defining a degree of excellence
10BASE-TNETWORKCOMPONENTS
960050A
APPLICATION CIRCUIT
APPLICATION NOTES
• Bel's surface mount 10Base-T network component filter modules provide the complete solution as the interface
module between the IC transceiver chip and the media side connector. Designed within each module are transmit and
receive filter networks, high voltage isolation transformers and high performance EMI suppression common mode
chokes. Each module fully meets the IEEE 802.3 standards to 10 Mbps data rates over 100 meters of media cable.
• All of these part types have been designed to provide signal performance optimization, maximum noise reduction and
minimum crosstalk interference. Careful board layout and grounding techniques are also critical to control jitter and
signal reflections.
• Bel's low profile, surface mount packaging is ideal for high speed pick and place machinery. Parts can be shipped on
tape and reel for high speed placement. Construction processes have been implemented for thermal compatibility
with high temperature IR reflow assembly processing. Post dipping of leads assist with PC board solderability. Each
part is optically inspected to meet rigid coplanarity requirements.
Corporate Office
Bel Fuse Inc.
198 Van Vorst Street, Jersey City, NJ 07302-4496
Tel: 201-432-0463
Fax: 201-432-9542
E-Mail: BelFuse@belfuse.com
Internet: http://www.belfuse.com
Far East Office
Bel Fuse Ltd.
8F/8 Luk Hop Street
European Office
Bel Fuse Europe Ltd.
Preston Technology Management Centre
Marsh Lane, Preston PR1 8UD
Lancashire, U.K.
Tel: 44-1772-556601
Fax: 44-1772-888366
San Po Kong
Kowloon, Hong Kong
Tel: 852-2328-5515
Fax: 852-2352-3706
