DIN-096RPC-S110-KT [3M]
Board Euro Connector, 96 Contact(s), 3 Row(s), Male, Straight, Solder Terminal, Plug;
| 型号： | DIN-096RPC-S110-KT |
| 厂家： | 
3M ELECTRONICS |
| 描述： | Board Euro Connector, 96 Contact(s), 3 Row(s), Male, Straight, Solder Terminal, Plug |
| 文件： | 总7页 (文件大小：633K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
3M™ DIN R-Form Plug
.100” Inverse Mount, Vertical, Solder Tail or Press-Fit Termination
DIN 41612 Series
• Early mate late break (EMLB) grounding contacts for
hot swapping
• Select load capability
• Expanded pin counts
• Optional press-fit or solder tail termination
• Optional retention clips
• Mates with R-form and C-form sockets
• See Regulatory InformationAppendix (RIA) for
chemical compliance information
Date Modified: February 20, 2008
TS-1133-D
Sheet 1 of 4
Physical
Insulation:
Material: Glass Filled Polyester (PCT)
Flammability: UL 94V-0
Color: Gray or Black
Contact:
Material: CopperAlloy
Plating:
Underplating:
50 μ” [ 1.27 μm ] Min. Niel
WipingAreee Ordering Information)
TerminationAree Ordering Information)
Part Number anDate Code
Marking:
Electrical
0 mΩ Max.
Contact Resistance:
Current Rang:
3.0A @ 30°C T-rise above ambient
1 x 10³ MΩ min. at 500VDC
Insulation Resistance:
Withstanding Voltage:
1 x 10³ V for 1 minute
AC
Environmental
-55°C to +125°C
Temperature Rating:
260°C per J-STD-020C
1 (per J-STD-020C)
Temperature Rating:
Moisture Sensitivity Level:
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3
Electronic Solutions Division
Interconnect Solutions
http://www.3M.com/interconnects/
3M™ DIN R-Form Plug
.100” Inverse Mount, Vertical, Solder Tail or Press-Fit Termination
DIN 41612 Series
A
D
POSITION A1
B
.200
5.08
.437
11.10
.100
2.54
.343
8.71
PRESS-FIT OR SOLDER TAIL
.205
5.21
.195
4.95
S1 MATE LENGTH
.457
11.61
.160
[4.06]
S110 MATE LENGTH
C
WITH OR WTHOUT
RETENTIOIP
C
TAIL LENG
E
FOR SPECIAL PIN ARRANGEMENTS
CONTACT 3M SALES REPRESENTATIVES
.150
3.80
.200
5.08
Au FINISH
Inch
[mm]
Tolerance Unless Noted
.00
.01
.000
.00ꢀ
.0
.1
Feed Thru/Wire Wrap
W, DPWI and DPW2 with
Inch
plating finish selected from Table 3,
with precious metal plated on both ends.
[ ] Dimensions for
Reference only
Ordering Information
DIN - XXX RPX - XXXX - XXXX
Contact Quantity
See Table
Contact Loading Pattern:
A = A Row only
B = Rows A & C Filled
C = Rows A, B, & C Filled
D = Rows A & B Filled
E = B Row only
Plating and Insulator Color Options:
See Table 3
Termination Options:
See Table 2
TS-1133-D
Sheet 2 of 4
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3
Electronic Solutions Division
Interconnect Solutions
http://www.3M.com/interconnects/
3M™ DIN R-Form Plug
.100” Inverse Mount, Vertical, Solder Tail or Press-Fit Termination
DIN 41612 Series
Table 1
Contact
Quantity
Load
A
B
D
E
Pattern
016
032
048
032
016
032
064
096
064
032
040
080
120
080
040
0ꢀ0
A
B
C
D
E
A
B
C
D
E
A
B
C
D
E
A
2.140 [ꢀ4.36]
2.140 [ꢀ4.36]
2.140 [ꢀ4.36]
2.140 [ꢀ4.36]
2.140 [ꢀ4.36]
3.740 [9ꢀ.00]
3.740 [9ꢀ.00]
3.740 [9ꢀ.00]
3.740 [9ꢀ.00]
3.740 [9ꢀ.00]
4.ꢀ40 [11ꢀ.32]
4.ꢀ40 [11ꢀ.32]
4.ꢀ40 [11ꢀ.32]
4.ꢀ40 [11ꢀ.32]
4.ꢀ40 [11ꢀ.32]
ꢀ.ꢀ40 [140.72]
1.7ꢀ4 [44.ꢀꢀ]
1.7ꢀ4 [44.ꢀꢀ]
1.7ꢀ4 [44.ꢀꢀ]
1.7ꢀ4 [44.ꢀꢀ]
1.7ꢀ4 [44.ꢀꢀ]
3.3ꢀ4 [8ꢀ.19]
3.3ꢀ4 [8ꢀ.19]
3.3ꢀ4 [8ꢀ.19]
3.3ꢀ4 [8ꢀ.19]
3.3ꢀ4 [8ꢀ.19]
4.1ꢀ4 [10ꢀ.ꢀ1]
4.1ꢀ4 [10ꢀ.ꢀ1]
4.1ꢀ4 [10ꢀ.ꢀ1]
4.1ꢀ4 [10ꢀ.ꢀ1]
4.1ꢀ4 [10ꢀ.ꢀ1]
ꢀ.1ꢀ4 [130.91]
1.943 [49.3ꢀ]
1.943 [49.3ꢀ]
1.943 [49.3ꢀ]
1.943 [49.3ꢀ]
1.943 [49.3ꢀ]
3.ꢀ43 [89.99]
3.ꢀ43 [89.99]
3.ꢀ43 [89.99]
3.ꢀ43 [89.99]
3.ꢀ43 [89.99]
4.343 [110.31]
4.343 [110.31]
4.343 [110.31]
4.331]
4.3431]
ꢀ.343 ꢀ.71]
1.ꢀ00 [38.10]
1.ꢀ00 [38.10]
1.ꢀ00 [38.10]
1.ꢀ00 [38.10]
1.ꢀ00 [38.10]
3.100 [78.74]
3.100 [78.74]
3.100 [78.74]
3.100 [78.74]
3.100 [78.74]
3.900 [99.06]
3.900 [99.06]
3.900 [99.06]
3.900 [99.06]
3.900 [99.06]
4.900 [124.46]
100
1ꢀ0
100
0ꢀ0
B
C
D
E
ꢀ.ꢀ40 [140.72]
ꢀ.ꢀ40 [140.72]
ꢀ.ꢀ40 [140.72]
ꢀ.ꢀ40 [140.72]
ꢀ.1ꢀ4 [130.91]
ꢀ.1ꢀ4 [130.91]
ꢀ.1ꢀ4 [130.91]
ꢀ.1ꢀ4 [130.91
ꢀ.343 [13ꢀ.71]
ꢀ.343 [13ꢀ.71]
ꢀ.343 [13ꢀ.71]
ꢀ.343 [13ꢀ.71]
4.900 [124.46]
4.900 [124.46]
4.900 [124.46]
4.900 [124.46]
Table 2
DIM “C” in (mm)
Solder Termination Option No
Comments
R1
S1
S110
W
0.1ꢀ7 (3.99)
0.1ꢀ7 (3.99)
0.110 (2.79)
0.ꢀ12 (13.00)
with retention
Press-fit Termination Option No
DPS
DPW1
DPW2
0.189 (4.80)
0.ꢀ12 (.00)
0.669 (16.99)
Table 3
Plating
Suffix
Insulator
Color
PreFit
Terminations
Solder Tail
Terminations
Plating Composition
76 μm [30 μ”] Min. Au Contact Area
(RIA E2 & C2
apply)
2.ꢀ4 μm [100 μ”] Min. SnPb Tail Area
1.27 μm [ꢀ0 μ”] Min. Ni all over
TG30
Gray
Gray
(RIA E3 & C2 apply)
(RIA E3 & C2 apply)
0.08 μm [3 μ”] Min. Au Contact Area
0.18 μm [7 μ”] Min. PdNi Contact Area
2.ꢀ4 μm [100 μ”] Min. SnPb Tail Area
1.27 μm [ꢀ0 μ”] Min. Ni all over
(RIA E2 & C2
apy)
TR
RR
0.08 μm [3 μ”] Min. Au over 0.18 μm
[7 μ”] Min. PdNi Contact Area (each end)
2.ꢀ4 μm [100 μ”] Min. SnPb Term. Area
1.27 μm [ꢀ0 μ”] Min. Ni all over
(RIA E2 & C2
apply)
Gray
Gray
N/A
N/A
0.08 μm{3 μ”] Min. Au over 0.18 μm
[7 μ”] Min. PdNi Contact Area
ꢀ.08 μm [200 μ”] Min. RoHS
(RIA E1 & C1
aply)
HM
Compliant Whisker Mitigating
Matte Sn Term. Area
1.27 μm [ꢀ0 μ”] Min. Ni all over
0.76 μm [30 μ”] Min. Au Contact Area
ꢀ.08 μm [200 μ”] Min. Reflowed Matte
Whisker Mitigating Sn Term. Area
1.27 μm [ꢀ0 μ”] Min. Ni all over
0.08 μm [3 μ”] Min. Au over 0.18 μm
[7 μ”] Min. PdNi Contact Area
(RIA E1 & C1
apply)
MH
HS
KT
Black
Black
Black
(RIA E1 & C1 apply)
(RIA E1 & C1 apply)
(RIA E1 & C1 apply)
(RIA E1 & C1
apply)
ꢀ.08 μm [200 μ”] Min. Reflowed Matte
Whisker Mitigating Sn Term. Area
1.27 μm [ꢀ0 μ”] Min. Ni all over
0.2ꢀ μm [10 μ”] Min. Au Contact Area
ꢀ.08 μm [200 μ”] Min. Reflowed Matte
Whisker Mitigating Sn Term. Area
1.27 μm [ꢀ0 μ”] Min. Ni all over
(RIA E1 & C1
apply)
TS-1133-D
Sheet 3 of 4
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3
Electronic Solutions Division
Interconnect Solutions
http://www.3M.com/interconnects/
3M™ DIN R-Form Plug
.100” Inverse Mount, Vertical, Solder Tail or Press-Fit Termination
DIN 41612 Series
-C-
D
E
.012
.100
2.54
.30
.100
2.54
TYP.
C
B
A
-B-
.200
5.08
1
2
X
.110
2.79
O F
O
.100
2.54
PLATED THRU HOLE
-A-
l O 0.006 M A B C
l O 0.004 M A B C
RECOMMENDED MOUNTING HOLE PTERN
Hole Plating Table For TG,TR, RR (Preit Leads)
Hole
“F”
Drilled Hole Dia. In (mm)
Drilled Hole Dia. In (mm)
Cu Thickness in (mm)
SnPb Thickness μin (μm)
Finished Dia. In (mm)
0.037 - 0.043 (0.94 - 1.09)
Hole Plating Table For G,TR, RR (Solder Tail Leads)
Cu Thickness in (mm) SnPThickness μin (μm)
Hole
“F”
Finished Dia. In (mm)
0.041 - 0.049 (1.04 - 1.24)
Hole Plating Table For MH, HS, KT (Press-Fit Leads)
Immersion Whisker Mitigating
Hole
“F”
Drilled Hole Dia. In (mm)
Cu Thickness in (mm)
Finished Dia. In (mm)
Matte Sn Thickness μin (μm)
0.042ꢀ-0.044 (1.080-1.118) #ꢀ7 OR
1.10mm Twist Drill
0.0010 - 0.0020 (0.02ꢀ - 0.04ꢀ)
20 - 100 (0.ꢀ08 - 2.ꢀ4)
0.037 - 0.043 (0.94 - 1.09)
Hole Plating Table For MH, HS, KT (Solder Tail Leads)
Immersion Matte Sn Thickness
Hole
“F”
Drilled Hole Dia. In (mm)
Cu Thickness in (mm)
Finished Dia. In (mm)
μin (μm))
0.041 - 0.049 (1.04 - 1.24)
TS-1133-D
Sheet 4 of 4
3M is a trademark of 3M Company.
3
For technical, sales or ordering information call
Electronic Solutions Division
Interconnect Solutions
800-225-5373
http://www.3M.com/interconnects/
Regulatory Information Appendix
3M Electronic Solutions Division/Interconnect
EUROPE
Appendix E1: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product is RoHS Compliant 2005/95/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Informatioppendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E2: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product contains lead in the compliant pin area in excess of the maximconcentration e allowed but is
compliant by exemption under EU Commission Decision 2005/747/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amed by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven nonform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E3: European Union RoHS
Directive 2002/95/EC, Restriction of the Use oCertain Hazardous Substances in Electrical & Electronic Equipment as
amended by Commission Decision 200/618/EC.
This producins lead in tsolder tail area in excess of the maximum concentration value allowed.
Unless otherwisstated by 3M iwriting, this information represents 3M’s best knowledge and belief based upon information
provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E4: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product contains decaBDE in the insulating material in excess of the maximum concentration value allowed but is
compliant by exemption under EU Commission Decision 2005/717/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
RIA-2217B-D
Appendix E5: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product contains lead in excess of the maximum concentration value allowed but is compliant by exemption under
Item 6 of the Annex to the Directive.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
CHINA
Appendix C1: China RoHS
Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for
Certain Hazardous Substances in Electronic Information Products.
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means
that the product or part does not contain any of the following substances in excess of the wing maximum centration
values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls
or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this
information represents 3M’s best knowledge and belief based upon information pded by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordanthe Warranty stated below.
Appendix C2: China RoHS
Electronic Industry Standard of the People’s Republic hina, SJ/T11363-2006, Requirements for Concentration Limits for
Certain Hazardous Substances in Electronic Information Products.
This symbol, per Markior the Control of Polution Caused by Electronic Information Products, SJ/T11364-2006, means that
the product or part doeain a substaas detailed in the chart below, in excess of the following maximum concentration
values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls
or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this
information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an
extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with
3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the
product Warranty stated below.
RIA-2217B-D
Appendix C3: China RoHS
Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for
Certain Hazardous Substances in Electronic Information Products.
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that
the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration
values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls
or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this
information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an
extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with
3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exremedy will be in accordance with the
product Warranty stated below.
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness
is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated
with such use. Any statements related to the produt which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order
shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3M MAKES NO OTHER WARRANTIES
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the
warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except
where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of
the legal theory asserted.
3
3M Electronics Solutions Division
6801 River Place Blvd.
Austin, TX 78726-9000
U.S.A.
1-800-225-5373
www.3m.com/interconnects
Please recycle. Printed in USA.
© 3M 2008. All rights reserved.
RIA-2217B-D
3M is a trademark of 3M Company.
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明