Simulator switch, magnetic operation 9510-...
Description
Single pole, magnetic simulator switch with extremely low trip current
and precise trip behavior. Available with threadneck mounting or
flange mounting. Actuation is via a push-pull mechanism. Push
button marking for simulation of various current ratings is optionally
available as marking insert (plug-in, exchangeable) or marking label.
Terminal designs include blade terminals, screw terminals or wire
wrap terminals. Optionally available with auxiliary contact.
US patent number: US 7,038,562 B1
Typical application
Flight Simulators
1
9510-...
9510-... with
auxiliary contact
Ordering information
Technical data
Type No.
9510 switch with magnetic instantaneous trip for flight simulators
Mounting method and style
G threadneck mounting with standard push button
Threadneck design
Voltage rating (Other
voltage ratings upon
request)
DC 24 V
DC 28 V
< 170 mA
< 25 ms
< 200 mA
< 25 ms
Trip current
Trip time
1 M12x1x6.3
2 7/16-32UNx6.3
Number of poles
Min. switching voltage
at +23 °C/+73.4 °F
at +60 °C/+140 °F
1 single pole
Accessories for threadneck
DC 22 V
DC 24 V
DC 25 V
DC 28 V
2
3
hex nut M12x1, aluminium, serrated lock washer ø12.1/ø17.2, fitted
hex nut 7/16-32UN, aluminium,
Internal resistance
approx. 153 Ω
approx. 153 Ω
serrated lock washer 11.3/14.9, fitted
Terminal configuration
J screw terminals with inch thread
Rated voltage
auxiliary circuit
DC 28 V / AC 5 V (400 Hz)
1
3
6-32UNC-2B, silver plated bent 45° inwards
6-32UNC-2B, silver plated, with socket, bent 45° inwards
Rated load,
auxiliary circuit
at DC 28 V
at DC 28 V
at AC 5 V (400 Hz)
at DC 5 V
P blade terminals
1
A6.3x0.8 DIN 46244, silver plated
0,5 A resistive
W wire wrap terminal
0,2 A lamp load
0,24 A lamp load
0,005 A minimum load
4
pin size 1.2x1.2 EN 60352-1, gold plated, with socket
Rated voltage
F0 DC 24 V
F1 DC 28 V
Typical life
without auxiliary contact:
10 000 operations at rated voltage
with auxiliary contact:
Accessories (terminal screws)
B Phillips screw 6-32UNC-2Ax4.8 fitted
(MS 51957-25)
5 000 operations at rated voltage
Temperature range
Insulation resistance
-30 °C ...60 °C (-22...+140 °F)
> 100 MΩ (DC 500 V)
Z without accessories
Accessories (terminal washers)
0
2
without accessories
3.6 split washer fitted (MS 35338-136)
Internal circuit
Dielectric strength
(leakage current < 1mA)
AC 1500 V main terminal to main
terminal, main circuit open
R2 with logic diode
AC 800 V terminal to terminal,
auxiliary circuit open
AC 1500 V main circuit to main circuit
Colour of the push button
S
A
B
black
green, for marking insert
black, for marking insert
Degree of protection
(IEC 60529)
operating area IP40
terminal area IP00
0
1
without marking
hot-stamped marking, can be
read when locating pin is
above
Vibration (sinusoidal)
x axis, y axis:
3 g (57-500 Hz), +-0.23 mm (10-57 Hz)
to DIN IEC 60068-2-6, test Fc
10 cycles/frequency axis
9
without marking insert
Auxiliary contact versions:
blank: no auxiliary
z axis:
2 g (57-500 Hz), +-0.23 mm (10-57 Hz)
to DIN IEC 60068-2-6, test Fc
10 cycles/frequency axis
contact (standard)
S1
with auxiliary contact
(female contact for male
contacts to EN 3155-016
M2018)
Shock
Humidity
Mass
5 g (11 ms),
to DIN IEC 60068-2-27, test Ea
S5
with polarized auxiliary
contact (female contact
for male contacts to EN
3155-016 M2018)
Current ratings
240 hours at 95 % RH, 40 °C
to DIN IEC 60068-2-3, test Ca
23 g without accessories
26 g with accessories
approx. 27 g with auxiliary contact,
without accessories
0.5...150 A
9510 - G 2 1 3 - J 1 F1 - B 0 R2 S 1 - S1 - 5 A ordering example
Please be informed that we have minimum ordering quantities to be
observed.
approx. 30 g with auxiliary contact,
with accessories
2010
www.e-t-a.de
1
