转到网站首页
转为中文步骤:
1、请用电脑端360浏览器打开本页地址,如您电脑未安装360浏览器,请点这里下载;
2、点击360浏览器右上角的翻译插件,如右图红圈中所示:
3、点击所弹出窗口里的右下角的按钮 “翻译当前网页”;
4、弹窗提示翻译完毕后关闭弹窗即可;
January 2007  
rev 1.1  
ASM2P2304NZ  
Four Output PCI-X and General Purpose Buffer  
Functional Description  
Features  
One input to four Output Buffer/Driver  
The ASM2P2304NZ is a low-cost buffer designed to  
distribute high-speed clocks for PCI-X and other  
applications. The device operates at 3.3V and outputs can  
run up to 140 MHz.  
General-purpose or PCI-X clock buffer  
Buffers all frequencies from DC to 140 MHz  
Output-to-output skew less than 100 pS  
Available in 8-pin TSSOP and SOIC Packages  
3.3V operation  
Table 1. Function Table.  
Inputs  
Outputs  
BUF_IN  
OE  
Output [1:4]  
L
H
L
L
L
L
L
H
H
L
H
H
Block Diagram  
Logic  
OE  
Control  
BUF_ IN  
OUTPUT 1  
OUTPUT 2  
OUTPUT 3  
OUTPUT 4  
PulseCore Semiconductor Corporation  
1715 S. Bascom Ave Suite 200, Campbell, CA 95008 Tel: 408-879-9077 Fax: 408-879-9018  
www.pulsecoresemi.com  
Notice: The information in this document is subject to change without notice.  
January 2007  
rev 1.1  
ASM2P2304NZ  
Pin Configuration  
BUF_IN  
OUTPUT 4  
OUTPUT 3  
1
2
3
8
7
6
OE  
OUTPUT 1  
GND  
ASM2P2304NZ  
VDD  
4
OUTPUT 2  
5
Pin Description  
Pin Name  
BUF_IN1  
Pin #  
1
Type  
Description  
Input clock. 5V Tolerant Input  
I
Input pin for Output Enable, active HIGH.  
2
OE  
I
Connect to VDD  
3
4
5
6
7
Output 12  
GND  
Output 22  
VDD  
Output 32  
Output 42  
O
P
Output 1  
Ground  
O
P
Output 2  
3.3V Voltage Supply  
Output 3  
O
O
8
Output 4  
Notes :  
1.  
2.  
Weak pull down on input  
Weak pull down on all outputs  
Four Output PCI-X and General Purpose Buffer  
2 of 9  
Notice: The information in this document is subject to change without notice.  
January 2007  
rev 1.1  
ASM2P2304NZ  
Absolute Maximum Ratings  
Parameter  
Description  
Min  
7
Max  
V
Supply Voltage to Ground Potential  
DC Input Voltage (Except BUF_IN)  
DC Input Voltage (BUF_IN)  
Storage Temperature  
-0.5  
-0.5  
-0.5  
-65  
VDD + 0.5  
7
V
V
+150  
260  
°C  
°C  
°C  
Max. Soldering Temperature (10 sec)  
Junction Temperature  
150  
Static Discharge Voltage  
2000  
V
(As per JEDEC STD22- A114-B)  
Note: These are stress ratings only and functional usage is not implied. Exposure to absolute maximum ratings for prolonged periods can affect device  
reliability.  
Operating Conditions  
Parameter  
Description  
Min  
Max  
Unit  
VDD  
Supply Voltage  
3.0  
3.6  
V
TA  
CL  
Operating Temperature (Ambient Temperature)  
Load Capacitance  
-40  
-
85  
25  
7
°C  
pF  
CIN  
Input Capacitance  
-
pF  
BUF_IN,  
Operating Frequency  
DC  
0.05  
140  
50  
MHz  
mS  
OUTPUT [1:4]  
Power-up time for all VDD's to reach minimum specified  
Voltage (Power ramps must be monotonic)  
tPU  
Four Output PCI-X and General Purpose Buffer  
3 of 9  
Notice: The information in this document is subject to change without notice.  
January 2007  
rev 1.1  
ASM2P2304NZ  
Electrical Characteristics  
Parameter  
Description  
Test Conditions  
Min  
-
Max  
0.8  
-
Unit  
V
VIL  
VIH  
IIL  
Input LOW Voltage1  
Input HIGH Voltage1  
Input LOW Current  
Input HIGH Current  
2.0  
-5  
-5  
-
V
VIN = 0V  
VIN= VDD  
5
µA  
µA  
V
IIH  
12  
0.8  
0.55  
-
IOL= 24 mA  
IOL= 12 mA  
IOH= –24 mA  
VOL  
Output LOW Voltage2  
-
V
2.0  
2.4  
-
V
VOH  
Output HIGH Voltage2  
Supply Current  
I
OH= –12 mA  
-
V
IDD  
Unloaded outputs at 66.66 MHz  
25  
mA  
Switching Characteristics for Commercial and Industrial Temperature Devices3  
Parameter  
Name  
Duty Cycle2 = t2 ÷t1  
Rise Time2  
Description  
Min  
Typ  
Max  
Unit  
%
tD  
t3  
t4  
Measured at 1.5V  
40.0  
50.0  
60.0  
1.50  
1.50  
Measured between 0.8V and 2.0V  
Measured between 2.0V and 0.8V  
-
-
-
-
nS  
Fall Time2  
nS  
All outputs  
equally  
For Commercial parts  
For Industrial parts  
-
-
-
-
100  
150  
t5  
t6  
Output to Output Skew2  
pS  
nS  
loaded  
Propagation Delay,  
BUF_IN Rising Edge to  
Measured at VDD/2  
2.5  
3.5  
5
OUTPUT Rising Edge2  
Note:  
1. BUF_IN input has a threshold voltage of VDD/2.  
2. Parameter is guaranteed by design and characterization. It is not 100% tested in production.  
3. All parameters specified with loaded outputs.  
Four Output PCI-X and General Purpose Buffer  
4 of 9  
Notice: The information in this document is subject to change without notice.  
January 2007  
rev 1.1  
ASM2P2304NZ  
Switching Waveforms  
Duty Cycle Timing  
All Outputs Rise/Fall Time  
Output-Output Skew  
Input-Output Propagation Delay  
Four Output PCI-X and General Purpose Buffer  
5 of 9  
Notice: The information in this document is subject to change without notice.  
January 2007  
rev 1.1  
ASM2P2304NZ  
Package Information  
8-lead Thin Shrunk Small Outline Package (4.40-MM Body)  
H
E
D
A2  
A
C
θ
e
A1  
L
B
Dimensions  
Symbol  
Inches  
Millimeters  
Min  
Max  
Min  
Max  
A
A1  
A2  
B
0.043  
0.006  
0.037  
0.012  
0.008  
0.122  
0.177  
1.10  
0.15  
0.95  
0.30  
0.20  
3.10  
4.50  
0.002  
0.033  
0.008  
0.004  
0.114  
0.169  
0.05  
0.85  
0.19  
0.09  
2.90  
4.30  
c
D
E
e
0.026 BSC  
0.252 BSC  
0.65 BSC  
6.40 BSC  
H
L
0.020  
0°  
0.028  
8°  
0.50  
0°  
0.70  
8°  
θ
Four Output PCI-X and General Purpose Buffer  
6 of 9  
Notice: The information in this document is subject to change without notice.  
January 2007  
rev 1.1  
ASM2P2304NZ  
Package Information  
8-lead (150-mil) SOIC Package  
H
E
D
A2  
A
C
θ
e
A1  
L
B
Dimensions  
Symbol  
Inches  
Millimeters  
Min  
Max  
0.010  
0.069  
0.059  
0.020  
0.010  
Min  
0.10  
1.35  
1.25  
0.31  
0.18  
Max  
0.25  
1.75  
1.50  
0.51  
0.25  
A1  
A
0.004  
0.053  
0.049  
0.012  
0.007  
A2  
B
C
D
E
0.193 BSC  
0.154 BSC  
0.050 BSC  
0.236 BSC  
4.90 BSC  
3.91 BSC  
1.27 BSC  
6.00 BSC  
e
H
L
0.016  
0°  
0.050  
8°  
0.41  
0°  
1.27  
8°  
θ
Four Output PCI-X and General Purpose Buffer  
7 of 9  
Notice: The information in this document is subject to change without notice.  
January 2007  
rev 1.1  
ASM2P2304NZ  
Ordering Codes  
Part Number  
Marking  
2P2304NZF  
Package Type  
8-pin SOIC - Tube, Pb Free  
8-pin SOIC - Tape and Reel, Pb Free  
8-pin SOIC - Tube, Pb Free  
8-pin SOIC - Tape and Reel, Pb Free  
8-pin SOIC - Tube, Green  
8-pin SOIC - Tape and Reel, Green  
8-pin SOIC - Tube, Green  
8-pin SOIC - Tape and Reel, Green  
8-pin TSSOP - Tube, Pb Free  
8-pin TSSOP - Tape and Reel, Pb Free  
8-pin TSSOP - Tube, Pb Free  
8-pin TSSOP - Tape and Reel, Pb Free  
8-pin TSSOP - Tube, Green  
8-pin TSSOP - Tape and Reel, Green  
8-pin TSSOP - Tube, Green  
8-pin TSSOP - Tape and Reel, Green  
Temperature  
Commercial  
Commercial  
Industrial  
ASM2P2304NZF-08-ST  
ASM2P2304NZF-08-SR  
ASM2I2304NZF-08-ST  
ASM2I2304NZF-08-SR  
ASM2P2304NZG-08-ST  
ASM2P2304NZG-08-SR  
ASM2I2304NZG-08-ST  
ASM2I2304NZG-08-SR  
ASM2P2304NZF-08-TT  
ASM2P2304NZF-08-TR  
ASM2I2304NZF-08-TT  
ASM2I2304NZF-08-TR  
ASM2P2304NZG-08-TT  
ASM2P2304NZG-08-TR  
ASM2I2304NZG-08-TT  
ASM2I2304NZG-08-TR  
2P2304NZF  
2I2304NZF  
2I2304NZF  
2P2304NZG  
2P2304NZG  
2I2304NZG  
2I2304NZG  
2P2304NZF  
2P2304NZF  
2I2304NZF  
2I2304NZF  
2P2304NZG  
2P2304NZG  
2I2304NZG  
2I2304NZG  
Industrial  
Commercial  
Commercial  
Industrial  
Industrial  
Commercial  
Commercial  
Industrial  
Industrial  
Commercial  
Commercial  
Industrial  
Industrial  
Device Ordering Information  
A S M 2 P 2 3 0 4 N Z F - 0 8 - T R  
R = Tape & Reel, T = Tube or Tray  
O = SOT  
U = MSOP  
E = TQFP  
L = LQFP  
U = MSOP  
P = PDIP  
S = SOIC  
T = TSSOP  
A = SSOP  
V = TVSOP  
B = BGA  
D = QSOP  
X = SC-70  
Q = QFN  
DEVICE PIN COUNT  
F = LEAD FREE AND RoHS COMPLIANT PART  
G = GREEN PACKAGE, LEAD FREE, and RoHS  
PART NUMBER  
X= Automotive  
I= Industrial  
P or n/c = Commercial  
(0C to +70C)  
(-40C to +125C) (-40C to +85C)  
1 = Reserved  
6 = Power Management  
7 = Power Management  
8 = Power Management  
9 = Hi Performance  
0 = Reserved  
2 = Non PLL based  
3 = EMI Reduction  
4 = DDR support products  
5 = STD Zero Delay Buffer  
PulseCore Semiconductor Mixed Signal Product  
Licensed under US patent #5,488,627, #6,646,463 and #5,631,920.  
Four Output PCI-X and General Purpose Buffer  
8 of 9  
Notice: The information in this document is subject to change without notice.  
January 2007  
rev 1.1  
ASM2P2304NZ  
PulseCore Semiconductor Corporation  
1715 S. Bascom Ave Suite 200  
Campbell, CA 95008  
Copyright © PulseCore Semiconductor  
All Rights Reserved  
Part Number: ASM2P2304NZ  
Document Version: 1.1  
Tel: 408-879-9077  
Fax: 408-879-9018  
www.pulsecoresemi.com  
Note: This product utilizes US Patent # 6,646,463 Impedance Emulator Patent issued to PulseCore Semiconductor, dated 11-11-2003  
© Copyright 2006 PulseCore Semiconductor Corporation. All rights reserved. Our logo and name are trademarks or  
registered trademarks of PulseCore Semiconductor. All other brand and product names may be the trademarks of their  
respective companies. PulseCore reserves the right to make changes to this document and its products at any time without  
notice. PulseCore assumes no responsibility for any errors that may appear in this document. The data contained herein  
represents PulseCore’s best data and/or estimates at the time of issuance. PulseCore reserves the right to change or correct  
this data at any time, without notice. If the product described herein is under development, significant changes to these  
specifications are possible. The information in this product data sheet is intended to be general descriptive information for  
potential customers and users, and is not intended to operate as, or provide, any guarantee or warrantee to any user or  
customer. PulseCore does not assume any responsibility or liability arising out of the application or use of any product  
described herein, and disclaims any express or implied warranties related to the sale and/or use of PulseCore products  
including liability or warranties related to fitness for a particular purpose, merchantability, or infringement of any intellectual  
property rights, except as express agreed to in PulseCore’s Terms and Conditions of Sale (which are available from  
PulseCore). All sales of PulseCore products are made exclusively according to PulseCore’s Terms and Conditions of Sale.  
The purchase of products from PulseCore does not convey a license under any patent rights, copyrights; mask works rights,  
trademarks, or any other intellectual property rights of PulseCore or third parties. PulseCore does not authorize its products  
for use as critical components in life-supporting systems where a malfunction or failure may reasonably be expected to result  
in significant injury to the user, and the inclusion of PulseCore products in such life-supporting systems implies that the  
manufacturer assumes all risk of such use and agrees to indemnify PulseCore against all claims arising from such use.  
Four Output PCI-X and General Purpose Buffer  
9 of 9  
Notice: The information in this document is subject to change without notice.