1N4001PT
THRU
CHENMKO ENTERPRISE CO.,LTD
SILICON RECTIFIER
1N4007PT
VOLTAGE RANGE 50 - 1000 Volts CURRENT 1.0 Ampere
FEATURES
* Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
* Low cost
* Low leakage
* Low forward voltage drop
* High current capability
DO-41
0.034(0.9)
DIA.
0.028(0.7)
1.0(25.4)
MIN.
MECHANICAL DATA
Case: JEDEC DO-41 molded plastic
Terminals: Plated axial leads, solderable per MIL-STD-750,
Method 2026
Polarity: Color band denotes cathode end
Mounting Position: Any
0.205(5.2)
0.166(4.2)
0.107(2.7)
0.080(2.0)
DIA.
1.0(25.4)
MIN.
Weight: 0.33 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25oC ambient temperature unless otherwise specified.
Single phase, half wave, 60 HZ, resistive or inductive load.
For capacitive load, derate current by 20%.
Dimensions in inches and (millimeters)
DO-41
MAXIMUM RATINGES ( At TA = 25oC unless otherwise noted )
RATINGS
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
SYMBOL
VRRM
1N4001PT 1N4002PT 1N4003PT 1N4004PT 1N4005PT 1N4006PT 1N4007PT UNITS
50
35
50
100
70
200
140
200
400
280
400
600
420
600
800
560
800
1000
700
Volts
Volts
Volts
VRMS
Maximum DC Blocking Voltage
VDC
100
1000
Maximum Average Forward Rectified Current at TA = 75oC
IO
1.0
30
Amps
Amps
Peak Forward Surge Current 8.3 ms single half sine-wave
superimposed on rated load (JEDEC method)
IFSM
CJ
Typical Junction Capacitance ( Note )
Typical Thermal Resistance
15
50
pF
R
JA
oC / W
oC
Operating and Storage Temperature Range
TJ, TSTG
-65 to +175
ELECTRICAL CHARACTERISTICS ( At TA = 25oC unless otherwise noted )
CHARACTERISTICS
SYMBOL
1N4001PT 1N4002PT 1N4003PT 1N4004PT 1N4005PT 1N4006PT 1N4007PT UNITS
Maximum Instantaneous Forward Voltage at 1.0 A DC
VF
IR
1.1
5.0
50
Volts
@ TA = 25oC
@ TA = 100oC
uAmps
uAmps
Maximum Reverse Current at rated
DC blocking Voltage per leg
Maximum Full Load Reverse Current Average, Full Cycle
0.375" (9.5mm) lead length at TL = 75oC
30
uAmps
2001-6
NOTES : Measured at 1.0 MHZ and applied reverse voltage of 4.0 volts
