150212-5002-TB [3M]

12 CONTACT(S), FEMALE, RIGHT ANGLE TWO PART BOARD CONNECTOR, SOLDER, SOCKET;
150212-5002-TB
型号: 150212-5002-TB
厂家: 3M ELECTRONICS    3M ELECTRONICS
描述:

12 CONTACT(S), FEMALE, RIGHT ANGLE TWO PART BOARD CONNECTOR, SOLDER, SOCKET

PC 连接器
文件: 总7页 (文件大小:921K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
3MBoardmount Socket  
2 mm x 2 mm Str. Surface Mount, Str. and R. A. Plated Through-Hole  
1502 Series  
•ꢀ High temperature dielectric  
•ꢀ Reflow solder compatible  
•ꢀ Surface mount and through hole mounting styles  
•ꢀ Industry standard compatible  
•ꢀ Minimizes PC board stacking heights  
•ꢀ End stackable feature  
•ꢀ Side stackable feature on PTH versions  
•ꢀ SMT Sockets are available in tape and reel with  
vacuum cap for automatic placement.  
•ꢀ See Regulatory InformationAppendix (RIA) for  
•ꢀ chemical compliance information  
Date Modified: January 23, 2008  
TS-0519-E  
Sheet 1 of 4  
Physical  
Insulator:  
Material: Glass Filled PCT  
Flammability: UL 94V-0  
Color: Black  
Contact:  
Material:  
Plating:  
CopperAlloy  
Underplating:  
50-150 μ” [ 1.27-3.81 μm ] Nickel overall  
WipingArea: 30 μ” [0.76 μm] Gold  
Solder Tails: 200 μ” [ 5.1 μm ] Matte Tin or Tin Lead (refer to ordering information)  
Orientation delta and 3M Logo  
Marking:  
Electrical  
1A  
Current Rating:  
Insulation Resistance:  
Withstanding Voltage:  
> 1 × 109 Ω at 250VDC  
500VDC at Sea Level  
Environmental  
-55°C to +105°C  
Temperature Rating:  
Maximum 260°C, (per J-STD-020C)  
1 (per J-STD-020C)  
Process Rating:  
Moisture Sensitivity Level:  
UL File No.: E68080  
3M is a trademark of 3M Company.  
For technical, sales or ordering information call  
800-225-5373  
3
Electronic Solutions Division  
Interconnect Solutions  
http://www.3M.com/interconnects/  
3MBoardmount Socket  
2 mm x 2 mm Str. Surface Mount, Str. and R. A. Plated Through-Hole  
1502 Series  
Table 1  
C
Contact  
Quantity  
Tape  
Width  
Order  
Code  
Dimension A  
4
0.156 [3.96]  
0.231 [5.87]  
0.310 [7.87]  
0.389 [9.88]  
0.467 [11.86]  
0.546 [13.87]  
0.625 [15.88]  
0.704 [17.88]  
0.782 [19.86]  
0.861 [21.87]  
0.940 [23.88]  
1.019 [25.88]  
1.097 [27.86]  
1.176 [29.87]  
1.255 [31.88]  
1.334 [33.88]  
1.412 [35.86]  
1.491 [37.87]  
1.570 [39.88]  
1.649 [41.88]  
1.727 [43.87]  
1.806 [45.87]  
1.885 [47.88]  
1.964 [49.89]  
n/a  
n/a  
n/a  
A
6
n/a  
(See Table 1)  
8
24 mm  
24 mm  
24 mm  
24 mm  
24 mm  
32 mm  
32 mm  
44 mm  
44 mm  
44 mm  
44 mm  
44 mm  
56 mm  
56 mm  
56 mm  
56 mm  
56 mm  
56 mm  
72 mm  
72 mm  
72 mm  
72 mm  
WB  
WB  
WB  
WB  
WB  
WD  
WD  
WD  
WD  
WD  
WD  
WD  
WE  
WE  
WE  
WE  
WE  
WE  
WF  
WF  
WF  
WF  
WF  
WF  
WF  
WG  
WG  
10  
12  
14  
16  
18  
20  
22  
24  
26  
28  
30  
32  
34  
36  
38  
40  
42  
44  
46  
48  
50  
52  
54  
56  
58  
60  
.220 ± .010  
[ 5.59 ]  
.020 [ 0.51 ]  
.043 [ 1.09 ]  
Mate Point  
Positions per row, subtract 1,  
multiple by 2 mm [ .079 ] spacing  
.151 [ 3.84 ]  
.183 [ 4.65 ]  
.051 [ 1.30 ]  
.079 [ 2.00 ] Typ  
**Optional locator posts:  
Positions per row, multiple by 2mm  
[ .079 ], and then subtract  
4 mm [ .157 ]  
2.042 [5 1.87] 72 mm  
2.121 [53.87]  
2.200 [55.88]  
2.278 [57.86]  
2.357 [59.87]  
72 mm  
72 mm  
88 mm  
88 mm  
.060 [ 1.52 ]  
.079 [ 2.00 ] Typ  
.220  
[ 5.59 ]  
Notes:  
.055 p .003  
[ 1.40 ]  
1.Tape & reel include vacuum pick-up cap for pick ‘n place  
handling equipment.  
.030  
[ 0.76 ]  
2. Parts in tray packaging are supplied without vacuum cap.  
Inch  
[mm]  
**Optional locator holes:  
Positions per row, multiple by  
2mm [ .079 ], and then subtract  
4 mm [ .157 ]  
Tolerance Unless Noted  
.00  
.000  
.0  
Positions per row, subtract 1,  
multiple by 2mm [ .079 ] spacing  
Inch  
± .005  
± .01  
± .1  
[ ] Dimensions for  
Recommended MountingHole Pattern  
Reference only  
**Optional Locator Posts available for positions eight and greater.  
Ordering Information  
1502XX-20X0-XX-XX  
Packaging style:  
Blank = tray packaging  
WX = tape & reel pkg (see Table 1 for  
ordering code)  
Number of Positions  
(see table 1)  
Board Location Post  
0 = None  
(Even No.: 4 - 60)  
Plating suffix:  
RB = 30 μ” [.76 μm] Gold with Matte Tin solder tails (RIA E1 & C1 apply)  
TB = 30 μ” [.76 μm] Gold with Tin-lead solder tails (RIA E3 & C2 apply)  
2 = With Board Location Post  
TS-0519-E  
Sheet 2 of 4  
3M is a trademark of 3M Company.  
For technical, sales or ordering information call  
800-225-5373  
3
Electronic Solutions Division  
Interconnect Solutions  
http://www.3M.com/interconnects/  
3MBoardmount Socket  
2 mm x 2 mm Str. Surface Mount, Str. and R. A. Plated Through-Hole  
1502 Series  
Table 1  
C
Contact  
Dimension A  
Quantity  
04  
06  
08  
10  
12  
14  
16  
18  
20  
22  
24  
26  
28  
30  
32  
34  
36  
38  
40  
42  
44  
46  
48  
50  
52  
54  
56  
58  
60  
0.156 [3.96]  
0.231 [5.87]  
0.310 [7.87]  
0.389 [9.88]  
0.467 [11.86]  
0.546 [13.87]  
0.625 [15.88]  
0.704 [17.88]  
0.782 [19.86]  
0.861 [21.87]  
0.940 [23.88]  
1.019 [25.88]  
1.097 [27.86]  
1.176 [29.87]  
1.255 [31.88]  
1.334 [33.88]  
1.412 [35.86]  
1.491 [37.87]  
1.570 [39.88]  
1.649 [41.88]  
1.727 [43.87]  
1.806 [45.87]  
1.885 [47.88]  
1.964 [49.89]  
2.042 [5 1.87]  
2.121 [53.87]  
2.200 [55.88]  
2.278 [57.86]  
2.357 [59.87]  
“A”  
(See Table 1)  
.043  
[ 1.09 ]  
Mate Point  
Positions per row, subtract 1,  
multiple by 2 mm [ .079 ] spacing  
.151  
[ 3.84 ]  
.177  
[ 4.50 ]  
.028  
[ 0.71 ]  
.008  
[ 0.20 ]  
.020  
[ 0.51 ]  
.079  
[ 2.00 ]  
‘‘B'' ± .010  
.079 [ 2.00 ]  
.028 ± .003  
[ 0.71 ]  
.079  
[ 2.00 ]  
Positions per row, subtract 1 position,  
multiple by 2 mm [ .079 ] spacing  
Recommended Hole Pattern  
Inch  
[mm]  
Tolerance Unless Noted  
.00  
.000  
.0  
Inch  
± .005  
± .01  
± .1  
[ ] Dimensions for  
Reference only  
Ordering Information  
1502XX-600X-XX  
Number of Positions  
(see table 1)  
(Even No.: 4 - 60)  
Solder Tail Length  
Plating suffix:  
Dimension B  
RB = 30 μ” [.76 μm] Gold with Matte Tin solder tails (RIA E1 & C1 apply)  
TB = 30 μ” [.76 μm] Gold with Tin-lead solder tails (RIA E3 & C2 apply)  
1 = .055″ (1.4 mm)  
2 = .100″ (2.54 mm)  
TS-0519-E  
Sheet 3 of 4  
3M is a trademark of 3M Company.  
For technical, sales or ordering information call  
800-225-5373  
3
Electronic Solutions Division  
Interconnect Solutions  
http://www.3M.com/interconnects/  
3MBoardmount Socket  
2 mm x 2 mm Str. Surface Mount, Str. and R. A. Plated Through-Hole  
1502 Series  
Table 1  
C
Contact  
Dimension A  
Quantity  
08  
10  
12  
14  
16  
18  
20  
22  
24  
26  
28  
30  
32  
34  
36  
38  
40  
42  
44  
46  
48  
50  
52  
54  
56  
58  
60  
0.310 [7.87]  
0.389 [9.88]  
0.467 [11.86]  
0.546 [13.87]  
0.625 [15.88]  
0.704 [17.88]  
0.782 [19.86]  
0.861 [21.87]  
0.940 [23.88]  
1.019 [25.88]  
1.097 [27.86]  
1.176 [29.87]  
1.255 [31.88]  
1.334 [33.88]  
1.412 [35.86]  
1.491 [37.87]  
1.570 [39.88]  
1.649 [41.88]  
1.727 [43.87]  
1.806 [45.87]  
1.885 [47.88]  
1.964 [49.89]  
2.042 [5 1.87]  
2.121 [53.87]  
2.200 [55.88]  
2.278 [57.86]  
2.357 [59.87]  
.308  
[ 7.82 ]  
A
.043  
[ 1.09 ]  
Mating Point  
Positions per row, subtract 1,  
multiple by 2 mm [ .079 ] spacing  
B
Standoff  
Height  
D
C
E
.079 Typ  
[ 2.00 ]  
.020  
[ 0.51 ]  
F
.079 Typ  
[ 2.00 ]  
.074  
[ 1.88 ]  
Optional locator posts:  
Positions per row, multiple by 2 mm  
[ .079 ], and then subtract  
4 mm [ .157 ]  
.130  
[ 3.30 ]  
Positions per row, subtract 1,  
multiple by 2mm [ .079 ] spacing  
.028 ±.003  
.079 Typ  
[ 2.00 ]  
[ 0.71 ]  
.079 [ 2.00 ]  
.055 ±.003  
.130 [ 3.30 ]  
[ 1.40 ]  
Optional locator holes:  
Positions per row, multiple by 2mm  
[ .079 ], and then subtract  
4mm [ .157 ]  
Recommended Hole Pattern  
Table 2  
Dimensions  
D
Inch  
[mm]  
Standoff  
Height Code  
B
C
E
F
Tolerance Unless Noted  
0
1
2
.015 [0.38]  
.053 [1.35]  
.028 [0.71]  
.065 [1.65]  
.103 [2.62]  
.078 [1.98]  
.179 [4.55]  
.217 [5.51]  
.192 [4.88]  
.100 [2.54]  
.100 [2.54]  
.125 [3.18]  
.040 [1.02]  
.040 [1.02]  
.015 [0.38]  
.00  
.000  
.0  
Inch  
± .005  
± .01  
± .1  
[ ] Dimensions for  
Reference only  
Ordering Information  
1502XX-5XX2-XX  
Plating suffix:  
Number of Positions  
(see table 1)  
(Even No.: 10 - 60)  
RB = 30 μ” [.76 μm] Gold with Matte Tin solder tails  
(RIA E1 & C1 apply)  
Standoff Height Code  
TB = 30 μ” [.76 μm] Gold with Tin-lead solder tails  
(RIA E3 & C2 apply)  
(see table 2, Dim B)  
0 = .015″ [0.38] (Standard)  
1 = .053″ [1.35]  
2 = .028″ [0.71](Position 40,  
44, and 50 only)  
Board Location Post  
0 = None  
2 = With Board Location Post  
TS-0519-E  
Sheet 4 of 4  
3M is a trademark of 3M Company.  
For technical, sales or ordering information call  
800-225-5373  
3
Electronic Solutions Division  
Interconnect Solutions  
http://www.3M.com/interconnects/  
Regulatory Information Appendix  
3M Electronic Solutions Division/Interconnect  
EUROPE  
Appendix E1: European Union RoHS  
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as  
amended by EU Commission Decision 2005/618/EC.  
This product is RoHS Compliant 2005/95/EC.  
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of  
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless  
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information  
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.  
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and  
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.  
Appendix E2: European Union RoHS  
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as  
amended by EU Commission Decision 2005/618/EC.  
This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is  
compliant by exemption under EU Commission Decision 2005/747/EC.  
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of  
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless  
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information  
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.  
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and  
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.  
Appendix E3: European Union RoHS  
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as  
amended by Commission Decision 2005/618/EC.  
This product contains lead in the solder tail area in excess of the maximum concentration value allowed.  
Unless otherwise stated by 3M in writing, this information represents 3Ms best knowledge and belief based upon information  
provided by third party suppliers to 3M.  
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and  
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.  
Appendix E4: European Union RoHS  
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as  
amended by EU Commission Decision 2005/618/EC, as amended by EU Commission Decision 2005/717/EC, as amended by  
EU Court of Justice Decision 2008/C 116/04  
This product contains decaBDE in the insulating material in excess of the maximum concentration allowed for finished  
products subject to EU RoHS that are placed on the EU market after June 30, 2008.  
Unless otherwise stated by 3M in writing, this information represents 3Ms best knowledge and belief based upon information  
provided by third party suppliers to 3M.  
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and  
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.product Warranty stated below.  
RIA-2217A-E  
Appendix E5: European Union RoHS  
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment, as  
amended by EU Commission Decision 2005/618/EC.  
This product contains lead in excess of the maximum concentration value allowed but is compliant by exemption under  
Item 6 of the Annex to the Directive.  
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of  
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless  
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information  
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.  
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and  
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.  
CHINA  
Appendix C1: China RoHS  
Electronic Industry Standard of the Peoples Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for  
Certain Hazardous Substances in Electronic Information Products.  
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the  
product or part does not contain any of the following substances in excess of the following maximum concentration values in any  
homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated  
diphenyl ethers (excluding decaBDE); or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this  
information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.  
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and  
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.  
Appendix C2: China RoHS  
Electronic Industry Standard of the Peoples Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain  
Hazardous Substances in Electronic Information Products.  
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that  
the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration  
values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or  
polybrominated diphenyl ethers (excluding decaBDE); or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in  
writing, this information represents 3Ms best knowledge and belief based upon information provided by third party suppliers to 3M.  
The numerical reference in the symbol above should not be construed as a representation regarding the products life or an  
extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with  
3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the  
product Warranty stated below.  
RIA-2217A-E  
Appendix C3: China RoHS  
Electronic Industry Standard of the Peoples Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for  
Certain Hazardous Substances in Electronic Information Products.  
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that  
the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration  
values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or  
polybrominated diphenyl ethers (excluding decaBDE); or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in  
writing, this information represents 3Ms best knowledge and belief based upon information provided by third party suppliers to 3M.  
The numerical reference in the symbol above should not be construed as a representation regarding the products life or an  
extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with  
3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the  
product Warranty stated below.  
Important Notice  
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness  
is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated  
with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order  
shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.  
Warranty; Limited Remedy; Limited Liability.  
This product will be free from defects in material and manufacture for a period of 90 days from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING,  
BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty  
period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where  
prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the  
legal theory asserted.  
3
3M Electronics Solutions Division  
6801 River Place Blvd.  
Austin, TX 78726-9000  
U.S.A.  
1-800-225-5373  
www.3m.com/interconnects  
Please recycle. Printed in USA.  
© 3M 2008. All rights reserved.  
RIA-2217A-E  
3M is a trademark of 3M Company.  

相关型号:

SI9130DB

5- and 3.3-V Step-Down Synchronous Converters

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1-E3

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135_11

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9136_11

Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130CG-T1-E3

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130LG-T1-E3

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130_11

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137DB

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137LG

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9122E

500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification Drivers

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY