3440-D02UB [3M]

TWO PART BOARD CONNECTOR;


型号：	3440-D02UB
厂家：	3M ELECTRONICS
描述：	TWO PART BOARD CONNECTOR 连接器
文件：	总5页 (文件大小：884K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

3M^™Three-Wall Condo Header

.100 × .100 RightAngle

3000 Series

•ꢀ Stacked pins conserve space on the circuit board allowing

higher density packaging

•ꢀ Pin quantity to 128 gives design ﬂexibility with latching

•ꢀ “HDI’’alternative

•ꢀ Three-wall ﬁts inVME board stacking criteria

•ꢀ Accepts standard IDC sockets

•ꢀ Mates with standard ﬂat cable harnesses

•ꢀ Optional high temperature insulator suitable for “no lead”

soldering operations

•ꢀ High temperature option suitable for reﬂow soldering using

“paste in hole” techniques

•ꢀ RoHS Compliant. See the Regulatory Information

Appendix (RIA) in the “RoHS compliance” section of

www.3Mconnectors.com for compliance information

(RIA E1 & C1 apply)

Date Modiﬁed: May 21, 2012

TS-0773-F

Sheet 1 of 3

Physical

Insulation:

Material: Glass Filled Polyester (PBT), Glass Filled Polyester (PCT) - High Temp Option

Flammability: UL 94V-0

Color: Gray (PBT), Black (PCT)

Contact:

Material: CopperAlloy

Plating:

Underplating:

100 μ” [ 2.54 μm ] Nickel - Overall

WipingArea: 30 μ” [ 0.76 μm ] Gold

Solder Tails: 200 μ” [ 5.08 μm ] Tin Lead or Matte Tin (See Ordering Information)

3M Logo, Part Identiﬁcation Number and Orientation Triangle

Marking:

Electrical

2A (EIA 364-70)

Current Rating:

Insulation Resistance:

Withstanding Voltage:

>1 × 10⁹Ω at 500V_DC

1,000V_RMSat Sea Level

Environmental

-55°C to +105°C

Temperature Rating:

260°C (High Temp. PCT insulator) single pass (per J-STD-020C)

PBT gray insulator, maximum insulator temperature 191°C (solder

wave process only)

Process Rating:

1 (per J-STD-020C) High Temp. (PCT) versions only

Moisture Sensitivity Level:

UL File No.: E68080

3M is a trademark of 3M Company.

For technical, sales or ordering information call

Electronic Solutions Division

Interconnect Solutions

800-225-5373

http://www.3Mconnectors.com

3M^™Three-Wall Condo Header

.100 × .100 RightAngle

3000 Series

-D00X

Header without Latch

Ejector

-D20X

-D30X

Header with Short Ejector/Latch for

3M Sockets without Strain Relief

Header with Long Ejector/Latch for

3M Sockets with Strain Relief

.08 [2.0]

.573 ± .010

[14.55]

.424 ± .010

[10.77]

1.28 Ref

[32.5]

1.18 Ref [30.0]

.46 Ref

[11.7]

.37 Ref [9.4]

.100

2.54

REF.

.28

7.1

.020

0.51

.590

14.99

.100

2.54

POSITION #1

REF.

.100

2.54

REF.

Position 1

Orientation

Triangle

Notch B

(See Table 1)

Notch A

(See Table 1 & Note 1)

Notch C

(See Table 1 & Note 1)

.020 [0.51]

.24 [6.1]

.16 [4.1]

.025 Sq Typ

[0.64]

.89

[22.61]

.51

[13.0]

.100 [2.54]

REF.

.20 [5.1]

.112 ± .01

[2.84]

.035 [0.89]

2Xø.100

[2.54]

TS-0773-F

Sheet 2 of 4

3M is a trademark of 3M Company.

For technical, sales or ordering information call

Electronic Solutions Division

Interconnect Solutions

800-225-5373

http://www.3Mconnectors.com

3M^™Three-Wall Condo Header

.100 × .100 RightAngle

3000 Series

Table 1

Dimensions

3M Part

Polarizing

Notches

Quantity Number

3793

3314

3408

3428

3627

3429

3440

3431

3432

3433

3372

3764

1.26 (32.1)

1.46 (37.2)

1.56 (39.7)

1.76 (44.8)

1.96 (49.8)

2.06 (52.4)

2.26 (57.4)

2.46 (62.6)

2.76 (70.2)

3.26 (82.9)

3.76 (95.6)

3.96 (100.7)

0.865 (21.97)

1.065 (27.05)

1.165 (29.59)

1.365 (34.67)

1.565 (39.75)

1.665 (42.29)

1.865 (47.37)

2.065 (52.45)

2.365 (60.07)

2.865 (72.77)

3.365 (85.47)

3.565 (90.55)

0.71 (18.0)

0.91 (23.1)

1.01 (25.6)

1.21 (30.7)

1.41 (35.8)

1.51 (38.3)

1.71 (43.4)

1.91 (48.5)

2.21 (56.1)

2.71 (68.8)

3.21 (81.5)

3.41 (86.6)

ABC

100

120

128

.232

[5.89]

.029 Typ

[0.74]

ø.040 .003

[ 1.02 ]

(After Plating)

ø.100Typ

[2.54]

.100 Typ

[2.54]

Position 1

.100 Typ

[2.54]

Recommended Hole Pattern

Notes:

1. Notches A & C will accomodate 3M Polarizing Key (3M Part Number 3518 or N3518).

2. 112 [2.84] tail length suitable for .062 [1.57] thick pc board.

3. Contact your 3M sales representative for custom requirements.

4. Use of snap-in style latch/ejectors in either short (X3XXX-D502XX) or X3XXX-D602XX) styles, installed or shipped

separately (-5 & -6 snap-in latches are dimensionally and functionally equivalent to -2 & -3 roll pin latches)

5. Mounting hardware: From solder side of pc board use #4-*24 thread cutting screw (3M Part 3341-5) and .116 dia. mounting hole. See Illustrations on

page 4.

Inch

(mm)

If ordering Snap-In style latches separately, please use the below chart

Tolerance Unless Noted

.00

.000

Short Latch

3505-30

Long Latch

3505-31

Color

Gray

± .005

± .01

Inch

± .1

High Temp (PBT)

High Temp (PPA)

[ ] Dimensions for

Reference only

N3505-30B

N3505-31B

Black

Ordering Information

X3XXX - DX02XX

RB = 30μ” [0.76μm] Gold with Matte Tin Tails (App. E1 & C1 Apply)

Blank or UB = 30μ” [0.76μm] Gold with Tin Lead Tails (App. E3 & C2

Apply)

N = High Temp Black (PCT) (RB Plating Req’d)

Blank = Std. Temp Gray (PBT) (Blank or UB Pltg. Req’d.)

Latch/Ejector System

0 = No Latch/Ejector Installed

2 = Short, Roll Pin Latch/Ejectors

3 = Long, Roll Pin Latch/Ejectors

3M Part Number

TS-0773-F

Sheet 3 of 4

3M is a trademark of 3M Company.

For technical, sales or ordering information call

Electronic Solutions Division

Interconnect Solutions

800-225-5373

http://www.3Mconnectors.com

3M^™Three-Wall Condo Header

.100 × .100 RightAngle

3000 Series

Polarizing Post

3201-3

3201-4

P B T

LC P

G ray

B lac k

.321

[8.15]

.100 Dia

[2.54]

Note: Insert Post into one mounting hardware hole on

bottom of header. Set post to protrude .115” [2.92]

Polarizing Keys

Dim A

.02

N3518

3518

LCP

PBT

Black

Gray

.09

[2.3]

Breakaway Tab

.34 Ref

[8.6]

.15

[3.8]

Note: #2216 B/A Scotchweld can be used to adhere keys.

Mounting Hardware

3341-6

(Must be inserted prior to latch on

vertical headers)

3341-5

(Installed from bottom of board)

.50

[12.7]

.31

[7.9]

Hex Head Bolt, Nut and Wash

Bolt - #2-56 X 1/2”

Panhead Thread Cutting Screw:

#4-24 X 5/16”

Type: USA Std BT, Federal BG

3341-5 & 6

Material - Stainless Steel

TS-0773-F

Sheet 4 of 4

3M is a trademark of 3M Company.

For technical, sales or ordering information call

800-225-5373

Electronic Solutions Division

Interconnect Solutions

http://www.3Mconnectors.com

3M is a trademark of 3M Company.

Important Notice

All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness

is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated

with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order

shall have no force or effect unless expressly agreed upon, in writing, by an authorized ofﬁcer of 3M.

Warranty; Limited Remedy; Limited Liability.

This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3M MAKES NO OTHER WARRANTIES

INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the

warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except

where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of

the legal theory asserted.

3M Electronics Solutions Division

6801 River Place Blvd.

Austin, TX 78726-9000

U.S.A.

1-800-225-5373

www.3Mconnectors.com

Please recycle. Printed in USA.

RIA-2217B-E

相关型号：