转到网站首页
转为中文步骤:
1、请用电脑端360浏览器打开本页地址,如您电脑未安装360浏览器,请点这里下载;
2、点击360浏览器右上角的翻译插件,如右图红圈中所示:
3、点击所弹出窗口里的右下角的按钮 “翻译当前网页”;
4、弹窗提示翻译完毕后关闭弹窗即可;
-10/-20  
3280  
CLAMP ON HiTESTER  
Field measuring instruments  
Dual Action  
Jaw  
Actual-size  
Slim body design  
Easy clamping  
in narrow locations  
Safe & Easy Operation!  
Features  
3282  
3280-10/-20  
ꢀꢀ●Independent-opening double-lever design  
ꢀꢀ●Slim body to allow easy clamping  
even for narrow conductors  
39mm  
(1.54")  
Light100g, Slim16mm  
400g  
ꢀꢀ●Eliminates magnetization-induced heat and  
noise, even in heavy-current measurement  
ꢀꢀ●No metal (iron core) exposure, ensuring  
enhanced safety  
(14.1oz.)  
(3.5 oz.)  
(0.63")  
Right / Left hand capability  
True RMS  
The 3280-20 performs accurate measurements of even small  
currents in the AC 42.00 A range.  
●ꢀTest Lead Holder  
for convenient voltage  
measurement  
It also guarantees accuracy of True RMS measurements for  
frequencies from 40 Hz to 1 kHz.  
Current waveform of the switching  
power supply (primary side)  
removable  
9209 TEST LEADS HOLDER  
(optional)  
Prevents careless mistakes  
●ꢀAuto-power save  
No Fuse  
to conserve battery life  
●ꢀPTC Protected (Non-fuse type)  
protects up to 250 V AC/DC  
Required  
True RMS method  
3280-20  
MEAN value method  
3280-10  
Crest factor: 2.5 max. (Applies to input of at least 60% of the range.)  
■ꢀ3280-10/-20 Specifications (accuracy at 23˚C±5˚C (73˚F  
±
9˚F), 80% rh or less)  
DCV/ACV - 600 V DC /AC rms; ohms/continuity - 250 V AC rms Applicable  
Function  
Range (Accuracy)  
standards: Safety - EN61010-1:1993 + A2:1995, EN61010-1:2001 CAT III  
600V(AC A), CAT III 300V, CAT II 600V(AC/DC V), UL 61010B-1:2003;  
EMC - EN61326:1997 + A1:1998 + A2:2001 Drop-proof: 3280-10/-20  
can with-stand a 1m drop onto a concrete floor Location for use: Indoors,  
altitude up to 2000 m Ambient temperature of use: 0 to 40˚C(32˚F to 104˚F),  
80%rh (no condensation) Storage temperature range: -10 to 50˚C (14˚F to 122  
(0.06 ) - 42.00 / 420.0 / 1000 A  
(50 to 60Hz: ±1.5%rdg.±5dgt. (3280-10)  
(45 to 66Hz: ±1.5%rdg.±5dgt. (3280-20))  
)
AC current  
(40 to 45Hz or 66 to 1kHz: ±2.0%rdg.±5dgt. (3280-20))  
420.0 m / 4.200 / 42.00 / 420.0 / 600 V  
(±1.3%rdg.±4dgt.)  
DC voltage  
˚F)  
,
(no condensation) Power source: CR2032 battery1 (3V DC)  
4.200 / 42.00 / 420.0 / 600 V  
(±2.3%rdg.±8dgt.)  
AC voltage  
Continuous operating time: approx. 150 hours (3280-10), 50 hours (3280-20)  
(50 to 500 Hz)  
Dimensions and mass: Approx. 57 W175 H16 D mm, 100 g (Approx 2.2" (W )  
6.9" (H)✕ꢀ0.6" (D), 3.5 oz.) Accessories: battery, carrying case, test leads and manual  
420.0 / 4.200 k / 42.00 k / 420.0k /  
4.200 M / 42.00 MΩ 2.0%rdg.  
Resistance  
(open terminal voltage 3.4 V max.  
1
*
)
±
4dgt.*2)  
420.0 Ω (±2.0%rdg.±6dgt.)  
Buzzer sounds at approx 50 Ω or less )  
Continuity  
WARNING Inspect the unit and check that it is operating correctly before use. When  
carrying out measurement on live lines, wear proper protective gear, insulating rubber gloves,  
insulating rubber boots and safety helmet, and use extreme caution to avoid electric shock accidents.  
(
(
open terminal voltage 3.4 V max.)  
*1. at 420 Ω. (4.2k 0.7V (typ.) 42k to 42M 0.5V (typ.)  
)
*2. at 420 to 420kΩ. (4.2MΩ ±5.0%rdg.±4dgt. 42MΩ ±10.0%rdg.±4dgt.)  
DANGER  
In order to prevent short-circuits and injury, use the clamp product on electrical  
circuits with a voltage less than the maximum operation circuit voltage.  
AC measurement: mean value Ancillary functions: auto ranging, data  
hold function, auto power save function, battery life warning function  
Options  
Display: Max.4199-count LCD Sampling rate: 2.5 times/sec (Fast), 1  
9209 TEST LEAD HOLDER  
times/3sec (Slow) Measurable conductor diameter: ø33mm (1.30")max. ●  
Maximum rated voltage to earth: CAT III 600 V (Current measurement section),  
CAT III 300 V, CAT II 600 V (Voltage measurement section) Max.input current:  
2000 A rms cont. Max.input voltag: 600 V rms Effect of conductor position:  
within ±5.0 % in any direction from the center of sensor Overload protection:  
Includes 9208 TEST LEAD and 9398 CARRYING CASE  
DISTRIBUTED BY  
HEAD OFFICE :  
Shanghai Representative Office :  
81 Koizumi, Ueda, Nagano, 386-1192, Japan  
1704 Shanghai Times Square Office  
TEL +81-268-28-0562 / FAX +81-268-28-0568 93 Huaihai Zhong Road  
E-mail: os-com@hioki.co.jp  
Shanghai, 200021, P.R.China  
TEL +86-21-6391-0090, 0092  
FAX +86-21-6391-0360  
E-mail: info@hioki.cn  
HIOKI USA CORPORATION :  
6 Corporate Drive, Cranbury, NJ 08512 USA  
TEL +1-609-409-9109 / FAX +1-609-409-9108  
E-mail: hioki@hiokiusa.com  
All information correct as of Sep. 29, 2004. All specifications are subject to change without notice.  
3280sE1-49E-05P Printed in Japan