1N4001GPE-M3/54--Datasheet/数据表在线中文翻译

1N400xGP-M3, 1N400xGPHM3

www.vishay.com

Vishay General Semiconductor

Glass Passivated Junction Plastic Rectifier

FEATURES

• Superectifier structure for high reliability

application

SUPERECTIFIER^®

• Cavity-free glass-passivated junction

• Low forward voltage drop

• Low leakage current, typical I_Rless than 0.1 μA

• High forward surge capability

• Solder dip 275 °C max. 10 s, per JESD 22-B106

• AEC-Q101 qualified

DO-204AL (DO-41)

• Material categorization: For definitions of compliance

please see www.vishay.com/doc?99912

PRIMARY CHARACTERISTICS

MECHANICAL DATA

Package

DO-204AL (DO-41)

Case: DO-204AL (DO-41), molded epoxy over glass bodyꢀ

Molding compound meets UL 94 V-0 flammability rating

I_F(AV)

1.0 A

50 V to 1000 V

30 A

V_RRM

Base P/N-M3

commercial gradeꢀ

Base P/NHM3

AEC-Q101 qualified

halogen-free, RoHS-compliant, and

_FSM(8.3 ms sine-wave)

_FSM(square wave t_p= 1 ms)

45 A

halogen-free, RoHS-compliant, and

I_R

V_F

5.0 μA

1.1 V

Terminals: Matte tin plated leads, solderable per

J-STD-002 and JESD 22-B102ꢀ

M3 suffix meets JESD 201 class 1A whisker test, HM3 suffix

T_Jmax.

175 °C

Diode variations

Single die

meets JESD 201 class 2 whisker test

Polarity: Color band denotes cathode end

TYPICAL APPLICATIONS

Note

For use in general purpose rectification of power supplies,

inverters, converters and freewheeling diodes for both

consumer, and automotive applications.

•

For part numbers with “E” suffix, they are”-M3” commercial

grade only

MAXIMUM RATINGS (T_A= 25 °C unless otherwise noted)

PARAMETER

SYMBOL 1N4001GP 1N4002GP 1N4003GP 1N4004GP 1N4005GP 1N4006GP 1N4007GP UNIT

Maximum repetitive peakꢀ

reverse voltage

V_RRM

100

200

400

600

800

1000

(1)

Maximum RMS voltage

V_RMS

V_DC

140

200

280

400

420

600

560

800

700

(1)

Maximum DC blocking voltage

Maximum average forward rectifiedꢀ

100

1000

current 0.375" (9.5 mm) lead lengthꢀ I_F(AV)

1.0

at T_A= 75 °C

Peak forward surge current 8.3 ms

single half sine-wave

superimposed on rated load

(1)

I_FSM

I_R(AV)

t_p= 1 ms

Non-repetitive peakꢀ

forward surge currentꢀ

square waveformꢀ

T_A= 25 °C (fig. 3)

(1)

t_p= 2 ms

t_p= 5 ms

Maximum full load reverse current,ꢀ

full cycle average 0.375" (9.5 mm)ꢀ

lead length T_A= 75 °C

μA

Rating for fusing (t < 8.3 ms)

I²t ⁽²⁾

3.7

A²s

°C

Operating junction andꢀ

storage temperature range

(1)

T_J, T_STG

- 65 to + 175

Notes

(1)

JEDEC^®registered values

For device using on bridge rectifier application

(2)

Revision: 04-Dec-13

Document Number: 87902

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

1N400xGP-M3, 1N400xGPHM3

www.vishay.com

Vishay General Semiconductor

ELECTRICAL CHARACTERISTICS (T_A= 25 °C unless otherwise noted)

TEST

CONDITIONS

PARAMETER

SYMBOL 1N4001GP 1N4002GP 1N4003GP 1N4004GP 1N4005GP 1N4006GP 1N4007GP UNIT

Maximum

instantaneous

forward voltage

1.0 A

V_F

1.1

Maximum DC

reverse currentꢀ

at rated DC

T_A= 25 °C

5.0

(1)

I_R

μA

T_A= 125 °C

blocking voltage

I_F= 0.5 A,ꢀ

Typical reverse

recovery time

_R= 1.0 A,ꢀ

t_rr

2.0

8.0

μs

_rr= 0.25 A

Typical junction

capacitance

4.0 V,ꢀ

1 MHz

C_J

Note

(1)

JEDEC^®registered values

THERMAL CHARACTERISTICS (T_A= 25 °C unless otherwise noted)

PARAMETER

SYMBOL 1N4001GP 1N4002GP 1N4003GP 1N4004GP 1N4005GP 1N4006GP 1N4007GP UNIT

(1)

R_TJA

R_TJL

Typical thermal resistance

°C/W

(1)

Note

(1)

Thermal resistance from junction to ambient at 0.375" (9.5 mm) lead length, PCB mounted

ORDERING INFORMATION (Example)

PREFERRED P/N

1N4004GP-M3/54

1N4004GP-M3/73

1N4004GPHM3/54 ⁽¹⁾

1N4004GPHM3/73 ⁽¹⁾

UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY

DELIVERY MODE

0.335

5500

3000

5500

3000

13" diameter paper tape and reel

Ammo pack packaging

13" diameter paper tape and reel

Ammo pack packaging

Note

(1)

AEC-Q101 qualifiedꢀ

RATINGS AND CHARACTERISTICS CURVES (T_A= 25 °C unless otherwise noted)

1.0

0.8

0.6

0.4

0.2

T_J= T_JMax.

8.3 ms Single Half Sine-Wave

60 Hz

Resistive or Inductive Load

0.375" (9.5 mm) Lead Length

100

125

150

175

100

Ambient Temperature (°C)

Number of Cycles at 60 Hz

Fig. 1 - Forward Current Derating Curve

Fig. 2 - Maximum Non-repetitive Peak Forward Surge Current

Revision: 04-Dec-13

Document Number: 87902

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

1N400xGP-M3, 1N400xGPHM3

www.vishay.com

Vishay General Semiconductor

100

T_J= 25 °C

f = 1.0 MHz

V_sig= 50 mV_p-p

t_p= 1 ms

t_p= 2 ms

t_p= 5 ms

t_p

Square Waveform

0.1

100

125

100

Ambient Temperature (°C)

Reverse Voltage (V)

Fig. 3 - Non-Repetitive Peak Forward Surge Current

Fig. 6 - Typical Junction Capacitance

100

T_J= 25 °C

Pulse Width = 300 μs

1 % Duty Cycle

0.1

0.01

0.1

0.6

0.8

1.0

1.2

1.4

1.6

0.01

0.1

100

Instantaneous Forward Voltage (V)

t - Pulse Duration (s)

Fig. 4 - Typical Instantaneous Forward Characteristics

Fig. 7 - Typical Transient Thermal Impedance

T_J= 100 °C

0.1

T_J= 25 °C

0.01

100

Percent of Rated Peak Reverse Voltage (%)

Fig. 5 - Typical Reverse Characteristics

Revision: 04-Dec-13

Document Number: 87902

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

1N400xGP-M3, 1N400xGPHM3

www.vishay.com

Vishay General Semiconductor

PACKAGE OUTLINE DIMENSIONS in inches (millimeters)

DO-204AL (DO-41)

1.0 (25.4)

MIN.

0.107 (2.7)

0.080 (2.0)

DIA.

0.205 (5.2)

0.160 (4.1)

1.0 (25.4)

MIN.

0.034 (0.86)

0.028 (0.71)

DIA.

Note

• Lead diameter is

0.026 (0.66)

0.023 (0.58)

for sufﬁx “E” part numbers

Revision: 04-Dec-13

Document Number: 87902

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Legal Disclaimer Notice

www.vishay.com

Vishay

Disclaimer

ꢀ

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of

typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding

statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a

particular product with the properties described in the product specification is suitable for use in a particular application.

Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over

time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.

Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for

such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document

or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Revision: 08-Feb-17

Document Number: 91000