转到网站首页
转为中文步骤：
1、请用电脑端360浏览器打开本页地址，如您电脑未安装360浏览器，请点这里下载;
2、点击360浏览器右上角的翻译插件，如右图红圈中所示:
3、点击所弹出窗口里的右下角的按钮 “翻译当前网页”;
4、弹窗提示翻译完毕后关闭弹窗即可；
1N4001, 1N4002, 1N4003, 1N4004, 1N4005, 1N4006, 1N4007  
www.vishay.com  
Vishay General Semiconductor  
General Purpose Plastic Rectifier  
FEATURES  
• Low forward voltage drop  
• Low leakage current  
• High forward surge capability  
• Solder dip 275 °C max. 10 s, per JESD 22-B106  
DO-41 (DO-204AL)  
• Material categorization: for definitions of  
compliance please see www.vishay.com/doc?99912  
PRIMARY CHARACTERISTICS  
TYPICAL APPLICATIONS  
IF(AV)  
1.0 A  
For use in general purpose rectification of power supplies,  
inverters, converters, and freewheeling diodes application.  
50 V, 100 V, 200 V, 400 V, 600 V,  
800 V, 1000 V  
VRRM  
IFSM (8.3 ms sine-wave)  
30 A  
45 A  
MECHANICAL DATA  
IFSM (square wave tp = 1 ms)  
Case: DO-41 (DO-204AL), molded epoxy body  
Molding compound meets UL 94 V-0 flammability rating  
Base P/N-E3 - RoHS-compliant, commercial grade  
VF  
IR  
1.1 V  
5.0 μA  
Terminals: matte tin plated leads, solderable per  
J-STD-002 and JESD 22-B102  
E3 suffix meets JESD 201 class 1A whisker test  
TJ max.  
150 °C  
Package  
DO-41 (DO-204AL)  
Single  
Circuit configuration  
Polarity: color band denotes cathode end  
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)  
PARAMETER  
SYMBOL 1N4001 1N4002 1N4003 1N4004 1N4005 1N4006 1N4007 UNIT  
Maximum repetitive peak reverse voltage  
Maximum RMS voltage  
VRRM  
VRMS  
VDC  
50  
35  
50  
100  
70  
200  
140  
200  
400  
280  
400  
600  
420  
600  
800  
560  
800  
1000  
700  
V
V
V
Maximum DC blocking voltage  
100  
1000  
Maximum average forward rectified current  
0.375" (9.5 mm) lead length at TA = 75 °C  
IF(AV)  
IFSM  
1.0  
30  
A
A
Peak forward surge current 8.3 ms single half  
sine-wave superimposed on rated load  
tp = 1 ms  
45  
35  
30  
Non-repetitive peak forward  
surge current square waveform  
TA = 25 °C (fig. 3)  
tp = 2 ms  
tp = 5 ms  
IFSM  
A
Maximum full load reverse current, full cycle  
average 0.375" (9.5 mm) lead length TL = 75 °C  
IR(AV)  
I2t (1)  
30  
μA  
Rating for fusing (t < 8.3 ms)  
3.7  
A2s  
Operating junction and  
storage temperature range  
TJ, TSTG  
-50 to +150  
°C  
Note  
(1)  
For device using on bridge rectifier application  
Revision: 29-Apr-2020  
Document Number: 88503  
1
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com  
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT  
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000  
1N4001, 1N4002, 1N4003, 1N4004, 1N4005, 1N4006, 1N4007  
www.vishay.com  
Vishay General Semiconductor  
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)  
PARAMETER  
TEST CONDITIONS SYMBOL 1N4001 1N4002 1N4003 1N4004 1N4005 1N4006 1N4007 UNIT  
Maximum instantaneous  
forward voltage  
1.0 A  
VF  
1.1  
V
TA = 25 °C  
5.0  
50  
15  
Maximum DC reverse current  
at rated DC blocking voltage  
IR  
μA  
pF  
TA = 125 °C  
Typical junction capacitance  
4.0 V, 1 MHz  
CJ  
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)  
PARAMETER  
SYMBOL 1N4001 1N4002 1N4003 1N4004 1N4005 1N4006 1N4007 UNIT  
(1)  
RθJA  
RθJL  
50  
25  
Typical thermal resistance  
°C/W  
(1)  
Note  
(1)  
Thermal resistance from junction to ambient at 0.375" (9.5 mm) lead length, PCB mounted  
ORDERING INFORMATION (Example)  
PREFERRED P/N  
1N4004-E3/54  
1N4004-E3/73  
UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY  
DELIVERY MODE  
0.33  
0.33  
54  
73  
5500  
3000  
13" diameter paper tape and reel  
Ammo pack packaging  
RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted)  
1.0  
0.8  
0.6  
0.4  
0.2  
0
30  
25  
20  
15  
10  
5
60 Hz Resistive  
or Inductive Load  
TA = 55 °C  
8.3 ms Single Half Sine-Wave  
0.2" x 0.2"  
(5.0 mm x 5.0 mm)  
Copper Pads  
0.375" (9.5 mm) Lead Length  
0
25  
50  
75  
100  
125  
150  
175  
1
10  
100  
Ambient Temperature (°C)  
Number of Cycles at 60 Hz  
Fig. 1 - Forward Current Derating Curve  
Fig. 2 - Maximum Non-repetitive Peak Forward Surge Current  
Revision: 29-Apr-2020  
Document Number: 88503  
2
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com  
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT  
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000  
1N4001, 1N4002, 1N4003, 1N4004, 1N4005, 1N4006, 1N4007  
www.vishay.com  
Vishay General Semiconductor  
50  
45  
40  
35  
30  
25  
20  
15  
10  
100  
TJ = 25 °C  
f = 1.0 MHz  
Vsig = 50 mVp-p  
tp = 1 ms  
tp = 2 ms  
10  
tp = 5 ms  
tp  
Square Waveform  
1
25  
50  
75  
100  
125  
0.1  
1
10  
100  
Ambient Temperature (°C)  
Reverse Voltage (V)  
Fig. 3 - Non-Repetitive Peak Forward Surge Current  
Fig. 6 - Typical Junction Capacitance  
100  
100  
10  
TJ = 25 °C  
Pulse Width = 300 μs  
1 % Duty Cycle  
10  
1
1
0.1  
0.01  
0.1  
0.01  
0.1  
1
10  
100  
0.6  
0.8  
1.0  
1.2  
1.4  
1.6  
1.8  
Instantaneous Forward Voltage (V)  
t - Pulse Duration (s)  
Fig. 4 - Typical Instantaneous Forward Characteristics  
Fig. 7 - Typical Transient Thermal Impedance  
1000  
TJ = 150 °C  
100  
10  
TJ = 100 °C  
1
TJ = 25 °C  
0.1  
0.01  
0
20  
40  
60  
80  
100  
Percentage of Peak Reverse Voltage (%)  
Fig. 5 - Typical Reverse Characteristics  
Revision: 29-Apr-2020  
Document Number: 88503  
3
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com  
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT  
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000  
1N4001, 1N4002, 1N4003, 1N4004, 1N4005, 1N4006, 1N4007  
www.vishay.com  
Vishay General Semiconductor  
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)  
DO-41 (DO-204AL)  
1.0 (25.4)  
MIN.  
0.107 (2.7)  
0.080 (2.0)  
DIA.  
0.205 (5.2)  
0.160 (4.1)  
1.0 (25.4)  
MIN.  
0.034 (0.86)  
0.028 (0.71)  
DIA.  
Note  
• Lead diameter is  
0.026 (0.66)  
0.023 (0.58)  
for suffix “E” part numbers  
Revision: 29-Apr-2020  
Document Number: 88503  
4
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com  
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT  
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000  
Legal Disclaimer Notice  
www.vishay.com  
Vishay  
Disclaimer  
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE  
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.  
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,  
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other  
disclosure relating to any product.  
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or  
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all  
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,  
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular  
purpose, non-infringement and merchantability.  
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical  
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements  
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product  
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in  
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating  
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.  
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited  
to the warranty expressed therein.  
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and  
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of  
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.  
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website  
or for that of subsequent links.  
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining  
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.  
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please  
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.  
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by  
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.  
© 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED  
Revision: 01-Jan-2022  
Document Number: 91000  
1