2334-6211-TB [3M]

34 CONTACT(S), MALE, STRAIGHT TWO PART BOARD CONNECTOR, SOLDER;


型号：	2334-6211-TB
厂家：	3M ELECTRONICS
描述：	34 CONTACT(S), MALE, STRAIGHT TWO PART BOARD CONNECTOR, SOLDER
文件：	总6页 (文件大小：857K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

3M^™Pin Strip Header

.100" and .100" × .100" Straight and RightAngle, Solder Tail

2300 Series

•ꢀ One and two row versions

•ꢀ Straight and right angle versions

•ꢀ Tin lead or gold plating available

•ꢀ Tapered tip does not cut the socket wipe during

insertion, reducing operational failure and repairs

•ꢀ Board retention feature available

•ꢀ Two-row right angle mates with Pak 100 wiremount

sockets anywhere on the board

•ꢀ See Regulatory InformationAppendix (RIA) for

chemical compliance information

Date Modiﬁed: August 4, 2008

TS-0766-B

Sheet 1 of 3

Physical

Insulation:

Material: Glass Filled Thermoplastic

Flammability: UL 94V-0

Color: Black

Contact:

Material: CopperAlloy

Plating:

Underplating:

50 μ" [ 1.27 μm ] Nickel

WipingArea: Tin or Gold (See Ordering Information)

Solder Tails: 100 μ" [ 2.54 μm ] 90/10 Tin Lead

None

Marking:

Electrical

Current Rating:

Insulation Resistance:

Withstanding Voltage:

> 5 × 10⁹Ω at 500V_DC

100V_RMSat Sea Level

Environmental

55°C to +105°C

Temperature Rating:

UL File No.: E68080

3M is a trademark of 3M Company.

For technical, sales or ordering information call

800-225-5373

Electronic Solutions Division

Interconnect Solutions

http://www.3M.com/interconnects/

3M^™Pin Strip Header

.100" and .100" × .100" Straight and RightAngle, Solder Tail

2300 Series

Straight

C ± .015

(See Note 1)

.100

[2.54]

.050

[1.27]

.100

[2.54]

.050

[1.27]

.050

[1.27]

.025 Sq

[0.64]

A ± .010

.100

[2.54]

.120

[3.05]

.200

[5.08]

D ± .015

(See Note 1)

∅ .040 ± .003

[1.02]

∅ .040 ± .003

[1.02]

(See Note 2)

.100 ± .003 Typ

[2.54]

.100 ± .003 Typ

[2.54]

.100 ± .003 Typ

[2.54]

Recommended Mounting Hole Pattern

Inch

[mm]

Tolerance Unless Noted

Notes:

.00

.000

1.“C” = .100" X pin quantity per row.

2.The recommended PCB hole size for the kinked tail positions on the .120" solder tail connector is Ø .040" .002.

Inch

±.1

±.01 ±.005

[ ] Dimensions for Reference Only

The kinked tail positions are the ﬁrst and last position in each row.

Ordering Information

23XX - 6XXX - XX

Plating

Pin Quantity

One Row (02-40)

Two Row (04-80)

TB = 30 µ" Gold (App. E3 & C2 Apply)

TG = 10 µ" Gold (App. E3 & C2 Apply)

TP = Tin-lead (App. E3 & C2 Apply)

Pin Length

(Dim A)

Tail

1 = .230"

2 = .318"

One Row

11 = .120" Solder Tails

Two Row

21 = .120" Solder Tails

TS-0766-B

Sheet 2 of 3

51 = .120" Kinked Solder Tails 81 = .120" Kinked Solder Tails

3M is a trademark of 3M Company.

For technical, sales or ordering information call

800-225-5373

Electronic Solutions Division

Interconnect Solutions

http://www.3M.com/interconnects/

3M^™Pin Strip Header

.100" and .100" × .100" Straight and RightAngle, Solder Tail

2300 Series

Right Angle

.015

.100

[2.54]

(See Note 1)

.120

[3.05]

.100

[2.54]

.050

[1.27]

.100

[2.54]

.050

[1.27]

.071

[1.80]

.025 Sq

[0.64]

.010

.06

[1.5]

.100

[2.54]

.06

[1.5]

.242

[6.14]

.015

(See Note 1)

Ø .040 .003

[1.02]

(See Note 2)

Ø .040 .003

[1.02]

(See Note 2)

.100 .003 Typ

[2.54]

.100 .003 Typ

[2.54]

.100 .003 Typ

[2.54]

[Inch]

Recommended Mounting Hole Pattern

Tolerance Unless Noted

.00

.000

Notes:

1.“C” = .100" X pin quantity per row.

±.1

±.01 ±.005

2.The recommended PCB hole size for the kinked tail positions on the .120" solder tail connector is Ø .040" .002.

[ ] Dimensions for Reference Only

3. Drawing not to scale. Part details may vary.

Ordering Information

23XX - 5XXX - XX

Plating

Pin Quantity

One Row (02-40)

Two Row (04-80)

TB = 30 µ" Gold (App. E3 & C2 Apply)

TG = 10 µ" Gold (App. E3 & C2 Apply)

TP = Tin-lead (App. E3 & C2 Apply)

Pin Length

(Dim A)

Tail

1 = .230"

2 = .318"

One Row

11 = .120" Solder Tails

Two Row

21 = .110" Solder Tails

TS-0766-B

Sheet 3 of 3

51 = .120" Kinked Solder Tails 81 = .110" Kinked Solder Tails

3M is a trademark of 3M Company.

For technical, sales or ordering information call

800-225-5373

Electronic Solutions Division

Interconnect Solutions

http://www.3M.com/interconnects/

Regulatory Information Appendix

3M Electronic Solutions Division/Interconnect

EUROPE

Appendix E1: European Union RoHS

Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as

amended by EU Commission Decision 2005/618/EC.

This product is RoHS Compliant 2005/95/EC.

“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of

the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless

the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information

represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and

Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

Appendix E2: European Union RoHS

Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as

amended by EU Commission Decision 2005/618/EC.

This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is

compliant by exemption under EU Commission Decision 2005/747/EC.

“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of

the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless

the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information

represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and

Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

Appendix E3: European Union RoHS

Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as

amended by Commission Decision 2005/618/EC.

This product contains lead in the solder tail area in excess of the maximum concentration value allowed.

Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information

provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and

Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

Appendix E4: European Union RoHS

Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as

amended by EU Commission Decision 2005/618/EC, as amended by EU Commission Decision 2005/717/EC, as amended by

EU Court of Justice Decision 2008/C 116/04

This product contains decaBDE in the insulating material in excess of the maximum concentration allowed for ﬁnished

products subject to EU RoHS that are placed on the EU market after June 30, 2008.

Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information

provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and

Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

RIA-2217B-E

Appendix E5: European Union RoHS

Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment, as

amended by EU Commission Decision 2005/618/EC.

This product contains lead in excess of the maximum concentration value allowed but is compliant by exemption under

Item 6 of the Annex to the Directive.

“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of

the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless

the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information

represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and

Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

CHINA

Appendix C1: China RoHS

Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for

Certain Hazardous Substances in Electronic Information Products.

This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the

product or part does not contain any of the following substances in excess of the following maximum concentration values in any

homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated

diphenyl ethers (excluding decaBDE); or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this

information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and

Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

Appendix C2: China RoHS

Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for

Certain Hazardous Substances in Electronic Information Products.

This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that

the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration

values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or

polybrominated diphenyl ethers (excluding decaBDE); or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in

writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an

extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with

3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the

product Warranty stated below.

RIA-2217B-E

Appendix C3: China RoHS