SAW Bandpass Filter 205606B - Preliminary
3. Specifications
Fo = 110.592 MHz
Terminating source impedance : 50Ω and matching network
Terminating load impedance
: 50Ω and matching network
Operating temperature range : - 10 to + 60 ℃
Minimum
Typical
110.592
9.0
Maximum
Center Frequency
MHz
dB
-
-
-
11.0
-
Insertion Loss
3dB Bandwidth
MHz
MHz
dB
1.0
-
1.45
3.46
0.2
35dB Bandwidth
4.0
0.8
200
-
Amplitude Ripple (Fo +/-0.3 MHz)
Group Delay Variation (Fo +/- 0.3 MHz)
Absolute Delay
-
nsec
usec
dB
-
100
-
0.8
Ultimate Rejection
35
-
38
-
Temperature Coefficient of Frequency
ppm/°C
-15
-
Notes :
1) All specifications are based on the matching schematic shown below
2) All specifications are measured by Agilent Network analyzer and full 2-port calibration
3) Electrical margin has been built into the design to account for the variations due to temperature drift and
manufacturing tolerances
4) All attenuation measurements are measured relative to insertion loss
I T F Co., Ltd.
Part No.
Rev. Date
Rev.
205606B
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
2004-02-26
2/5
DS4022-CS01