1N4001-1N4007
PLASTIC SILICON RECTIFIERS
Unit: inch(mm)
DO-41
CURRENT
VOLTAGE
1.0 Amperes
50 to 1000 Volts
FEATURES
• Low forward voltage drop
• High current capability
• High reliability
.034(.86)
.028(.71)
• High surge current capability
• Exceeds environmental standards of MIL-S-19500/228
• In compliance with EU RoHS 2002/95/EC directives
MECHANICAL DATA
• Case: DO-41 Molded plastic
.107(2.7)
.080(2.0)
• Epoxy: UL 94V-O rate flame retardant.
• Lead: Axial leads, solderable per MIL-STD-750,Method 2026
• Polarity: Color band denotes cathode end
• Mounting Position: Any
• Weight: 0.012 ounces, 0.30 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load,derate current by 20%.
1N4001 1N4002 1N4003 1N4004 1N4005 1N4006 1N4007
PARAMETER
SYMBOL
VRRM
UNITS
V
Maximum Recurrent Peak Reverse Voltage
50
35
50
100
70
200
140
200
400
280
400
1.0
30
600
420
600
800
560
800
1000
700
Maximum RMS Voltage
VRMS
VDC
IF(AV)
IFSM
VF
V
V
A
A
V
Maximum DC Blocking Voltage
100
1000
Maximum Average Forward Current .375"(9.5mm)
lead length at TA=75OC
Peak Forward Surge Current : 8.3ms single half sine-
wave superimposed on rated load (JEDEC method)
Maximum Forward Voltage at 1.0A
1.1
Maximum DC Reverse Current at Rated
DC Blocking Voltage
TJ=25OC
5.0
500
IR
μA
pF
TJ=100OC
Typical Junction Capacitance (Note 1)
Typical Thermal Resistance (Note 2)
CJ
15
RθJA
RθJC
RθJL
110
40
35
OC / W
Operating Junction and Storage Temperature Range
TJ,TSTG
-55 to +150
OC
NOTES:
1. Measured at 1 MHz and applied reverse voltage of 4.0 VDC.
2. Thermal Resistance from Junction to Ambient and from junction to lead at 0.375”(9.5mm)lead length P.C.B.mounted.
June 29,2010-REV.02
PAGE . 1
