTICE  
AiT Semiconductor Inc. (AiT) reserves the right to make changes to any its product, specifications, to  
discontinue any integrated circuit product or service without notice, and advises its customers to obtain the  
latest version of relevant information to verify, before placing orders, that the information being relied on is  
current.  
AiT Semiconductor Inc.'s integrated circuit products are not designed, intended, authorized, or warranted to  
be suitable for use in life support applications, devices or systems or other critical applications. Use of AiT  
products in such applications is understood to be fully at the risk of the customer. As used herein may involve  
potential risks of death, personal injury, or servere property, or environmental damage. In order to minimize  
risks associated with the customer's applications, the customer should provide adequate design and  
operating safeguards.  
AiT Semiconductor Inc. assumes to no liability to customer product design or application support. AiT  
warrants the performance of its products of the specifications applicable at the time of sale.  
REV1.1  
- MAR 2015 RELEASED, JUN 2016 UPDATED -  
- 5 -