37304-A206-00E-MB [3M]

4 CONTACT(S), FEMALE, TWO PART BOARD CONNECTOR, IDC, SOCKET;


型号：	37304-A206-00E-MB
厂家：	3M ELECTRONICS
描述：	4 CONTACT(S), FEMALE, TWO PART BOARD CONNECTOR, IDC, SOCKET 连接器
文件：	总7页 (文件大小：404K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

3M™ Mini-Clamp II Socket

Designed for Wiring Supplied from Europe and North America

2 mm, IDC, Wiremount, Optional Latch

373 Series

•

Designed to accommodate typical wiring specifications

per Europe and North America suppliers.

Easy, quick and reliable IDC termination

Integrated cable retention

Design accepts multiple wire size diameter

No special tooling needed

Latch helps enable rugged field termination

Compact design saves board space

High number of mating cycles

•

RoHS compliant as declared in Regulatory

Information Appendix notes E1 & C1

TS–2234-D

Sheet 1 of 4

Date Modified:3/10/2008

Physical

Insulation

Material: Glass Reinforced Thermoplastic Body & Lower Cover, Transparent Thermoplastic Cover

Flammability: UL 94V-0

Color: Black Body, Cover – White & Color (see Table 1)

Contact

Material: Copper Alloy

Plating

Underplating: 1.27-2.54 μm [50-100 μ”] Nickel

Wiping Area: 0.2 μm [8 μ”] Minimum Gold with Lubricant

IDC: 2.0-7.62 μm [80-300 μ”] Matte Tin

Wire Accomodation: Copper Alloy, 7-19 Bare and Tinned Strands, 0.14-0.50 mm ², 20-26 AWG

Wire Insulation: Flexible Vinyl, Semi-Flexible Vinyl, Polyethylene, X-Linked Polyethylene, or PTFE

For approved cables contact your local sales representative

Marking: 3M Logo, Position Indicator, Wire gauge, Insulator Material

Electrical

Current Rating: 3.0 Amps

Voltage Rating: 32 Volts

Insulation Resistance: >1x10⁶Ω at 600 V_DC

Withstanding Voltage: 1000 V_RMSat Sea Level

Environmental

Temperature Ratings: -20^oC to 85^oC

UL File No: E68080

3M and Scotchlok are trademarks of 3M Company.

For technical, sales or ordering information

call your local sales representative

Interconnect Solutions

http://www.3M.com/interconnects/

3M™ Mini-Clamp II Socket

Designed for Wiring Supplied from Europe and North America

2mm, IDC, Wiremount, Optional Latch

373 Series

# Positions

Dim A

13.8 [.54]

15.8 [.62]

No Latch

Table 1

Wire OD

1.6 ~ 2.0

[.063~.079]

1.2 ~ 1.6

[.047~.063]

1.0 ~ 1.2

[.039~.047]

0.8 ~ 1.0

[.031~.039]

[inch]

Part #

0.25-0.50 mm ²

20-24 AWG

Cover Color

Part #

A206

Gray

A165

Blue

A124

Green

B122

Tolerance Unless

Noted

.00

mm ±.1 ±.10

0.14-0.25 mm ²

24-26 AWG

Cover Color

B163

B101

Red

[ ] Dimensions for

Reference Only

Orange

Yellow

Ordering Information

373XX-XXXX-00E-MB

Wire AWG & OD:

AXXX = 0.25-0.50 mm ²

20-24 AWG

Positions

03 or 04

BXXX = 0.14-0.25 mm ²

24-26 AWG

Wire OD – see Table 1

TS-2234-D

Sheet 2 of 4

Note: Terminate using common pliers or 3M ^TMScotchlok ^TMCrimping Tools E-9BM or E-9E

3M and Scotchlok are trademarks of 3M Company.

For technical, sales or ordering information

call your local sales representative

Interconnect Solutions

http://www.3M.com/interconnects/

3M™ Mini-Clamp II Socket

Designed for Wiring Supplied from Europe and North America

2mm, IDC, Wiremount, Optional Latch

373 Series

# Positions

Dim A

23.4 [.92]

25.4 [1.0]

With Latch

Notes: Latch version for panel mounting

See page 4 for panel cutout

See „No Latch“ for other dimensions

Table 2

1.2 ~ 1.6

[.047~.063]

Wire OD

1.6 ~ 2.0

[.063~.079]

1.0 ~ 1.2

[.039~.047]

0.8 ~ 1.0

[.031~.039]

[inch]

Part #

0.25-0.50 mm ²

20-24 AWG

Cover Color

Part #

A206

Gray

A165

A124

Green

B122

Tolerance Unless

Noted

Blue

.00

mm ±.1 ±.10

0.14-0.25 mm ²

24-26 AWG

Cover Color

B163

B101

Red

[ ] Dimensions for

Reference Only

Orange

Yellow

Ordering Information

373XX-XXXX-0PE-MB

Wire AWG & OD:

AXXX = 0.25-0.50 mm ²

20-24 AWG

Positions

03 or 04

BXXX = 0.14-0.25 mm ²

24-26 AWG

Wire OD – see Table 2

TS-2234-D

Note: Terminate using common pliers or 3M ^TMScotchlok ^TMCrimping Tools E-9BM or E-9E

Sheet 3 of 4

3M and Scotchlok are trademarks of 3M Company.

For technical, sales or ordering information

call your local sales representative

Interconnect Solutions

http://www.3M.com/interconnects/

3M™ Mini-Clamp II Socket

Designed for Wiring Supplied from Europe and North America

2mm, IDC, Wiremount, Optional Latch

373 Series

TS-2234-D

Sheet 4 of 4

3M and Scotchlok are trademarks of 3M Company.

For technical, sales or ordering information

call your local sales representative

Interconnect Solutions

http://www.3M.com/interconnects/

Regulatory Information Appendix

3M Electronic Solutions Division/Interconnect

EUROPE

Appendix E1: European Union RoHS

Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as

amended by EU Commission Decision 2005/618/EC.

This product is RoHS Compliant 2005/95/EC.

“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of

the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless

the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information

represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and

Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

Appendix E2: European Union RoHS

Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as

amended by EU Commission Decision 2005/618/EC.

This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is

compliant by exemption under EU Commission Decision 2005/747/EC.

“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of

the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless

the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information

represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and

Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

Appendix E3: European Union RoHS

Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as

amended by Commission Decision 2005/618/EC.

This product contains lead in the solder tail area in excess of the maximum concentration value allowed.

Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information

provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and

Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

Appendix E4: European Union RoHS

Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as

amended by EU Commission Decision 2005/618/EC.

This product contains decaBDE in the insulating material in excess of the maximum concentration value allowed but is

compliant by exemption under EU Commission Decision 2005/717/EC.

“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of

the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless

the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information

represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and

Buyer’s exclusive remedy will be in accordance with the Warranty stated below.product Warranty stated below.

RIA-2217A-D

Appendix E5: European Union RoHS

Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment, as

amended by EU Commission Decision 2005/618/EC.

This product contains lead in excess of the maximum concentration value allowed but is compliant by exemption under

Item 6 of the Annex to the Directive.

“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of

the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless

the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information

represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and

Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

CHINA

Appendix C1: China RoHS

Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for

Certain Hazardous Substances in Electronic Information Products.

This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means

that the product or part does not contain any of the following substances in excess of the following maximum concentration

values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls

or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this

information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and

Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

Appendix C2: China RoHS

Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for

Certain Hazardous Substances in Electronic Information Products.

This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that

the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration

values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls

or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this

information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an

extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with

3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the

product Warranty stated below.

RIA-2217A-D

Appendix C3: China RoHS