SAW Bandpass Filter 201071C
3. Specifications
Fo = 70.0 MHz
Terminating source impedance : 50Ω and matching network
Terminating load impedance
: 50Ω and matching network
Minimum
Typical
70.0
8.8
Maximum
Center Frequency
MHz
dB
69.96
70.04
Insertion Loss
-
12.0
1dB Bandwidth
MHz
MHz
MHz
dB
-
0.19
0.33
1.06
0.3
-
-
3dB Bandwidth
0.25
40dB Bandwidth
-
-
-
-
-
1.20
0.6
300
-
Amplitude Ripple (Fo +/- 0.05 MHz)
Group Delay Variation (Fo +/- 0.05 MHz)
Absolute Delay
nsec
usec
100
3.05
-0.03
Temperature Coefficient of Frequency
ppm/°C2
-
Notes :
1) All specifications are based on the matching schematic shown below
2) All specifications are measured by Agilent Network analyzer and full 2 port calibration at room temperature
3) All attenuation measurements are measured relative to insertion loss
I T F Co., Ltd.
Part No.
Rev. Date
Rev.
201071C
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
2004-06-08
2/5
NI2031-CS03