Document 159-1
Chip Inductors
–
0805HS Series (2012)
Ceramic body and wire wound construction provide highest
SRFsavailablein0805size. Theseultra-compactinductors
provide exceptional Q values, even at high frequencies.
Free evaluation samples are available by contacting
Coilcraft or ordering them on-line at www.coilcraft.com.
Inductance2
(nH)
Percent
SRF min5
(MHz)
DCR max6
(Ohms)
Irms7
(mA)
Color
code
Part number1
tolerance3
Q min4
0805HS-030TJL_
0805HS-060TJL_
0805HS-080TJL_
0805HS-100TJL_
0805HS-120TJL_
3.3 @ 250 MHz
6.8 @ 250 MHz
8.2 @ 250 MHz
10 @ 250 MHz
12 @ 250 MHz
5
5
5
5
5
50 @ 1500MHz
50 @ 1000MHz
50 @ 1000MHz
60 @ 500MHz
50 @ 500MHz
7900
5500
4700
4200
4000
0.08
0.11
0.12
0.10
0.15
600
600
600
600
600
Black
Brown
Red
Blue
Orange
0805HS-150TJL_
0805HS-180TJL_
0805HS-220T_L_
0805HS-270T_L_
0805HS-330T_L_
15 @ 250 MHz
18 @ 250 MHz
22 @ 250 MHz
27 @ 250 MHz
33 @ 250 MHz
5
5
5,2
5,2
5,2
50 @ 500MHz
50 @ 500MHz
55 @ 500MHz
55 @ 500MHz
60 @ 500MHz
3400
3300
2600
2500
2050
0.17
0.20
0.22
0.25
0.27
600
600
500
500
500
Yellow
Green
Blue
Violet
Gray
0805HS-390T_L_
0805HS-470T_L_
0805HS-560T_L_
0805HS-680T_L_
0805HS-820T_L_
39 @ 250 MHz
47 @ 200 MHz
56 @ 200 MHz
68 @ 200 MHz
82 @ 150 MHz
5,2
5,2
5,2,1
5,2,1
5,2,1
60 @ 500MHz
60 @ 500MHz
60 @ 500MHz
60 @ 500MHz
65 @ 500MHz
2000
1650
1550
1450
1300
0.29
0.31
0.34
0.38
0.42
500
500
500
500
400
White
Black
Brown
Red
Orange
0805HS-101T_L_
0805HS-121T_L_
0805HS-151T_L_
0805HS-181T_L_
0805HS-221T_L_
100 @ 150 MHz
120 @ 150 MHz
150 @ 100 MHz
180 @ 100 MHz
220 @ 100 MHz
5,2,1
5,2,1
5,2,1
5,2,1
5,2
65 @ 500MHz
50 @ 250MHz
50 @ 250MHz
50 @ 250MHz
50 @ 250MHz
1200
1100
920
870
850
0.46
0.51
0.56
0.64
0.70
400
400
400
400
400
Yellow
Green
Blue
Violet
Gray
1. When ordering, specify tolerance, termination and packaging codes:
0805HS-221TJLC
Core material Ceramic
Terminations RoHS compliant silver-palladium-platinum-glass frit.
Other terminations available at additional cost.
Tolerance: F = 1% G = 2% J = 5%
Weight 9.8 – 10.9 mg
(Table shows stock tolerances in bold.)
Termination: L = RoHS compliant silver-palladium-platinum-glass frit.
Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or
S = non-RoHS tin-lead (63/37).
Ambient temperature –40°C to +85°C with Irms current, +85°C to
+100°C with derated current
Storage temperature Component: –40°C to +100°C.
Packaging: –40°C to +80°C
Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic
tape (2000 parts per full reel).
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use
code letter C instead.
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Temperature Coefficient of Inductance (TCL) +25 to +125 ppm/°C
D = 13″ machine-ready reel. EIA-481 embossed plastic
tape (7500 parts per full reel).
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
2. Inductance measured using a Coilcraft SMD-A fixture in an Agilent/HP
4286A impedance analyzer with Coilcraft-provided correlation pieces.
3. Tolerances in bold are stocked for immediate shipment.
4. Q measured using an Agilent/HP 4291A with an Agilent/HP 16193 test
fixture.
MeanTime Between Failures (MTBF) 1 billion hours
Packaging 2000/7″ reel; 750/13″ reel Paper tape: 8 mm wide,
0.23 mm thick, 4 mm pocket spacing, 1.3 mm pocket depth
5. SRF measured using an Agilent/HP 8720D network analyzer and a
Coilcraft SMD-D test fixture.
PCB washing Only pure water or alcohol recommended
6. DCR measured on a Cambridge Technology micro-ohmmeter and a
Coilcraft CCF858 test fixture.
7. Current that causes a 15°C temperature rise from 25°C ambient.
8. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Specifications subject to change without notice.
Please check our website for latest information.
Document159-1 Revised09/21/07
© Coilcraft, Inc. 2009
