D3408-5002AR [3M]

16 CONTACT(S), MALE, STRAIGHT TWO PART BOARD CONNECTOR, SOLDER, ROHS COMPLIANT;


型号：	D3408-5002AR
厂家：	3M ELECTRONICS
描述：	16 CONTACT(S), MALE, STRAIGHT TWO PART BOARD CONNECTOR, SOLDER, ROHS COMPLIANT 连接器
文件：	总7页 (文件大小：1074K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

3M^™Four-Wall Header

.100” × .100” Latch/Ejector, Straight and RightAngle

D3000 Series

•ꢀ Military (with 3M’s 3518 & N3518 polarizing key)

and centerbump polarization

•ꢀ Optional ejector latches

•ꢀ Mounting holes for securing header to board

•ꢀ Optional polarizing posts available

•ꢀ High temperature insulator suitable for “no lead”

soldering operations

•ꢀ High temperature insulator in through-hole version

suitable for “paste in hole” reﬂow soldering

•ꢀ See Regulatory InformationAppendix for chemical

compliance information

Date Modiﬁed: September 24, 2008

TS-2245-C

Sheet 1 of 4

Physical

Insulator:

Material: High Temp Glass Filled Polyester (PCT)

Flammability: UL 94V-0

Color: Black (PCT)

Contact:

Material: Brass

Plating:

Underplating:

50-100 μ” [ 1.25 μm ] Ni

WipingArea: 10 μ” [ 0.25 μm ] Gold

Solder Tails: 40 - 120 μ” [ 1-3 μm ] Matte Tin

3M Logo, Part Identiﬁcation Number and Orientation Triangle

Marking:

Electrical

2A (EIA 364-70)

Current Rating:

Insulation Resistance:

Withstanding Voltage:

>1 × 10⁹Ω at 500V_DC

1,000V_RMSat Sea Level

Environmental

-55°C to +105°C

Temperature Rating:

260°C single pass, (proﬁle per J-STD-020C)

1 (per J-STD-020C)

Process Rating:

Moisture Sensitivity Level:

UL File No.: E68080

3M is a trademark of 3M Company.

For technical, sales or ordering information call

Electronic Solutions Division

Interconnect Solutions

800-225-5373

http://www.3M.com/interconnects/

3M^™Four-Wall Header

.100” × .100” Latch/Ejector, Straight and RightAngle

D3000 Series

-X2XX

-X3XX

Header with

Short Ejector/Latch

for 3M Sockets without

Strain Relief

-X0XX

Header with

Header without Latch Ejector

Long Ejector/Latch

for 3M Sockets with

Strain Relief

.08

[2.0]

.08

[2.0]

.573 .010

[ 14.55 ]

.424 .010

[ 10.77 ]

1.07 Ref

[27.2]

.97 Ref

[24.6]

.37 Ref

[9.4]

.46 Ref

[11.7]

.025 .002 Sq Typ

[ 0.64 ]

.28

7.1

.100

2.54

REF.

.020

0.51

.24

[6.1]

.34

8.6

.25

6.4

.13

.30

[7.6]

3.3

.100

REF.

2.54

2X O .100 [2.54]

SEE NOTE #2

POSITION #1

Dim. E

“Y”

Notch A

(See Table 1 & Note1)

F Typ

Position 1

Orientation

Triangle

Notch B

Section A-A

(Straight)

(See Table 1)

Notch C

(See Table 1 & Note 1)

.025 .002 Sq Typ

[ 0.64 ]

.16

[4.1]

.21

[5.3]

.24

[6.1]

.68

[17.3]

F Typ

“Y”

.12

[3.0]

.35

[8.9]

.30

[7.6]

.020

[0.51]

Dim. E

.197

[5.00]

.049 Ref

[1.24]

.20

[5.1]

2X ø .100

[2.54]

(See Note 2)

.100 Ref

[2.54]

Section B-B

(Right Angle)

TS-2245-C

Sheet 2 of 4

3M is a trademark of 3M Company.

For technical, sales or ordering information call

Electronic Solutions Division

Interconnect Solutions

800-225-5373

http://www.3M.com/interconnects/

3M^™Four-Wall Header

.100” × .100” Latch/Ejector, Straight and RightAngle

D3000 Series

Table 1

Dimensions

3M Part

Pin Qty

Polarizing

Notches

Number

3793

3314

3408

3428

3627

3429

3440

3431

3432

3433

3372

3764

1.265 (32.13)

1.465 (37.21)

1.565 (39.75)

1.765 (44.83)

1.965 (49.91)

2.065 (52.45)

2.265 (57.53)

2.465 (62.61)

2.765 (70.23)

3.265 (82.93)

3.765 (95.63)

3.965 (100.71)

1.104 (28.04)

1.304 (33.12)

1.404 (35.66)

1.604 (40.74)

1.804 (45.82)

1.904 (48.36)

2.104 (53.44)

2.304 (58.52)

2.604 (66.14)

3.104 (78.84)

3.604 (91.54)

3.804 (96.62)

0.865 (21.97)

1.065 (27.05)

1.165 (29.59)

1.365 (34.67)

1.565 (39.75)

1.665 (42.29)

1.865 (47.37)

2.065 (52.45)

2.365 (60.07)

2.865 (72.77)

3.365 (85.47)

3.565 (90.55)

0.705 (17.91)

0.905 (22.99)

1.005 (25.53)

1.205 (30.61)

1.405 (35.69)

1.505 (38.23)

1.705 (43.31)

1.905 (48.39)

2.205 (56.01)

2.705 (68.71)

3.205 (81.41)

3.405 (86.49)

Inch

(mm)

ABC

Tolerance Unless Noted

.00

.000

Inch

± .005

± .01

± .1

[ ] Dimensions for

Reference only

Table 2

Pin Cross Section

Diagonals

3M Part

Number Sufﬁx

Contact Tail

Dim E

Dimension G

Dim F

Corner Radii

-5XX2

-6XX2

Solder Tail for

.062 [1.57]

Thick PC Board

.0075 Ref

[0.191]

Ø.035 ±.003

[0.89] (See Note 3)

.112 ± .010

[2.84]

.0245 ± .0005

[0.622]

.028 ± ..001

[0.71]

or ø.116

[2.95]

ø.106

[2.69]

ø.106

[2.69]

ø.116

[2.95]

.41

[10.4]

Max to Edge of PCB

for Daisy Chain

(See Note 2)

.300

[7.62]

Dim G

Side to Side Stackability

Dim G

"Y"

“Y”

Position 1

.029

.060

[1.52]

[0.74]

.100 .003

[2.54]

.100 .003

[2.54]

.100 .003

[2.54]

.232

[5.89]

.352

[8.94]

.100 .003

[2.54]

Recommended Mounting Hole Pattern

(Straight)

(Right Angle)

Notes:

1. Notches A & C will accomodate 3M Polarizing Keys (3M Part #3518 or #N3518).

2. Mounting hardware: From solder side of pc board use #4-24 thread cutting screw (3M Part # 3341-5) and .116 [2.95] dia mounting hole.

For right angle version only, #2-56 bolt and nut (3M Part # 3341-6) with .106 [2.69] dia mounting hole may be used.

3. Contact your 3M sales representative for custom requirements.

Ordering Information

D3XXX - XX02AR

Plating:

3M Part Number

AR = 10 μ” [.25 μm] Gold (RIA E1 & C1 apply)

Pin Conﬁguration

5 = Right Angle Solder Tails

6 = Straight Solder Tails

(See Table 1)

Tail

02 = for .062 [1.57] thick board

Latch/Ejector System

0 = No Latch/Ejector installed

2 = Short Roll Pin Latch/Ejectors

3 = Long Roll Pin Latch/Ejectors

TS-2245-C

Sheet 3 of 4

3M is a trademark of 3M Company.

For technical, sales or ordering information call

Electronic Solutions Division

Interconnect Solutions

800-225-5373

http://www.3M.com/interconnects/

3M^™Four-Wall Header

, Accessories

.100” × .100” Latch/Ejector, Straight and RightAngle

D3000 Series

Part Customization

This spec sheet details our standard offering.

Polarizing Post

3M has several capabilities that can provide a

part tailored to your speciﬁc needs. Ask your

3M sales representative or customer service for

more details.

.321

[8.15]

3201-4

LC P

B lac k

.100 Dia

[2.54]

•ꢀTheꢀ-2ꢀ&ꢀ-3ꢀrollꢀpinꢀlatchesꢀ(mayꢀbeꢀorderedꢀ

Note: Insert Post into one mounting hardware hole on

bottom of header. Set post to protrude .115” [2.92]

separately with roll pins included)

•ꢀ

Snap-inꢀstyleꢀlatch/ejectorsꢀinꢀeitherꢀshortꢀ

(N3XXXX5XXX) or long (N3XXX-X6XX)

styles, may also be ordered separately, and are

functional and dimensional equivalents to the

-2 and -3 roll pin latches.

If ordering latches separately, please use the below chart

Short Latch

N3505-30B

N3505-2B

Long Latch

N3505-31B

N3505-3B

Latch Style

Snap In

Color

Black

High Temperature (PPA)

High Temperature (PCT)

Roll Pin

• Selective pin removal (ATA or other compatability)

Mounting Hardware

Polarizing Keys

3341-6

(Must be inserted prior to latch on

vertical headers)

3341-5

(Installed from bottom of board)

N3518

LCP

Black

.02

.50

[12.7]

.31

[7.9]

.09

[2.3]

Breakaway Tab

.34 Ref

[8.6]

Hex Head Bolt, Nut and Washer

Bolt - #2-56 X 1/2”

Panhead Thread Cutting Screw:

#4-24 X 5/16”

Type: USA Std BT, Federal BG

.15

[3.8]

3341-5 & 6

Material - Stainless Steel

Note: #2216 B/A Scotchweld can be used to adhere keys.

TS-2245-C

Sheet 4 of 4

3M is a trademark of 3M Company.

For technical, sales or ordering information call

800-225-5373

Electronic Solutions Division

Interconnect Solutions

http://www.3M.com/interconnects/

Regulatory Information Appendix

3M Electronic Solutions Division/Interconnect

EUROPE

Appendix E1: European Union RoHS

Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as

amended by EU Commission Decision 2005/618/EC.

This product is RoHS Compliant 2005/95/EC.

“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of

the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless

the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information

represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and

Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

Appendix E2: European Union RoHS

Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as

amended by EU Commission Decision 2005/618/EC.

This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is

compliant by exemption under EU Commission Decision 2005/747/EC.

“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of

the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless

the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information

represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and

Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

Appendix E3: European Union RoHS

Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as

amended by Commission Decision 2005/618/EC.

This product contains lead in the solder tail area in excess of the maximum concentration value allowed.

Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information

provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and

Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

Appendix E4: European Union RoHS

Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as

amended by EU Commission Decision 2005/618/EC, as amended by EU Commission Decision 2005/717/EC, as amended by

EU Court of Justice Decision 2008/C 116/04

This product contains decaBDE in the insulating material in excess of the maximum concentration allowed for ﬁnished

products subject to EU RoHS that are placed on the EU market after June 30, 2008.

Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information

provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and

Buyer’s exclusive remedy will be in accordance with the Warranty stated below.product Warranty stated below.

RIA-2217A-E

Appendix E5: European Union RoHS

Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment, as

amended by EU Commission Decision 2005/618/EC.

This product contains lead in excess of the maximum concentration value allowed but is compliant by exemption under

Item 6 of the Annex to the Directive.

“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of

the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless

the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information

represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and

Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

CHINA

Appendix C1: China RoHS

Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for

Certain Hazardous Substances in Electronic Information Products.

This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the

product or part does not contain any of the following substances in excess of the following maximum concentration values in any

homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated

diphenyl ethers (excluding decaBDE); or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this

information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and

Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

Appendix C2: China RoHS

Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain

Hazardous Substances in Electronic Information Products.

This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that

the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration

values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or

polybrominated diphenyl ethers (excluding decaBDE); or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in

writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an

extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with

3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the

product Warranty stated below.

RIA-2217A-E

Appendix C3: China RoHS