3293--Datasheet/数据表在线中文翻译

CLAMP ON HiTESTER

3291

3293

CLAMP ON LEAK HiTESTER

Clamp Testers

The World's First Flip Clamp!

For leak and load current: 3293 (0.06mA to 1000A)

For load current: 3291 (0.06A to 1000A)

✔

Stylish pocket-size design

✔ Backlit display with automatic reverse feature

✔ Filter

10uA

Resolution

3293

3291

Load current

Leak and load current

Flip-type clamp on design delivers the ease-of-use demanded by ﬁeld technicians

Flip-down display keeps readings in easy view whether the target wire is up high or down low

Equipped with an innovative display that flips down for easy visibility, the 3291 and 3293 are designed for efficient

measurement of indoor wiring in a variety of environments, from factories, buildings, and ofﬁces to residences.

Easy measurement of wires on ceilings

■

Easy to read means easy to use

Display rotates freely through 180° to keep

❏

measurements in view.

Flip angle: 180°

Easy to see, even when held up high

■

Measurement reading reverses automatically when

Backlight lets you read measurements in dim

❏

the display is ﬂipped open to ensure readability.

locations

•

Push and hold for 2 seconds to activate

Backlight goes out automatically after 15 seconds

Display can also be reversed manually

with the press of a button.

Easy to see, even when held down low

■

New clamp design is easier to attach

Slim clamp with a wide aperture attaches easily, requiring only

12.5 mm of space between wires.

Unmatched ease of use

Open Jaws to Power On

Clamp meter turns on automatically when the clamp is opened so you

❏

can begin taking measurement immediately.

Automatically turns off 1 minute after input falls to 0A following

measurement. (Can be manually disabled.)

Slim core opens wide for easier clamping.

❏

3291

3293

11mm

8mm

Up to 24 mm in diameter

Up to 30 mm in diameter

Sometimes it’s easier to clamp the

target wire at an angle.

Extensive current measurement functions

Use with 3-phase 4-wire 440V lines

True RMS lets you measure even distorted currents accurately

3291: CAT III 600 V (CAT IV 300 V)

3293: CAT III 300 V

True RMS ensures accurate measurement,

even of distorted load and leak currents

Why does the same current yield different readings?

❏

Averaging-type clamp on

current meter

Measure leak and load current with the 3293

The 3293 features 6 ranges from 30 mA to 1000A,

offering ±5% rdg ±5 dgt measurement accuracy of 1mA

leak currents.

Inverters, ofﬁce equipment, AC adapters -

most load current waveforms are distorted.

Current meters that display average

rectiﬁed RMS values does not allow you to

obtain accurate RMS measurements.

True RMS clamp on

current meter

Easy-to-use auto range feature

❏

3293 Leak current easurement

Load current measurement

30.00mA 300.0mA 6.000A

60.00A

600.0A

1000A

Range

Filter out noise

3291 Leak current easurement

Range

Load current measurement

The 3291 and 3293 incorporate a switchable high-frequency

noise ﬁlter. When activated, this ﬁlter rejects frequencies of

180 Hz and above to enable measurement approximating the

ﬁlter characteristics of an earth leakage circuit breaker (ELCB).

60.00A

600.0A

Get the maximum value of ﬂuctuating current readings

❏

3293

Actual Size

Push and hold for 2

seconds to activate ﬁlter

Filter on

Measure ﬂuctuating currents with the peak hold feature

The 3291 and 3293’s peak hold feature (with bar graph hold) lets you

capture peak values for currents that ﬂuctuate due to load variability.

current.

Easy measurement of the peak value of a ﬂuctuating

❏

*Holds the peak value for data updated approximately 2 times/second.

Current (A)

Peak value display

Peak value is held on the bar graph.

Time

Loop a wrist strap through the small opening to

help keep the instrument from being dropped

■ 3291, 3293 Speciﬁcations (accuracy at 23˚C±5˚C (73˚F±9˚F), 80% RH or less)

Pocket Size Clamp On Design

Fits perfectly into a shirt pocket.

3291

3293

Load

Leak and load

Measurable

conductor size

ø30mm (1.18")max.

ø24mm (0.94")max.

Compact design for superior

portability

❏

True RMS

Rectification

AC600Vrms

AC300Vrms

Max. rated voltage to earth

Measurement Range

•Auto Range switching

30mA/300mA/

60A/600A/1000A

6A/60A/600A/1000A

•Zero-suppress at 5 counts

±1.5%rdg. ±5dgt. (50Hz to 60Hz),

±5%rdg. ±5dgt. (1mA to 2.70mA)

filter OFF: ±2.0%rdg. ±5dgt. (45 to 66Hz),

Accuracy

filter ON: fc=180Hz

3291

±3.0%rdg. ±5dgt. (66 to 400Hz)

Actual Size

(Add±1%rdg. for when using 60A on the 3293)

1 Year (or opening and closing of the sensor 10,000 times)

Guaranteeed Accuracy Period

Accuracy Guaranteed

Measurements

Minimum 1.00mA

Minimum 5.40A

(Add±1%rdg. for readings of 0.270 to 0.540A )

2.8 max (1.6 max when current exceeds 600A)

Crest factor

Max. 1.5s

Response Time

(Refers to time required to achieve 90% of accuracy specifications)

Approx. 2 times/second (Bar graph: Approx. 4 times/second)

Add (0.05 x accuracy specifications)/°C (at 0°C to 40°C)

Display Refresh Rate

Temperature Coefﬁcient

Effect of

Conductor Position

Effect of External

Magnetic Field

within ±0.1% (at or below 6A range)

within ±5.0%

within ±5.0% (at or below 60A range)

Max 7.5mA (within a 400A/m

not defined

magnetic field, at or below 6A range)

Display hold, maximum value hold (hold bar graph position),

reversible LCD display, backlight, auto power off, auto power

on when jaws are open, battery level indication

Other Functions

0°C to 40°C/32°F to 104°F, 80%rh max. (no condensation)

-10°C to 50°C/14°F to 122°F, 80%rh max. (no condensation)

Usage Environment

Storage Environment

EN61010-2-032

Type A current sensor,

CAT III 300V, EN61326

EN61010-2-032

Type A current sensor,

CAT III 600V, CAT IV 300V, EN61326

Standards

Rated Voltage and

DC3V, 25mVA

maximum rated power

Power Supply and

max. continuous use

Button type lithium battery (CR2032) x 1,

Approx. 10 hours (continuous, no load)

50W×136H×26Dmm, 90g

50W×130H×26Dmm, 120g

1.97"× 5.12" × 1.02", 4.2 oz.

Dimensions and mass

1.97"×

5.35" H

1.02" D, 3.2 oz.

Convenient portable case

Soft case protects the instrument inside toolboxes.

❏

Included soft case protects the

i n s t r u m e n t a n d a t t a c h e s

conveniently to your belt.

Carrying Case Model 9757

(included

Attaches to belt

Inside toolboxes

)

Bundled Accessories: Carrying Case 9757 x 1, Wrist strap x 1, Button type lithium battery (CR2032 - test use only) x 1, Instruction Manual x 1,

Basic Operation Sticker x 1

HIOKI (Shanghai) Sales & Trading Co., Ltd. :

DISTRIBUTED BY

1904 Shanghai Times Square Ofﬁce, 93 Huai Hai Zhong Road

Shanghai, P.R.China POSTCODE: 200021

TEL +86-21-6391-0090/0092 FAX +86-21-6391-0360

E-mail: info-sh@hioki.cn

Beijing Ofﬁce :

HEAD OFFICE :

A-2602 Freetown, 58 Dong San Huan Nan Road

Beijing, P.R.China POSTCODE: 100022

TEL +86-10-5867-4080/4081 FAX +86-10-5867-4090

E-mail: info-bj@hioki.cn

81 Koizumi, Ueda, Nagano, 386-1192, Japan

TEL +81-268-28-0562 / FAX +81-268-28-0568

E-mail: os-com@hioki.co.jp

Guangzhou Ofﬁce :

HIOKI USA CORPORATION :

Room 303, Proﬁt Plaza, No.76, West Huangpu Road

Guangzhou, P.R.China POSTCODE: 510623

TEL +86-20-38392673/2676 FAX +86-20-38392679

E-mail: info-gz@hioki.cn

6 Corporate Drive, Cranbury, NJ 08512 USA

TEL +1-609-409-9109 / FAX +1-609-409-9108

E-mail: hioki@hiokiusa.com

All information correct as of Jul. 12, 2007. All speciﬁcations are subject to change without notice.

3291sE1-77M-20P Printed in Japan