81040-660403 [3M]
40 CONTACT(S), MALE, STRAIGHT TWO PART BOARD CONNECTOR, SOLDER;
| 型号： | 81040-660403 |
| 厂家： | 
3M ELECTRONICS |
| 描述： | 40 CONTACT(S), MALE, STRAIGHT TWO PART BOARD CONNECTOR, SOLDER |
| 文件： | 总8页 (文件大小：1616K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
3M™ 4-Wall, Tripolarized Header
.050" × .100" Latch/Ejector, PTH & SMT Straight, PTH RightAngle
810 Series
• Tripolarized for robust alignment when mating to 820
series socket
• 50 mil × 100 mil halves the connector length vs. traditional
100 mil x 100 mil products
• Latching Ejector for rugged high performance applications
• Available for through hole or surfacemount attachment
• High temperature plastic for lead free surfacemount or
Paste-in-Hole soldering methods
• Four-wall shroud provides contact protection
• Contacts: 20, 26, 36, 40, 50, 60, 68, 80 and 100
• See the Regulatory InformationAppendix (RIA)
in the “RoHS compliance” section of
www.3Mconnectors.com for compliance information
Date Modified:April 2, 2013
TS-0253-K
Sheet 1 of 7
Physical
Insulation:
Material: High Temperature Plastic (LCP)
Flammability: UL 94V-0
Color: Black
Contact:
Material: CopperAlloy
Plating:
Underplating: 100 µ" [2.54 mm] Nickel
WipingArea: 30 µ" [0.76 mm] Gold
Solder Tails: Matte Tin or Tin Lead (See Ordering Information)
3M Logo, Part Number and Orientation Triangle
Marking:
Mating Compatibility: 820 Series (TS-0254)
Electrical
3.00A, 1 Contact Powered
2.00A, 4 Contacts Powered
0.75A, All Contacts powered
Current Rating:
Rating Conditions: EIA-364-070 Method 2, 30 degrees C maximum temperature
rise, 20% derated. Reference appropriate 3M Product Specification for detailed
current derating curves.
> 1 × 109 Ω at 500 VDC
Insulation Resistance:
Withstanding Voltage:
500 VRMS at Sea Level
Environmental
-55°C to +105°C
Temperature Rating:
Maximum 260°C (Profile per J-STD-020C)
1 (per J-STD-020C)
Process Rating:
Moisture Sensitivity Level:
UL File No.: E68080
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnectors.com
3M™ 4-Wall, Tripolarized Header
.050" × .100" Latch/Ejector, PTH & SMT Straight, PTH RightAngle
810 Series
Table 1
Dimensions
Inch
[Imm]
C
Contact
Quantity
Tolerance Unless Noted
D Short
(Ref.)
D Long
(Ref.)
A
B
C
.0
.00
.000
Inch
±.1
±.01
±.005
1.060
[26.92]
0.722
[18.34]
0.500
[12.70]
1.671
[42.44]
1.842
[46.79]
020
026
036
040
050
060
068
080
100
[ ] Dimensions for Reference Only
1.210
[30.73]
0.872
[22.15]
0.650
[16.51]
1.821
[46.25]
1.992
[50.60]
1.460
[37.08]
1.122
[28.50]
0.900
[22.86]
2.071
[52.60]
2.242
[56.95]
A
B
C
1.560
[39.62]
1.222
[31.04]
1.000
[25.40]
2.171
[55.14]
2.342
[59.49]
1.810
[45.97]
1.472
[37.39]
1.250
[31.75]
2.421
[61.49]
2.592
[65.84]
.015 X .015
[0.38] X [0.38]
2.060
[52.32]
1.722
[43.74]
1.500
[38.10]
2.671
[67.84]
2.842
[72.19]
2X .092
[2.34]
See Note 1
2.260
[57.40]
1.922
[48.82]
1.700
[43.18]
2.871
[72.92]
3.042
[77.27]
Position 2
2.560
[65.02]
2.222
[56.44]
2.000
[50.80]
3.171
[80.54]
3.342
[84.89]
3.060
[77.72]
2.722
[69.14]
2.500
[63.50]
3.671
[93.24]
3.842
[97.59]
.310
[7.87]
Position 1
.100 Ref
[2.54]
.015 X .015
[0.38] X [0.38]
Table 2
.050 Typ
[1.27]
PCB Thickness
.062 [1.57]
.094 [2.39]
.125 [3.18]
"F" Solder Tail Length ± .010
.090 [2.29]
.112 [2.84]
.143 [3.63]
D
Long Latch
Short Latch
.440 .010
[11.18]
.165 .010
[ 4.19 ]
2X Ø.116
[2.95]
.105
[2.67]
.828 Ref
[ 21.03 ]
.160 Ref
[4.06]
.265
.620 Ref
[ 15.75 ]
.405
[10.29]
[6.73]
.306 Ref
[7.77]
.140 .010
[3.56]
.015
[0.38]
Position 1
Orientation Triangle
Notes:
1.This polarization bump does not exist on the 20 position header.
2. Recommended to be mated to the .050" X .100" Wiremount Socket 820 Series.
“F” (See Table 2)
Ordering Information
PTH Right Angle Header
81XXX - 5X0X03 - XX
Ejector Latches
Plating suffix:
blank = 125 µ" tin lead tails (RIA E3 & C2 apply)
RB = 250 µ" matte tin tails (RIA E1 & C1 apply)
(If Ordered Separately)
Contact Quantity
(See Table 1)
Long Latches
3505-28B (black)
Contact Tail:
Short Latches
2 = Solder Tail for .062 [ 1.57 ] PC Board (Standard)
3 = Solder Tail for .094 [ 2.39 ] PC Board (Special Order)
4 = Solder Tail for .125 [ .318 ] PC Board (Special Order)
Ejector/Latch System:
3505-29B (black)
0 = None (Special Order)
5 = With Short Ejectors Installed (Special Order)
6 = With Long Ejector Latches Installed (Standard)
TS-0253-K
Sheet 2 of 7
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnectors.com
3M™ 4-Wall, Tripolarized Header
.050" × .100" Latch/Ejector, PTH & SMT Straight, PTH RightAngle
810 Series
.050 ± .002
[1.27]
Ø.024 ± .003 Typ
[0.64]
Table 3
Ejector Latches
None
Dimension E Min
.575 [14.61]
1.010 [25.65]
.885 [22.48]
*Solder Thief Solder Pads
(See Note 2)
Long
.100 ± .002
[2.54]
Short
.045 - .060
[1.14] - [1.52]
.025 - .035
[0.64] - [0.89]
*Solder Thief Solder Pads required only on Solder side of PC Board.
View A
E
C ± .002
.025 ± .002
[0.64]
.050 ± .002 Typ
[1.27]
Tolerance Noncumulative
.355 Max
[9.02]
.305 Min
[7.75]
Position 2
Flow Solder
Direction
View A
Position 1
.100 ± .002
[2.54]
2X Ø .109 ± .002
Ø.024 ± .003 Typ
[0.64]
[2.77]
.160 ± .002
[4.06]
Recommended Mounting Hole Pattern
PTH Right Angle Header
(shown for mounting side of PC Baord)
Notes:
1. Recommended to process PC Boards through the solder bath such that the connector enters end first (two solder tails at a time).
This will help prevent solder bridging.
2.A Dummy or Solder Thief Solder Pad at the end of each row is recommended on the bottom or solder side of the PC
Board in order to help prevent solder bridging on the end solder tails.The solder thiefs are only required on the end of the rows which leave the
solder bath last.
3. In order to facilitate soldering it is recommended that ejector latches be installed after the soldering process.
TS-0253-K
Sheet 3 of 7
3M is a trademark of 3M Company.
3
For technical, sales or ordering information call
Electronic Solutions Division
Interconnect Solutions
800-225-5373
http://www.3Mconnectors.com
3M™ 4-Wall, Tripolarized Header
.050" × .100" Latch/Ejector, PTH & SMT Straight, PTH RightAngle
810 Series
Table 4
Dimensions
Contact
Quantity
A
B
C Short (Ref.)
1.671 [42.44]
1.821 [46.25]
2.071 [2.60]
C Long (Ref.)
1.842 [46.79]
1.992 [50.60]
2.242 [56.95]
2.342 [59.49]
2.592 [65.84]
2.842 [72.19]
3.042 [77.27]
3.342 [84.89]
3.842 [97.59]
D
C
1.060 [26.92]
1.210 [30.73]
1.460 [37.08]
1.560 [39.62]
1.810 [45.97]
2.060 [52.32]
2.260 [57.40]
2.560 [65.02]
3.060 [77.72]
0.722 [18.34]
0.872 [22.15]
1.122 [28.50]
1.222 [31.04]
1.472 [37.39]
1.722 [43.74]
1.922 [48.82]
2.222 [56.44]
2.722 [69.14]
020
026
036
040
050
060
068
080
100
0.860 [21.84]
1.010 [25.65]
1.260 [32.00]
1.360 [34.54]
1.610 [40.89]
1.860 [47.24]
2.060 [52.32]
2.360 [59.94]
2.860 [72.64]
2.171 [55.14]
2.421 [61.49]
2.671 [67.84]
2.871 [72.92]
3.171 [80.54]
3.671 [93.24]
A
B
Table 5
PCB Thickness
"F" Solder Tail Length .010
.092 [2.34]
.310
[7.87]
.062 [1.57]
.094 [2.39]
See Note 1
.110 [2.79]
Position 2
Position 1
.100 Ref
[2.54]
.015 X .015
[ 0.38 ] X [ 0.38 ]
.050 Typ
[1.27]
.265 [6.73]
.05 Ref
Contact
Mating
Point
.140 ±
.165
4.18
.010
.010
.440
.010
11.17
“F”
(See Table 2)
.828 Ref
21.03
.100
[2.54]
.620 Ref
15.75
.405
10.29
2X .092
2.34
.015
.38
.015 X.015
[0.38 X 0.38]
2XØ
.116
2,95
Notes:
Optional Press
ꢀt post mount
alignment feature
Position 1 Orientation Triangle
1.This polarization bump does not exist
on the 20 position header.
D
2. Recommended to be mated to the
.050" x .100" 820 Series Socket.
Ordering Information
PTH Straight Header
81XXX - 6X0X0X - XX
Ejector Latches
Plating suffix:
blank = 125 µ" tin lead tails (RIA E3 & C2 apply)
RB = 250 µ" matte tin tails (RIA E1 & C1 apply)
Contact Quantity
(See Table 4)
(If Ordered Separately)
Long Latches
3505-28B (black)
Board Mounting Options:
1 = None (Special Order)
3 = Press fit posts both ends (Standard)
Short Latches
Ejector/Latch System:
3505-29B (black)
0 = None (Special Order)
Contact Tail:
5 = With Short Ejectors Installed (Special Order)
6 = With Long Ejector Latches Installed (Standard)
2 = Solder Tail for .062 [ 1.57 ] PC Board (Standard)
3 = Solder Tail for .094 [ 2.39 ] PC Board (Special Order)
4 = Solder Tail for .125 [ .318 ] PC Board (Special Order)
TS-0253-K
Sheet 4 of 7
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnectors.com
3M™ 4-Wall, Tripolarized Header
.050" × .100" Latch/Ejector, PTH & SMT Straight, PTH RightAngle
810 Series
Table 6
.050 ± .002
[1.27]
∅.025 ± .003
[0.64]
Ejector/Latches
None
Dimension E (Min)
.215 [5.46]
Long
.650 [16.51]
.525 [13.34]
.100 ± .002
[2.54]
*Solder Thief
Solder Pads
(See Note2)
Short
.045 - .060
[1.14] - [1.52]
.025 - .035
[0.64] - [0.89]
*Solder Thief Solder Pads required only on
Solder side of PC Board.
View A
D ± .002
E
.160 Min
[4.06]
2X .205 ± .003
[5.21]
.050 ± .003
[1.27]
.050 ± .002 Typ
[1.27]
Tolerance Noncumulative
.100 ± .002
[2.54]
Flow Solder
Direction
VIEW A
.225 Min
[5.72]
View A
.100 ± .002
[2.54]
2X ∅ .109 ± .002
[2.77]
∅.025 ± .003 Typ
[0.64]
Recommended Mounting Hole Pattern
PTH Vertical Header
(shown for mounting side of PC Board)
Inch
[Imm]
Tolerance Unless Noted
.0
.00
.000
Inch
±.1
±.01
±.005
[ ] Dimensions for Reference Only
Note:
1. Recommended to process PC Boards through the solder bath such that the connector enters end first
(two solder tails at a time).This will help prevent solder bridging.
2.A Solder Thief Solder Pad (Dummy Pad) at the end of each row is recommended on the bottom or solder side of the PC Board in order to
help prevent solder bridging on the end solder tails.The Solder Thiefs are only required on the end of the rows which leave the solder
bath last.
TS-0253-K
Sheet 5 of 7
3M is a trademark of 3M Company.
3
For technical, sales or ordering information call
Electronic Solutions Division
Interconnect Solutions
800-225-5373
http://www.3Mconnectors.com
3M™ 4-Wall, Tripolarized Header
.050" × .100" Latch/Ejector, PTH & SMT Straight, PTH RightAngle
810 Series
Table 7
Dimensions
Contact
Quantity
C
D Short
(Ref.)
D Long
(Ref.)
Tape &
Reel Suffix
A
B
1.060
[26.92]
0.722
[18.34]
1.671
[42.44]
1.842
[46.79]
020
026
036
040
050
060
068
080
100
WF
WF
WG
WG
WG
WG
WH
WH
WH
1.210
[30.73]
0.872
[22.15]
1.821
[46.25]
1.992
[50.60]
1.460
[37.08]
1.122
[28.50]
2.071
[2.60]
2.242
[56.95]
1.560
[39.62]
1.222
[31.04]
2.171
[55.14]
2.342
[59.49]
1.810
[45.97] [37.39]
1.472
2.421
[61.49]
2.592
[65.84]
2.060 1.722
2.671
[67.84]
2.842
[72.19]
[52.32] [43.74]
2.260 1.922
2.871
[72.92]
3.042
[77.27]
[57.40] [48.82]
2.560 2.222
3.171
[80.54]
3.342
[84.89]
[65.02] [56.44]
3.060 2.722
3.671
[93.24]
3.842
[97.59]
[77.72] [69.14]
Notes: Latches supplied in the "open" position unless specified otherwise
Suffix determined with no posts or clips.
Addition of posts or clips may increase suffix.
120 mm (WH) is the maximum width of pocket tape.
D
Short Latch
Position 1
Long Latch
Orientation
Triangle
.140 ± .010
[3.56]
.165 ± .010
[4.19]
.440 ± .010
[11.18]
.828 Ref
[21.03]
.265
[6.73]
.05 Ref
Contact
Mating
Point
.405
[10.29]
.620 Ref
[15.75]
.015
[0.38]
.092
[2.34]
.346 ± .010
[8.79]
Optional Single Press
Fit Post Mount/Alignment
Feature
.093
[2.36]
Inch
[Imm]
Optional Metal
Clip Retention
∅.116
[2.95]
Tolerance Unless Noted
.0
.00
.000
Notes:
1.This polarization bump does not exist on the 20 position header.
2. Recommended to be mated to the .050" X .100" 820 Series Wiremount Socket.
Inch
±.1
±.01
±.005
[ ] Dimensions for Reference Only
Ejector Latches
(If Ordered Separately)
Long Latches
Ordering Information
SMT Straight Header
81XXX - 6X0C0X - XX - XX
Contact Quantity
(See Table 7)
3505-28B (black)
Packaging Options:
Blank = Trays
Short Latches
Ejector/Latch System:
WX = Tape & Reel Package
(see table)
3505-29B (black)
0 = None (Special Order)
5 = With Short Ejectors Installed (Special Order)
Board Mounting Options:
1 = None
4 = Press Fit Post Mount at Position 1 end
7 = Metal retention clips
8 = #1 end press fit post & metal retention clips
(Special Order)
6 = With Long Ejector Latches Installed
(Standard)
Plating suffix:
blank = 125 µ" tin lead tails (RIA E3 & C2 apply)
RB = 250 µ" matte tin tails (RIA E1 & C1 apply)
TS-0253-K
Sheet 6 of 7
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnectors.com
3M™ 4-Wall, Tripolarized Header
.050" × .100" Latch/Ejector, PTH & SMT Straight, PTH RightAngle
810 Series
Dimensions
H Min
Ejector Latches
.065 .002 Typ
[1.65]
None
.775 [19.69]
1.085 [27.56]
1.21 [30.73]
Long
Short
.042 .003 Typ (Plated thru hole)
[1.07]
No. of Positions
Dimensions
F
G
Typ, Full R
20
.450 [11.43]
.600 [15.24]
.850 [21.59]
.950 [24.13]
1.200 [30.48]
1.450 [36.83]
1.650 [41.91]
1.950 [49.53]
2.450 [62.23]
N/A
26
.025 [0.64]
N/A
Detail A
Optional plated thru hole
for metal clip retention
36
40
50
N/A
.025 [.64]
0.000
60
68
0.000
80
0.000
100
0.000
C
L
F
Optional Drilled Hole
for Plastic Post
∅.109 ± .002
[2.77]
C
L
.050 ± .002 Typ
[1.27]
2X .075 ± .002
[1.905]
Tolerance Noncumulative
See Detail A
.029 ± .001
[0.74]
C
L
Position 2
.158 ± .002
G
[4.01]
.220 ± .003
[5.59]
.376
[9.55]
C
L
Position 1
.110 ± .002
[2.79]
H
.280
[7.11]
Recommended Mounting Hole Pattern,
SMT Straight Header
.205 ± .003
[5.21]
(Shown for mounting side of PC Board)
TS-0253-K
Sheet 7 of 7
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnectors.com
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable,
but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for
your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are
not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or effect
unless expressly agreed upon, in writing, by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture for a period of ninety (90) days from the time of purchase. 3M
MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at
3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M
will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless
of the legal theory asserted.
3
3M Electronics Solutions Division
6801 River Place Blvd.
Austin, TX 78726-9000
U.S.A.
1-800-225-5373
www.3Mconnectors.com
Please recycle. Printed in USA.
© 3M 2012. All rights reserved.
RIA-2217B-E
3M is a trademark of 3M Company.
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明