1N4001G THRU 1N4007G, BY133G
GLASS PASSIVATED JUNCTION RECTIFIER
Reverse Voltage -
50 to 1300 Volts
Forward Current -
1.0 Ampere
Features
Plastic package has Underwriters Laboratory Flammability
Classification 94V-0
High temperature metallurgically bonded construction
Glass passivated cavity-free junction
Capable of meeting environmental standards of
MIL-S-19500
1.0 ampere operation at TA=75 with no thermal runaway
Typical IR less than 0.1
A
High temperature soldering guaranteed:
350 /10 seconds, 0.375 (9.5mm) lead length,
5 lbs. (2.3Kg) tension
Mechanical Data
DIMENSIONS
Case: DO-41 molded plastic over glass body
Terminals: Plated axial leads, solderable per
MIL-STD-750, method 2026
Polarity: Color band denotes cathode end
Mounting Position: Any
inches
mm
DIM
Note
Max.
Min.
Max.
0.205
0.106
0.034
-
Min.
4.2
A
B
C
D
0.165
0.079
0.028
1.000
5.2
2.7
0.86
-
2.0
0.71
25.40
Weight: 0.012 ounce, 0.335 gram
Maximum Ratings and Electrical Characteristics
Ratings at 25 ambient temperature unless otherwise specified.
1N
1N
1N
1N
1N
1N
1N
BY
Symbols
Units
4001G 4002G 4003G 4004G 4005G 4006G 4007G 133G
Maximum repetitive peak reverse voltage
Maximum RMS voltage
VRRM
VRMS
VDC
50
35
50
100
70
200
140
200
400
280
400
600
420
600
800
560
800
1000
700
1300
910
Volts
Volts
Volts
Maximum DC blocking voltage
100
1000
1300
Maximum average forward rectified current
0.375" (9.5mm) lead length at TA=75
I(AV)
1.0
Amp
Peak forward surge current
8.3mS single half sine-wave superimposed
on rated load (MIL-STD-750D 4066 method)
IFSM
30.0
1.1
Amps
Maximum instantaneous forward voltage at 1.0A
VF
IR
Volts
A
Maximum DC reverse current
at rated DC blocking voltage
T =25
5.0
50.0
TAA=125
Typical reverse recovery time (Note 1)
Typical junction capacitance (Note 2)
Trr
CJ
2.0
8.0
S
F
R
R
55.0
25.0
JA
Typical thermal resistance (Note 3)
/W
JL
Operating junction and storage temperature range
TJ, TSTG
-65 to +175
Notes:
(1) Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr=0.25A
(2) Measured at 1.0MHz and applied reverse voltage of 4.0 volts
(3) Thermal resistance from junction to ambient at 0.375 (9.5mm) lead length, P.C.B. mounted
1
