3433-5603UB [3M]

50 CONTACT(S), MALE, RIGHT ANGLE TWO PART BOARD CONNECTOR, SOLDER;
3433-5603UB
型号: 3433-5603UB
厂家: 3M ELECTRONICS    3M ELECTRONICS
描述:

50 CONTACT(S), MALE, RIGHT ANGLE TWO PART BOARD CONNECTOR, SOLDER

文件: 总5页 (文件大小:1057K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
3MFour-Wall Header  
.100” × .100” Latch/Ejector, Straight and RightAngle  
3000 Series  
• Military (with 3M’s 3518 & N3518 polarizing key) and  
centerbump polarization  
• Optional ejector latches  
• Mounting holes for securing header to board  
• Optional polarizing posts available  
• High temperature insulator option suitable for “no lead”  
soldering operations  
• High temperature option suitable for reflow soldering  
using “paste in hole” techniques  
• Solder tail option  
• See the Regulatory InformationAppendix (RIA) in the  
“RoHS compliance” section of www.3Mconnector.com  
for compliance information (RIAE1 & C1 apply)  
Date Modified: July 5, 2010  
TS-0772-K  
Sheet 1 of 4  
Physical  
Insulator:  
Material: Glass Filled Polyester (PBT) Glass Filled Polyester (PCT) - (High Temp Option)  
Flammability: UL 94V-0  
Color: Gray (PBT), Black (PCT)  
Contact:  
Material: CopperAlloy  
Plating:  
Underplating:  
Nickel - Overall (See Ordering Information)  
WipingArea: 30 µ” [ 0.76 μm ] Gold  
Solder Tails: Tin Lead or Matte Tin (See Ordering Information)  
3M Logo, Part Identification Number and Orientation Triangle  
Marking:  
Electrical  
2A(EIA364-70)  
Current Rating:  
Insulation Resistance:  
Withstanding Voltage:  
>1 × 109 Ω at 500 VDC  
1,000 VRMS at Sea Level  
Environmental  
-55°C to +105°C  
Temperature Rating:  
260°C - (High Temp PCT insulator verson), single pass, (profile per J-STD-020C)  
(PBT insulator version), maximum insulator temperature 191°C (solder wave  
processonly)  
Process Rating:  
1 (per J-STD-020C) High Temp. (PCT) versions only  
Moisture Sensitivity Level:  
UL File No.: E68080  
3M is a trademark of 3M Company.  
For technical, sales or ordering information call  
800-225-5373  
3
Electronic Solutions Division  
Interconnect Solutions  
http://www.3Mconnector.com  
3MFour-Wall Header  
.100” × .100” Latch/Ejector, Straight and RightAngle  
3000 Series  
-X0XX  
-X3XX  
-X2XX  
Header without Latch Ejector  
Header with  
Header with  
Long Ejector/Latch  
for 3M Sockets with  
Strain Relief  
Short Ejector/Latch  
for 3M Sockets without  
Strain Relief  
.08  
[2.0]  
.08  
[2.0]  
.573 .010  
[ 14.55 ]  
.424 .010  
[ 10.77 ]  
1.07 Ref  
[27.2]  
.97 Ref  
[24.6]  
A
.025 .002 Sq Typ  
[ 0.64 ]  
.37 Ref  
[9.4]  
.46 Ref  
[11.7]  
D
.24  
[6.1]  
.28  
7.1  
.100  
2.54  
REF.  
.020  
0.51  
.30  
[7.6]  
.34  
8.6  
.25  
6.4  
.13  
3.3  
.100  
2.54  
REF.  
2X O .100 [2.54]  
Dim. E  
C
L
SEE NOTE #2  
POSITION #1  
B
“Y”  
F Typ  
Section A-A  
(Straight)  
Notch A  
(See Table 1 & Note1)  
Position 1  
Orientation  
Triangle  
Notch B  
(See Table 1)  
.025 .002 Sq Typ  
[ 0.64 ]  
Notch C  
(See Table 1 & Note 1)  
.16  
[4.1]  
.21  
[5.3]  
A
B
.24  
[6.1]  
F Typ  
.68  
[17.3]  
.12  
[3.0]  
.35  
[8.9]  
.30  
[7.6]  
C
“Y”  
L
.020  
[0.51]  
.197  
[5.00]  
Dim. E  
B
A
.049 Ref  
[1.24]  
.20  
[5.1]  
C
A
2X ø .100  
[2.54]  
(See Note 2)  
.100 Ref  
[2.54]  
Section B-B  
(Right Angle)  
TS-0772-K  
Sheet 2 of 4  
C
3M is a trademark of 3M Company.  
3
For technical, sales or ordering information call  
Electronic Solutions Division  
Interconnect Solutions  
800-225-5373  
http://www.3Mconnector.com  
3MFour-Wall Header  
.100” × .100” Latch/Ejector, Straight and RightAngle  
3000 Series  
Table 1  
Inch  
(mm)  
Dimensions  
3M Part  
Pin Qty  
Polarizing  
Notches  
Tolerance Unless Noted  
Number  
A
B
C
D
.00  
.01  
.000  
.005  
.0  
.1  
10  
14  
16  
20  
24  
26  
30  
34  
40  
50  
60  
64  
3793  
3314  
3408  
3428  
3627  
3429  
3440  
3431  
3432  
3433  
3372  
3764  
1.265 (32.13)  
1.465 (37.21)  
1.565 (39.75)  
1.765 (44.83)  
1.965 (49.91)  
2.065 (52.45)  
2.265 (57.53)  
2.465 (62.61)  
2.765 (70.23)  
3.265 (82.93)  
3.765 (95.63)  
3.965 (100.71)  
1.104 (28.04)  
1.304 (33.12)  
1.404 (35.66)  
1.604 (40.74)  
1.804 (45.82)  
1.904 (48.36)  
2.104 (53.44)  
2.304 (58.52)  
2.604 (66.14)  
3.104 (78.84)  
3.604 (91.54)  
3.804 (96.62)  
0.865 (21.97)  
1.065 (27.05)  
1.165 (29.59)  
1.365 (34.67)  
1.565 (39.75)  
1.665 (42.29)  
1.865 (47.37)  
2.065 (52.45)  
2.365 (60.07)  
2.865 (72.77)  
3.365 (85.47)  
3.565 (90.55)  
0.705 (17.91)  
0.905 (22.99)  
1.005 (25.53)  
1.205 (30.61)  
1.405 (35.69)  
1.505 (38.23)  
1.705 (43.31)  
1.905 (48.39)  
2.205 (56.01)  
2.705 (68.71)  
3.205 (81.41)  
3.405 (86.49)  
BC  
Inch  
BC  
[ ] Dimensions for  
Reference only  
ABC  
ABC  
ABC  
ABC  
ABC  
ABC  
ABC  
ABC  
ABC  
ABC  
Table 2  
3M Part  
Number Suffix  
Contact Tail  
Dim E  
Pin Cross Section  
Dim G  
-5XX2  
Solder Tail for  
.062 (1.57)  
Thick PC Board  
Dim F  
.0245 .0005  
(0.622)  
Diagonals  
.028 .001  
(0.71)  
Corner Radii  
.0075 Ref  
(0.191)  
.112 .010  
(2.84)  
0.035 .003  
(0.89) (See Note 3)  
-6XX2  
-5X03  
Solder Tail for 0.94  
(2.39) to .125 (3.18)  
Thick PC Board  
.155 .010  
(3.94)  
.0245 .0005  
(0.622)  
.028 .001  
(0.71)  
.0075 Ref  
(0.191)  
0.035 .003 (0.89)  
-6X03  
or ø.116  
[2.95]  
ø.106  
[2.69]  
or  
ø.106  
[2.69]  
ø.116  
[2.95]  
.41  
[10.4]  
(See Note 2)  
(See Note 2)  
.300  
[7.62]  
Side to Side Stackability  
Max to Edge of PCB  
for Daisy Chain  
Dim G  
Dim G  
"Y"  
C
L
C
L
“Y”  
Position 1  
.029  
Position 1  
[0.74]  
.060  
[1.52]  
.100 .003  
[2.54]  
.100 .003  
[2.54]  
.100 .003  
[2.54]  
.232  
[5.89]  
.352  
[8.94]  
.100 .003  
[2.54]  
C
B
Recommended Mounting Hole Pattern  
Recommended Mounting Hole Pattern  
(Right Angle)  
(Straight)  
Notes: 1. Notches A & C will accomodate 3M Polarizing Keys (3M Part #3518 or #N3518).  
2. Mounting hardware: From solder side of pc board use #4-24 thread cutting screw (3M Part # 3341-5) and .116 [2.95] dia mounting hole. For right angle version only, #2-56 bolt and nut (3M  
Part # 3341-6) with .106 [2.69] dia mounting hole may be used.  
3.The recommended PCB hole size for the kinked tail positions on the .112 solder tail connector is .035 .002. See page 4 for kink position details (K2 version).  
4. Contact your 3M sales representative for custom requirements.  
X3XXX-XXXXXX  
Plating  
Ordering Information  
RB = 30 μ[ 0.76 μm ] Gold and 200 μ[ 5.08 μm ] MatteTin  
over 100 μ” [ 2.54 μm ] Nickel (App. E1 & C1 Apply)  
Blank or UB = 30 μ” (0.76 μm ] Gold and 200 μ” [ 5.08 μm ]  
N = HighTemp Black (PCT)/(RB Plating Req’d)  
Blank = Std.Temp Gray (PBT) /(Blank or UB Pltg. Req’d.)  
Tin Lead over 100 μ” [ 2.54 μm ] Nickel (App. E3 & C2 Apply)  
3M Part Number  
(See Table 1)  
Latch/Ejector System  
Tail  
0 = No Latch/Ejector installed  
2 = Short Roll Pin Latch/Ejectors  
3 = Long Roll Pin Latch/Ejectors  
5 = Short, Snap-In Latch/Ejectors  
6 = Long, Snap-In Latch/Ejectors  
02 = for .062 [1.57] thick board  
03 = for .094 to .125 [2.39 to 3.18] thick board  
K2 = kinked for .062 [1.57] thick board  
Pin Configuration  
5 = Right Angle Solder Tails  
6 = Straight SolderTails  
TS-0772-K  
Sheet 3 of 4  
3M is a trademark of 3M Company.  
For technical, sales or ordering information call  
800-225-5373  
3
Electronic Solutions Division  
Interconnect Solutions  
http://www.3Mconnector.com  
3MFour-Wall Header  
.100” × .100” Latch/Ejector, Straight and RightAngle  
3000 Series  
Part Customization  
Polarizing Post  
This spec sheet details our standard offering.  
3M has several capabilities that can provide a part tailored  
to your specific needs. Ask your 3M sales representative  
or customer service for more details.  
.318  
[8.08]  
3201-4  
3201-5  
LCP  
PBT  
Black  
Gray  
.100 Dia  
[2.54]  
Note: Insert Post into one mounting hardware hole on bottom of header. Set  
post to protrude .115” [2.92].  
Both snap in and roll pin latches may be ordered sepa-  
rately. Snap in and roll style latches are dimensionally and  
functionally equivalent. If ordering snap-in or roll pin style  
latches separately, please use the below chart.  
2500 & 3000 Series Shrouded Header  
Total Number  
of Pins  
Number of  
Positions Kinked  
Tails Kinked  
Short  
Latch  
Long  
Latch  
Latch  
Style  
Color  
Gray  
10  
14  
16  
20  
24  
26  
30  
34  
36  
40  
50  
60  
64  
4
4
4
4
4
4
4
4
4
4
4
4
4
3
3
4
4
7
8
Standard Temperature  
(PBT)  
3505-2  
3505-3  
Roll Pin  
Roll Pin  
Snap-In  
11  
13  
17  
21  
23  
25  
27  
27  
33  
43  
49  
53  
12  
14  
18  
22  
24  
26  
28  
28  
34  
44  
50  
54  
3
4
High Temperature  
(PCT)  
N3505-2B  
N3505-3B  
Black  
3
4
HighTemperature (PBT) 3505-30  
3505-31  
Gray  
3
4
High Temperature (PPA) N3505-30B N3505-31B Snap-In  
Black  
3
4
5
6
• Selective pin removal (ATAor other compatability)  
• Wire wrap tails styles  
7
8
7
8
7
8
7
8
11  
11  
12  
12  
Kinked Tail Detail:  
Kink is located .05” below bottom surface of plastic.  
External radius of kink toward part centerline.  
Mounting Hardware  
Polarizing Keys  
3341-6  
(Must be inserted prior to latch on  
3341-5  
Dim A  
.02  
vertical headers)  
(Installed from bottom of board)  
N3518  
3518  
LCP  
PBT  
Black  
Gray  
.02  
.50  
[12.7]  
.31  
[7.9]  
.09  
[2.3]  
Panhead Thread Cutting Screw:  
#4-24 X 5/16”  
Type: USA Std BT, Federal BG  
Hex Head Bolt, Nut and Washer  
Bolt - #2-56 X 1/2”  
Breakaway Tab  
.34 Ref  
[8.6]  
A
.15  
[3.8]  
3341-5 & 6  
Material - Stainless Steel  
Note: #2216 B/A Scotchweld can be used to adhere keys.  
TS-0772-K  
Sheet 4 of 4  
3M is a trademark of 3M Company.  
For technical, sales or ordering information call  
800-225-5373  
3
Electronic Solutions Division  
Interconnect Solutions  
http://www.3Mconnector.com  
Important Notice  
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness  
is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated  
with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order  
shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.  
Warranty; Limited Remedy; Limited Liability.  
This product will be free from defects in material and manufacture for a period of ninety (90) days from the time of purchase. 3M MAKES NO OTHER WARRANTIES  
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the  
warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except  
where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of  
the legal theory asserted.  
3M Electronics Solutions Division  
6801 River Place Blvd.  
Austin, TX 78726-9000  
U.S.A.  
1-800-225-5373  
www.3Mconnector.com  
Please recycle. Printed in USA.  
© 3M 2010. All rights reserved.  
RIA-2217B-E  
3M is a trademark of 3M Company.  

相关型号:

SI9130DB

5- and 3.3-V Step-Down Synchronous Converters

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1-E3

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135_11

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9136_11

Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130CG-T1-E3

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130LG-T1-E3

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130_11

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137DB

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137LG

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9122E

500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification Drivers

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY