转到网站首页
转为中文步骤:
1、请用电脑端360浏览器打开本页地址,如您电脑未安装360浏览器,请点这里下载;
2、点击360浏览器右上角的翻译插件,如右图红圈中所示:
3、点击所弹出窗口里的右下角的按钮 “翻译当前网页”;
4、弹窗提示翻译完毕后关闭弹窗即可;
HA13165H  
Multiple Voltage Regulator for Car Audio  
REJ03F0223-0100  
Rev.1.00  
Jan 16, 2007  
Description  
The HA13165H is a compact multiple voltage regulator for car audio system. This IC has seven output system, these  
are 5.7 V output for a microcontroller, 7 V output for CD driver, 8.5 V output for audio control, 10 V output for  
illuminations, 5.0 V output for independent from microcontroller line, and high side switch for remote-ANT and  
remote-external AMP.  
Functions  
General  
ACC power monitor circuit is built-in as to detect low voltage.  
Low saturation output (PNP output) used for audio output.  
Adjustable voltage for illumination output by changing an external resistor.  
Protections  
Output current limit circuit to avoid device destruction caused by shorted output, etc.  
High surge input protector against VCC and ACC.  
Built in a thermal shutdown circuit to prevent against the thermal destruction.  
Rev.1.00 Jan 16, 2007 page 1 of 9  
HA13165H  
Pin Description and Equivalent Circuit  
Function  
Pin  
Surge  
Input  
No.  
1
Pin Name  
Specification  
Equivalent Circuit  
Normal Operation  
TSD  
24 V  
NC  
2
ANT OUT  
VCC-1 V/500 mA min  
Output voltage is  
VCC-1 V when M or  
H level to CTRL pin  
and H level to ANT-  
CTRL.  
0 V  
0 V  
0 V  
Vcc  
Vcc  
90 k  
10 kΩ  
3
4
ACC IN  
Connected to ACC.  
45 k  
15 kΩ  
VDD OUT  
5.7 V/100 mA min  
Regular 5.7 V.  
5.7 V  
5.7 V  
0 V  
Vcc  
Vcc  
175 k  
50 kΩ  
5
6
SW5V OUT 5.0 V/100 mA min  
COMP OUT 5.0 V/100 mA min  
Output voltage is 5  
V when M or H level  
applied to CTRL pin.  
0 V  
0 V  
0 V  
0 V  
0 V  
VDD  
Vcc  
Output for ACC  
detector  
5 V  
(ACC Hi)  
50 k  
7
8
ANT CTRL  
L: ANT output OFF  
H: ANT output ON  
51 k  
49 kΩ  
VCC  
Connected to VCC  
Rev.1.00 Jan 16, 2007 page 2 of 9  
HA13165H  
Pin Description and Equivalent Circuit (cont.)  
Function  
TSD  
Pin  
Surge  
Input  
No.  
Pin Name  
Specification  
Equivalent Circuit  
Normal Operation  
24 V  
9
BATT DET  
Low battery detect.  
Detect Detect  
Not  
VDD  
detect  
250 k  
10 kΩ  
10  
AUDIO OUT 8.5 V/500 mA min  
Output voltage is 8.5  
V when M or H level  
applied to CTRL pin.  
0 V  
0 V  
0 V  
Vcc  
Vcc  
77.3 kΩ  
12.3 kΩ  
11  
12  
CTRL  
L: BIAS OFF  
M: BIAS ON  
H: CD ON  
65 k  
35 kΩ  
CD OUT  
7.0 V/1.3 A min  
Output voltage is 7 V  
when H level applied  
to CTRL pin.  
0 V  
0 V  
0 V  
Vcc  
Vcc  
64.7 kΩ  
12.4 kΩ  
13  
14  
ILM AJ  
Adjustment pin for  
ILM output voltage.  
Vcc  
Vcc  
ILM OUT  
10.0 V/500 mA min  
Output voltage is 10  
V when M or H level  
applied to CTRL pin  
0 V  
0 V  
0 V  
33.4 kΩ  
5 kΩ  
15  
GND  
Connected to GND  
Rev.1.00 Jan 16, 2007 page 3 of 9  
HA13165H  
Timing Chart  
VCC  
8.5 V  
9.25 V  
VDD  
OUT  
CTRL  
ANT  
CTRL  
AUDIO  
OUT  
CD  
OUT  
ILM  
OUT  
SW5V  
OUT  
ANT  
OUT  
2.8 V  
ACC  
IN  
2.5 V  
COMP  
OUT  
B.DET current  
Rev.1.00 Jan 16, 2007 page 4 of 9  
HA13165H  
Block Diagram  
+B  
ACC  
VCC  
ACC IN  
8
3
+
BATT.DET  
9
Surge protector  
ANT OUT  
2
1
0.1 µF  
+
COMP OUT  
VDD OUT  
BIAS  
TSD  
6
4
+
ANT CTRL  
7
CTRL  
11  
0.1 µF  
+
CD OUT  
12  
10  
SW5V OUT  
ILM OUT  
0.1 µF  
5
+
+
AUDIO OUT  
14  
+
10 µF  
0.1 µF  
15  
TAB  
13  
ILM AJ  
GND  
GND  
Rev.1.00 Jan 16, 2007 page 5 of 9  
HA13165H  
Absolute Maximum Ratings  
(Ta = 25°C)  
Item  
Symbol  
Rating  
Unit  
V
Note  
Operating power supply voltage  
DC supply voltage  
Vcc  
Vcc(DC)  
18  
24  
V
1
2
3
Peak voltage  
Vcc(PEAK)  
50  
V
Power dissipation  
Pd  
36  
W
°C  
°C  
°C  
Junction temperature  
Operating temperature  
Storage temperature  
Tj  
150  
Topr  
Tstg  
–40 to +85  
–55 to +125  
Notes: Recommended power supply voltage range 10 to 16 V.  
1. Applied time is less than 60 s.  
2. Surge pulse as input.  
3. Ta = 25°C. : Permissible power dissipation when using a heat sink of infinite area. Refer to the derating  
curves below.  
20  
15  
thin = 1.6 mm, 100 cmAluminum heat sink  
11.0 W  
thin = 1.6 mm, 50 cmAluminum heat sink  
10  
8.7 W  
5
w/o heat sink  
1.8 W  
0
0
25  
50  
75  
100  
125  
150  
175  
Ambient temperature Ta (°C)  
Rev.1.00 Jan 16, 2007 page 6 of 9  
HA13165H  
Electrical Characteristics  
(unless otherwise noted, Vcc = 13.2 V, Ta = 25°C)  
Item  
Symbol  
IST  
Min  
Typ  
460  
Max  
700  
1.0  
3.0  
Unit  
µA  
V
Test Condition  
Standby current  
ACC = 0 V, CTRL = 0 V  
CTRL L level (STBY mode)  
CTRL M level (CD OFF mode)  
CTRL H level (CD ON mode)  
ANT CTRL L level (ANT OFF mode)  
ANT CTRL H level (ANT ON mode)  
VCL  
0
VCM  
2.0  
4.0  
0
V
VCH  
V
VACL  
VACH  
Vo1  
2.0  
V
3.0  
5.45  
V
VDD  
OUT  
Output voltage  
Voltage regulation  
Load regulation  
5.7  
10  
50  
1.0  
5.95  
50  
V
Io1 = 80 mA  
Vo11  
Vo12  
Vo13  
mV  
mV  
V
Vcc = 10 to 16 V, Io1 = 80 mA  
Io1 = 0 to 80 mA  
Io1 = 80 mA  
100  
1.5  
Minimum I/O voltage  
differential  
Output current capacity  
Ripple rejection ratio  
Output voltage  
Io1  
100  
50  
6.7  
250  
60  
mA  
dB  
V
Vo1 5.45 V  
SVR1  
Vo2  
f = 100 Hz, Io1 = 80 mA  
Io2 = 1.0 A  
CD  
OUT  
7.0  
40  
7.3  
100  
150  
1.5  
Voltage regulation  
Load regulation  
Vo21  
Vo22  
Vo23  
mV  
mV  
V
Vcc = 10 to 16V, Io2 = 1.0 A  
Io2 = 10m to 1.0 A  
Io2 = 1.0 A  
70  
Minimum I/O voltage  
differential  
1.0  
Output current capacity  
Ripple rejection ratio  
Io2  
1.3  
45  
8.0  
2.0  
50  
A
dB  
V
Vo2 6.7 V  
SVR2  
Vo3  
f = 100 Hz, Io2 = 1.0 A  
Io3 = 400 mA  
AUDIO Output voltage  
8.5  
30  
9.0  
90  
OUT  
Voltage regulation  
Load regulation  
Vo31  
Vo32  
Vo33  
mV  
mV  
V
Vcc = 10 to 16 V, Io3 = 400 mA  
Io3 = 10 to 400 mA  
Io3 = 400 mA  
100  
0.4  
200  
0.9  
Minimum I/O voltage  
differential  
Output current capacity  
Ripple rejection ratio  
Output voltage  
Io3  
500  
40  
850  
50  
mA  
dB  
V
Vo3 8.0 V  
SVR3  
Vo4  
f = 100 Hz, Io3 = 400 mA  
Io4 = 400 mA  
ILM  
OUT  
9.35  
9.85  
40  
10.35  
100  
100  
1.5  
Voltage regulation  
Load regulation  
Vo41  
Vo42  
Vo43  
mV  
mV  
V
Vcc = 12.5 to 16 V, Io4 = 400 mA  
Io4 = 10 to 400 mA  
Io4 = 400 mA  
50  
Minimum I/O voltage  
differential  
1.0  
Output current capacity  
Ripple rejection ratio  
Differential I/O voltage  
Load regulation  
Io4  
500  
32  
900  
40  
mA  
dB  
V
Vo4 9.35 V  
SVR4  
Vo51  
Vo52  
Io5  
f = 100 Hz, Io4 = 400 mA  
Io5 = 500 mA  
ANT  
OUT  
1.0  
350  
900  
5.0  
300  
5.0  
300  
2.8  
0.3  
8.6  
0.75  
1.5  
600  
mV  
mA  
V
Io5 = 10 to 500 mA  
Vo5 11.7 V  
Output current capacity  
Output voltage  
500  
4.6  
100  
4.6  
100  
2.6  
0.2  
8.3  
0.55  
200  
SW5V  
OUT  
Vo6  
5.4  
Io6 = 80 mA, VDD = no load  
Vo6 4.6 V  
Output current capacity  
Output voltage  
Io6  
mA  
V
ACC  
OUT  
Vo7  
5.4  
Io7 = 40 mA, VDD = no load  
Vo7 4.6 V  
Output current capacity  
Rise threshold voltage  
Hysteresis range  
Io7  
mA  
V
VTHH7  
VTH7  
VTHH8  
VTH8  
Io8  
3.0  
0.4  
8.9  
0.95  
V
BATT.  
DET  
Threshold voltage  
V
Hysteresis range  
V
Output current capacity  
µA  
Vo = 0.3 V  
Rev.1.00 Jan 16, 2007 page 7 of 9  
HA13165H  
Evaluation Circuit  
HA13165H  
ANT ACC VDD SW5V COMP ANT  
IN  
BATT AUDIO  
CD  
OUT OUT OUT CTRL VCC DET OUT CTRL OUT  
ILM  
AJ  
ILM  
OUT GND  
NC  
1
OUT  
2
3
4
5
6
7
8
9
10 11 12  
13  
14  
15  
C2  
C3  
C8  
C9  
C10  
0.1  
µF  
+
0.1  
µF  
0.1  
µF  
10  
µF  
0.1  
µF  
ANT  
VDD  
SW5V COMP  
BATT.DET AUDIO  
CD  
ILM  
SW1  
SW4  
SW2 SW3  
R2  
3.3 kΩ  
C6 C7  
+
R3  
3.3 kΩ  
100  
µF  
0.1  
µF  
ACC  
ANT CTRL VCC  
CTRL  
5V  
Rev.1.00 Jan 16, 2007 page 8 of 9  
HA13165H  
Package Dimensions  
JEITA Package Code  
RENESAS Code  
Previous Code  
SP-15TGV  
MASS[Typ.]  
3.0g  
P-HSIP15-14.3x19.66-1.27  
PRSS0015DA-C  
Unit : mm  
20.5 MAX  
19.66  
0.3  
19.0  
3.3MiN  
3.5 TYP 3.8MAX  
0.2  
0.2  
φ 3.6  
2-C3.0  
1.1MiN 1.28 TYP 1.50MAX  
+0.10  
-0.05  
*1  
0.25  
0.25  
0.1  
0.25  
1.11  
0.6  
1.27  
*1  
0.25  
0.25  
2.54  
1.8  
3.5  
*1  
0.5  
*1  
0.5  
6.04  
Note) 1. Dimension "*1" is the value after bending.  
( Ni/Pd/Au plating )  
Rev.1.00 Jan 16, 2007 page 9 of 9  
Sales Strategic Planning Div. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan  
Notes:  
1. This document is provided for reference purposes only so that Renesas customers may select the appropriate Renesas products for their use. Renesas neither makes  
warranties or representations with respect to the accuracy or completeness of the information contained in this document nor grants any license to any intellectual property  
rights or any other rights of Renesas or any third party with respect to the information in this document.  
2. Renesas shall have no liability for damages or infringement of any intellectual property or other rights arising out of the use of any information in this document, including,  
but not limited to, product data, diagrams, charts, programs, algorithms, and application circuit examples.  
3. You should not use the products or the technology described in this document for the purpose of military applications such as the development of weapons of mass  
destruction or for the purpose of any other military use. When exporting the products or technology described herein, you should follow the applicable export control laws  
and regulations, and procedures required by such laws and regulations.  
4. All information included in this document such as product data, diagrams, charts, programs, algorithms, and application circuit examples, is current as of the date this  
document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas products listed in this document,  
please confirm the latest product information with a Renesas sales office. Also, please pay regular and careful attention to additional and different information to be  
disclosed by Renesas such as that disclosed through our website. (http://www.renesas.com )  
5. Renesas has used reasonable care in compiling the information included in this document, but Renesas assumes no liability whatsoever for any damages incurred as a  
result of errors or omissions in the information included in this document.  
6. When using or otherwise relying on the information in this document, you should evaluate the information in light of the total system before deciding about the applicability  
of such information to the intended application. Renesas makes no representations, warranties or guaranties regarding the suitability of its products for any particular  
application and specifically disclaims any liability arising out of the application and use of the information in this document or Renesas products.  
7. With the exception of products specified by Renesas as suitable for automobile applications, Renesas products are not designed, manufactured or tested for applications  
or otherwise in systems the failure or malfunction of which may cause a direct threat to human life or create a risk of human injury or which require especially high quality  
and reliability such as safety systems, or equipment or systems for transportation and traffic, healthcare, combustion control, aerospace and aeronautics, nuclear power, or  
undersea communication transmission. If you are considering the use of our products for such purposes, please contact a Renesas sales office beforehand. Renesas shall  
have no liability for damages arising out of the uses set forth above.  
8. Notwithstanding the preceding paragraph, you should not use Renesas products for the purposes listed below:  
(1) artificial life support devices or systems  
(2) surgical implantations  
(3) healthcare intervention (e.g., excision, administration of medication, etc.)  
(4) any other purposes that pose a direct threat to human life  
Renesas shall have no liability for damages arising out of the uses set forth in the above and purchasers who elect to use Renesas products in any of the foregoing  
applications shall indemnify and hold harmless Renesas Technology Corp., its affiliated companies and their officers, directors, and employees against any and all  
damages arising out of such applications.  
9. You should use the products described herein within the range specified by Renesas, especially with respect to the maximum rating, operating supply voltage range,  
movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas shall have no liability for malfunctions or damages  
arising out of the use of Renesas products beyond such specified ranges.  
10. Although Renesas endeavors to improve the quality and reliability of its products, IC products have specific characteristics such as the occurrence of failure at a certain  
rate and malfunctions under certain use conditions. Please be sure to implement safety measures to guard against the possibility of physical injury, and injury or damage  
caused by fire in the event of the failure of a Renesas product, such as safety design for hardware and software including but not limited to redundancy, fire control and  
malfunction prevention, appropriate treatment for aging degradation or any other applicable measures. Among others, since the evaluation of microcomputer software  
alone is very difficult, please evaluate the safety of the final products or system manufactured by you.  
11. In case Renesas products listed in this document are detached from the products to which the Renesas products are attached or affixed, the risk of accident such as  
swallowing by infants and small children is very high. You should implement safety measures so that Renesas products may not be easily detached from your products.  
Renesas shall have no liability for damages arising out of such detachment.  
12. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written approval from Renesas.  
13. Please contact a Renesas sales office if you have any questions regarding the information contained in this document, Renesas semiconductor products, or if you have  
any other inquiries.  
RENESAS SALES OFFICES  
http://www.renesas.com  
Refer to "http://www.renesas.com/en/network" for the latest and detailed information.  
Renesas Technology America, Inc.  
450 Holger Way, San Jose, CA 95134-1368, U.S.A  
Tel: <1> (408) 382-7500, Fax: <1> (408) 382-7501  
Renesas Technology Europe Limited  
Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K.  
Tel: <44> (1628) 585-100, Fax: <44> (1628) 585-900  
Renesas Technology (Shanghai) Co., Ltd.  
Unit 204, 205, AZIACenter, No.1233 Lujiazui Ring Rd, Pudong District, Shanghai, China 200120  
Tel: <86> (21) 5877-1818, Fax: <86> (21) 6887-7898  
Renesas Technology Hong Kong Ltd.  
7th Floor, North Tower, World Finance Centre, Harbour City, 1 Canton Road, Tsimshatsui, Kowloon, Hong Kong  
Tel: <852> 2265-6688, Fax: <852> 2730-6071  
Renesas Technology Taiwan Co., Ltd.  
10th Floor, No.99, Fushing North Road, Taipei, Taiwan  
Tel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999  
Renesas Technology Singapore Pte. Ltd.  
1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632  
Tel: <65> 6213-0200, Fax: <65> 6278-8001  
Renesas Technology Korea Co., Ltd.  
Kukje Center Bldg. 18th Fl., 191, 2-ka, Hangang-ro, Yongsan-ku, Seoul 140-702, Korea  
Tel: <82> (2) 796-3115, Fax: <82> (2) 796-2145  
Renesas Technology Malaysia Sdn. Bhd  
Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No.18, Jalan Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia  
Tel: <603> 7955-9390, Fax: <603> 7955-9510  
© 2007. Renesas Technology Corp., All rights reserved. Printed in Japan.  
Colophon .7.0