3432-2303RB [3M]

40 CONTACT(S), MALE, STRAIGHT TWO PART BOARD CONNECTOR, SOLDER, ROHS COMPLIANT;


型号：	3432-2303RB
厂家：	3M ELECTRONICS
描述：	40 CONTACT(S), MALE, STRAIGHT TWO PART BOARD CONNECTOR, SOLDER, ROHS COMPLIANT
文件：	总8页 (文件大小：1275K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

3M^™Three-Wall Header

.100” × .100” Latch/Ejector, Straight and RightAngle

3000 Series

•ꢀ Military (with 3M’s 3518 or N3518 polarizing key)

and center bump polarization

•ꢀ Low proﬁle

•ꢀ Optional ejector latches

•ꢀ Mounting holes for securing header to board

•ꢀ Three wall shroud provides design ﬂexibility

•ꢀ Solder tail and wrap tail options

•ꢀ Optional polarizing posts available

•ꢀ Optional high temperature insulator suitable for “no

lead” soldering operations

•ꢀ High temperature option is suitable for reﬂow

soldering using “paste in hole” techniques

•ꢀ See Regulatory InformationAppendix for chemical

compliance information

Date Modiﬁed: May 1, 2008

TS-0771-C

Sheet 1 of 5

Physical

Insulator:

Material: Glass Filled Polyester (PBT)

Glass Filled Polyester (PCT) - High Temp Option

Flammability: UL 94V-0

Color: Gray (PBT), Beige (PCT), Black (PCT)

Contact:

Material: CopperAlloy

Plating:

Underplating:

100 μ” [ 2.54 μm ] Nickel - Overall

WipingArea: 30 μ” [ 0.76 μm ] Gold

Solder Tails: 200 μ” [ 5.08 μm ] Tin Lead or Matte Tin (See Ordering Information)

3M Logo, Part Identiﬁcation Number and Orientation Triangle

Marking:

Electrical

2A (EIA 364-70)

Current Rating:

Insulation Resistance:

Withstanding Voltage:

>1 × 10⁹Ω at 500V_DC

1000V_RMSat Sea Level

Environmental

-55°C to +105°C

Temperature Rating:

260°C (High Temp. PCT insulator) single pass (per J-STD-020C)

PBT gray insulator, maximum insulator temperature 191°C (solder

wave process only)

Process Rating:

1 (per J-STD-020C) High Temp. (PCT) versions only

Moisture Sensitivity Level:

UL File No.: E68080

3M is a trademark of 3M Company.

For technical, sales or ordering information call

800-225-5373

Electronic Solutions Division

Interconnect Solutions

http://www.3M.com/interconnects/

3M^™Three-Wall Header

.100” × .100” Latch/Ejector, Straight and RightAngle

3000 Series

-X2XX

-X0XX

Header without Latchs

-X3XX

Header with

Short Ejector/Latch

for 3M Sockets without

Strain Relief

Long Ejector/Latch

for 3M Sockets with

Strain Relief

.08

[2.0]

.08

[2.0]

.573 .010

[ 14.55 ]

.424 .010

[ 10.77 ]

1.07 Ref

[27.2]

.97 Ref

[24.6]

.46 Ref

[11.7]

.37 Ref

[9.4]

.025 .002 Sq Typ

[ 0.64 ]

.24

[6.1]

.020

0.51

.100

2.54

.28

7.1

REF.

.15

3.8

.30

[7.6]

.25

6.4

.31

7.9

.13

3.3

.010

.100

2.54

REF.

2X O .100 [2.54]

SEE NOTE #2

“Y”

POSITION #1

F Typ

Section A-A

Notch A

(See Table 1 & Note1)

(Straight)

Position 1

Orientation

Triangle

Notch B

(See Table 1)

Notch C

.16

.025 .002 Sq

Typ

[ 0.64 ]

.21

[5.3]

(See Table 1 & Note 1)

[4.1]

F Typ

.100 Ref

[2.54]

.24

[6.1]

.68

[17.3]

.12

[3.0]

.30

[7.6]

.35

[8.9]

“Y”

.020

[0.51]

.010

.197

[5.00]

.049

Ref

.20

[5.1]

2X Ø .100

[2.54]

(See Note 2)

Section B-B

(Right Angle)

TS-0771-C

Sheet 2 of 5

3M is a trademark of 3M Company.

For technical, sales or ordering information call

Electronic Solutions Division

Interconnect Solutions

800-225-5373

http://www.3M.com/interconnects/

3M^™Three-Wall Header

.100” × .100” Latch/Ejector, Straight and RightAngle

3000 Series

Table 1

Dimensions

3M Part

Number

Polarizing

Notches

Pin Qty

3793

3314

3408

3428

3429

3431

3432

3433

3372

3764

1.26 (32.1)

1.46 (37.2)

1.56 (39.7)

1.76 (44.8)

2.06 (52.4)

2.46 (62.6)

2.76 (70.2)

3.26 (82.9)

3.76 (95.6)

3.96 (100.7)

1.105 (28.07)

1.305 (33.15)

1.405 (35.69)

1.605 (40.77)

1.905 (48.39)

2.305 (58.55)

2.605 (66.17)

3.105 (78.87)

3.605 (91.57)

3.805 (96.65)

0.865 (21.97)

1.065 (27.05)

1.165 (29.59)

1.365 (34.67)

1.665 (42.29)

2.065 (52.45)

2.365 (60.07)

2.865 (72.77)

3.365 (85.47)

3.565 (90.55)

0.71 (18.0)

0.91 (23.1)

1.01 (25.6)

1.21 (30.7)

1.51 (38.3)

1.91 (48.5)

2.21 (56.1)

2.71 (68.8)

3.21 (81.5)

3.41 (86.6)

ABC

Table 2

Pin Cross Section

Diagonals

3M Part

Number Sufﬁx

Contact Tail

Dimension E

Dimension G

Dimension F

Corner Radii

Solder Tail for

.062 (1.57)

Thick PC Board

-1XX2

-2XX2

.112

(2.84)

.0245 ± .0005

(0.622)

.028 ± .001

(0.71)

.0075 Ref

(0.191)

0.035 ± .003

(0.89) (See Note 3)

Solder Tail for

0.94 (2.39) to .125

(3.18) Thick PC

Board

-1XO3

-2XO3

.155

(3.94)

.0245 ± .0005

(0.622)

.028 ± .001

(0.71)

.0075 Ref

(0.191)

0.035 ± .003 (0.89)

Ø.106 or

[2.69]

Ø.116

[2.95]

Ø.106

[2.69]

Ø.116

[2.95]

.41

(See Note 2)

[10.4]

(See Note 2)

Max to Edge of PCB

for Daisy Chain

.300

[7.62]

G Dim

Side to Side Stackability

G Dim

“Y”

Position 1

.029

[0.74]

Position 1

.100 .003

[2.54]

.060

[1.52]

.100 .003

[2.54]

.100 .003

[2.54]

.232

[5.89]

.352

[8.94]

.100 .003

[2.54]

Recommended Mounting Hole Pattern

(Right Angle)

(Straight)

Inch

(mm)

Tolerance Unless Noted

.00

.000

Inch

± .005

± .01

± .1

Notes:

[ ] Dimensions for

Reference only

1. Notches A & C will accomodate 3M Polarizing Keys (3M Part #3518 or N3518).

2. Accepts Rear and Front mounting hardware:

Rear Entry: #4-24 thread cutting screw, 3M Part #3341-5, .116 [2.95] dia mounting hole

Front Entry: (Prior to installation of latch on Straight Versions) #2-56 bolt and nut, 3M Part #3341-6,

.106 [2.69] dia mounting hole

3. The recommended PCB hole size for the kinked tail positions on the .112 solder tail connector is .035 ± .002.

Kink is located .05” below bottom surface of plastic. External radius of kink toward part centerline

TS-0771-C

Sheet 3 of 5

3M is a trademark of 3M Company.

For technical, sales or ordering information call

Electronic Solutions Division

Interconnect Solutions

800-225-5373

http://www.3M.com/interconnects/

3M^™Three-Wall Header

.100” × .100” Latch/Ejector, Straight and RightAngle

3000 Series

Ordering Information

X3XXX - XXXX XX

Blank = Std. Temp Gray (PBT) /(Blank or UB Pltg. Req’d.)

N = High Temp Beige (PCT) /(Blank or UB Pltg. Req’d.)

N = High Temp Black (PCT)/(RB Plating Req’d)

blank or UB = 30 μ” Gold with Sn/Pb Tails (App. E3 & C2 Apply)

RB = 30 μ” Gold with Matte Tin Tails (App. E1 & C1 Apply)

3M Part Number

(See Table 1)

Tail

02 = Solder Tail for .062 [1.57] Thick Board

K2= Kinked Solder Tails for .062 [1.57] Thick Board

03 = Solder Tails for .094 to .125 [2.39 to 3.18] Thick Board

Shroud and Pin Conﬁguration

1 = 3 Wall, Right Angle Solder Tail

2 = 3 Wall, Straight Solder Tail

Latch/Ejector System

0 = No Latch/Ejector

2 = Short Roll PinLatch/Ejectors

3 = Long Roll Pin Latch/Ejectors

Part Customization

This spec sheet details our standard offering.

3M has several capabilities that can provide a part tailored to

your speciﬁc needs. Ask your 3M sales representative or

customer service for more details.

Kinked Tail (K2 option) positions:

2500 & 3000 Series Shrouded Header

Total Number Number of

Positions

Kinked

Use of snap-in style latch/ejectors in either short (N3XXX

X5XX) or long (N3XXX-X6XX) styles, installed or shipped

separately (the -5 & -6 snap-in latches are dimensional and

functional equivalents to the -2 & -3 roll pin latches) which

are also available separately with roll pins included. Refer to

chart below.

of Pins

Tails Kinked

11 12

13 14

17 18

21 22

23 24

25 26

27 28

33 34

43 44

If ordering snap-in or roll pin style latches separately, please use the below chart

Short Latch Long Latch Latch Style Color

Standard Temperature

(PBT)

3505-2

3505-3

Roll Pin

Snap-In

Gray

High Temperature

(PCT)

N3505-2

N3505-2B

3505-30

N3505-30

N3505-3

N3505-3B

3505-31

N3505-31

Beige

Black

Gray

High Temperature

(PCT)

11 12 49 50

11 12 53 54

High Temperature

(PPA)

High Temperature

(PPA)

Beige

Black

Kinked Tail Detail:

High Temperature

(PPA)

N3505-30B N3505-31B Snap-In

Kink is located .05” below bottom surface of plastic.

External radius of kink toward part centerline.

•ꢀ Selective pin removal (ATA or other compatability)

•ꢀ Wire wrap tails styles

TS-0771-C

Sheet 4 of 5

3M is a trademark of 3M Company.

For technical, sales or ordering information call

800-225-5373

Electronic Solutions Division

Interconnect Solutions

http://www.3M.com/interconnects/

3M^™Three-Wall Header

.100” × .100” Latch/Ejector, Straight and RightAngle

3000 Series

Polarizing Post

3201-3

3201-4

P B T

LC P

G ray

B lac k

.321

[8.15]

.100 Dia

[2.54]

Note: Insert Post into one mounting hardware hole on

bottom of header. Set post to protrude .115” [2.92]

Polarizing Keys

Dim A

.02

N3518

3518

LCP

PBT

Black

Gray

.09

[2.3]

Breakaway Tab

.34 Ref

[8.6]

.15

[3.8]

Note: #2216 B/A Scotchweld can be used to adhere keys.

Mounting Hardware

3341-6

(Must be inserted prior to latch on

vertical headers)

3341-5

(Installed from bottom of board)

.50

[12.7]

.31

[7.9]

Hex Head Bolt, Nut and Wash

Bolt - #2-56 X 1/2”

Panhead Thread Cutting Screw:

#4-24 X 5/16”

Type: USA Std BT, Federal BG

3341-5 & 6

Material - Stainless Steel

TS-0771-C

Sheet 5 of 5

3M is a trademark of 3M Company.

For technical, sales or ordering information call

800-225-5373

Electronic Solutions Division

Interconnect Solutions

http://www.3M.com/interconnects/

Regulatory Information Appendix

3M Electronic Solutions Division/Interconnect

EUROPE

Appendix E1: European Union RoHS

Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as

amended by EU Commission Decision 2005/618/EC.

This product is RoHS Compliant 2005/95/EC.

“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of

the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless

the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information

represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and

Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

Appendix E2: European Union RoHS

Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as

amended by EU Commission Decision 2005/618/EC.

This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is

compliant by exemption under EU Commission Decision 2005/747/EC.

“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of

the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless

the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information

represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and

Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

Appendix E3: European Union RoHS

Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as

amended by Commission Decision 2005/618/EC.

This product contains lead in the solder tail area in excess of the maximum concentration value allowed.

Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information

provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and

Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

Appendix E4: European Union RoHS

Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as

amended by EU Commission Decision 2005/618/EC.

This product contains decaBDE in the insulating material in excess of the maximum concentration value allowed but is

compliant by exemption under EU Commission Decision 2005/717/EC.

“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of

the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless

the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information

represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and

Buyer’s exclusive remedy will be in accordance with the Warranty stated below.product Warranty stated below.

RIA-2217A-D

Appendix E5: European Union RoHS

Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment, as

amended by EU Commission Decision 2005/618/EC.

This product contains lead in excess of the maximum concentration value allowed but is compliant by exemption under

Item 6 of the Annex to the Directive.

“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of

the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless

the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information

represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and

Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

CHINA

Appendix C1: China RoHS

Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for

Certain Hazardous Substances in Electronic Information Products.

This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means

that the product or part does not contain any of the following substances in excess of the following maximum concentration

values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls

or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this

information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and

Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

Appendix C2: China RoHS

Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for

Certain Hazardous Substances in Electronic Information Products.

This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that

the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration

values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls

or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this

information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an

extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with

3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the

product Warranty stated below.

RIA-2217A-D

Appendix C3: China RoHS