SAW Bandpass Filter 230101B
3. Specifications
Fo = 72.5 MHz
Terminating source impedance : 50Ω and matching network
Terminating load impedance
: 50Ω and matching network
Operating temperature range : -10℃ ~ +60℃
Minimum
Typical
72.5
21.0
1.4
Maximum
Center Frequency
MHz
dB
72.45
72.55
24.0
-
Insertion Loss
-
1dB Bandwidth
MHz
MHz
MHz
dB
1.35
3dB Bandwidth
-
-
1.6
-
40dB Bandwidth
2.35
0.5
2.4
1.0
250
3.3
-
Amplitude Ripple (Fo +/- 0.615 MHz)
Group Delay Variation (Fo +/- 0.615 MHz)
Absolute Delay
-
nsec
usec
dB
-
150
-
3.17
55
Ultimate Rejection
50
-
Temperature Coefficient of Frequency
ppm/°C2
-0.03
-
Notes :
1) All specifications are based on the matching schematic shown below
2) All specifications are measured by Agilent Network analyzer and full 2 port calibration
3) Electrical margin has been built into the design to account for the variations due to temperature drift and
manufacturing tolerances
4) All attenuation measurements are measured relative to insertion loss
I T F Co., Ltd.
Part No.
Rev. Date
Rev.
230101B
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
2004-03-16
2/5
NW3022-CS02