HDC-S195-31S2-HM [3M]

Board Connector, 195 Contact(s), 3 Row(s), Female, Right Angle, Solder Terminal, Socket, ROHS COMPLIANT;
HDC-S195-31S2-HM
型号: HDC-S195-31S2-HM
厂家: 3M ELECTRONICS    3M ELECTRONICS
描述:

Board Connector, 195 Contact(s), 3 Row(s), Female, Right Angle, Solder Terminal, Socket, ROHS COMPLIANT

文件: 总10页 (文件大小:1327K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
3MHDC Socket  
.100” RightAngle, PCB, 3 or 4-Row, Solder Tail or Press-Fit  
HDC Series  
•ꢀ High density 3-row version, up to 240 contacts single  
bay or 366 contacts dual bay  
•ꢀ Mates with 3-row single or dual bay plugs and  
headers  
•ꢀ High density 4-row version, up to 320 contacts single  
bay or 488 contacts dual bay  
•ꢀ Mates with 4-row single or dual bay plugs and  
headers  
•ꢀ Low 2 oz. insertion force  
•ꢀ See Regulatory InformationAppendix (RIA) for  
chemical compliance information  
Date Modified: March 25, 2008  
TS-1137-B  
Sheet 1 of 7  
Physical  
Insulation:  
Material: Glass Filled Thermoplastic (LCP)  
Flammability: UL 94V-0  
Color: Black  
Contact:  
Material: CopperAlloy  
Plating:  
Underplating:  
50 μ” [ 1.27 μm ] min. Nickel  
WipingArea: See Ordering Information  
TerminationArea: See Ordering Information  
Part Number and Date Code  
Marking:  
Electrical  
3.0A per contact  
Current Rating:  
Insulation Resistance:  
Withstanding Voltage:  
1 x 103 MΩ min. at 500VDC  
900V for 1 minute  
AC  
Environmental  
-55°C to +125°C  
Temperature Rating:  
Maximum 260°C (per J-STD-020C)  
1 (per J-STD-020C)  
Process Rating:  
Moisture Sensitivity Level:  
UL File No.: E68080  
3M is a trademark of 3M Company.  
For technical, sales or ordering information call  
800-225-5373  
3
Electronic Solutions Division  
Interconnect Solutions  
http://www.3M.com/interconnects/  
3MHDC Socket  
.100” RightAngle, PCB, 3 or 4-Row, Solder Tail or Press-Fit  
HDC Series  
3-Row Single Bay  
O 0.041- 0.049 PLATED-THRU HOLE, SOLDER TAIL  
O 0.037-0.043 PLATED-THRU HOLE, PRESS-FIT TAIL  
l O .004 M A B  
0.100  
CONNECTOR FOOTPRINT  
-B-  
0.100  
0.100  
0.275  
ROW C  
ROW B  
ROW A  
0.445  
-A-  
0.300  
O 0.120 2 Plcs.  
l O .002 A B  
C
B
Inch  
[mm]  
Tolerance Unless Noted  
A
.00  
.000  
.0  
PIN # 1  
±.005  
±.01  
±.1  
Inch  
RECOMMENDED P.C.B. HOLE PATTERN  
[ ] Dimensions for  
Reference only  
TS-1137-B  
Sheet 2 of 7  
3M is a trademark of 3M Company.  
For technical, sales or ordering information call  
800-225-5373  
3
Electronic Solutions Division  
Interconnect Solutions  
http://www.3M.com/interconnects/  
3MHDC Socket  
.100” RightAngle, PCB, 3 or 4-Row, Solder Tail or Press-Fit  
HDC Series  
Product Table/Dimensions for 3- Row, Single Bay  
Contact  
Description  
A
B
C
D
Quantity  
HDC-S045-31XX-XXXX  
HDC-S075-31XX-XXXX  
HDC-S090-31XX-XXXX  
HDC-S096-31XX-XXXX  
HDC-S102-31XX-XXXX  
HDC-S120-31XX-XXXX  
HDC-S135-31XX-XXXX  
HDC-S150-31XX-XXXX  
HDC-S165-31XX-XXXX  
HDC-S180-31XX-XXXX  
HDC-S195-31XX-XXXX  
HDC-S210-31XX-XXXX  
45  
2.250  
[57.15]  
3.250  
[82.55]  
3.750  
[95.25]  
3.950  
[100.33]  
4.150  
[105.41]  
4.750  
[120.65]  
5.250  
[133.35]  
5.750  
[146.05]  
6.250  
1.950  
[49.53]  
2.950  
[74.93]  
3.450  
[87.63]  
3.650  
[92.71]  
3.850  
[97.79]  
4.450  
[113.03]  
4.950  
[125.73]  
5.450  
[138.43]  
5.950  
1.400  
[35.56]  
2.400  
[60.96]  
2.900  
[73.66]  
3.100  
[78.74]  
3.300  
[83.82]  
3.900  
[99.06]  
4.400  
[111.76]  
4.900  
[124.46]  
5.400  
1.524  
[38.71]  
2.524  
[64.11]  
3.024  
[76.81]  
3.224  
[81.89]  
3.424  
[86.97]  
4.024  
[102.21]  
4.524  
[114.91]  
5.024  
[127.61]  
5.524  
75  
90  
96  
102  
120  
135  
150  
165  
180  
195  
210  
[158.75]  
6.750  
[171.45]  
7.250  
[184.15]  
7.750  
[151.13]  
6.450  
[163.83]  
6.950  
[176.53]  
7.450  
[137.16]  
5.900  
[149.86]  
6.400  
[162.56]  
6.900  
[140.31]  
6.024  
[153.01]  
6.524  
[165.71]  
7.024  
[196.85]  
8.250  
[209.55]  
8.350  
[212.09]  
8.750  
[189.23]  
7.950  
[201.93]  
8.050  
[204.47]  
8.450  
[175.26]  
7.400  
[187.96]  
7.500  
[190.50]  
7.900  
[178.41]  
7.524  
[191.11]  
7.624  
[193.65]  
8.024  
HDC-S225-31XX-XXXX  
HDC-S228-31XX-XXXX  
HDC-S240-31XX-XXXX  
225  
228  
240  
[222.25]  
[214.63]  
[200.66]  
[203.81]  
Ordering Information  
HDC - SXXX - XXXX - XXXX  
Plating Chart  
Plating  
Suffix  
Press-Fit  
Terminations  
Solder Tail  
Terminations  
Contact  
Quantity  
See 3 or 4 Row  
Table  
Plating composition  
Plating  
Options:  
(See Plating  
Chart)  
3 μ” [0.08 μm] Min. Au over  
7 μ” [0.18 μm] PdNi area 1  
100 μ” [2.54 μm] Min. Tin Lead area 4  
50 μ” [1.27 μm] Min. Ni all over  
(RIA E2 & C2  
apply)  
(RIA E3 & C2  
apply)  
TR  
Row Quantity  
3 = Three Row  
4 = Four Row  
30 μ” [0.76 μm] Min. Au Area 1  
100 μ” [2.54 μm] Min. Tin Lead Tail Area 4  
50 μ” [1.27 μm] Min. Ni all over  
(RIA E2 & C2  
apply)  
(RIA E3 & C2  
apply)  
TG30  
3 μ” [0.08 μm] Min Au on Area 1  
7 μ” [0.18 μm] PdNi on area 1  
100 μ” [2.54 μm] Min. Whisker Mitigating  
Matte Tin on Area 4  
(RIA E1 & C1  
apply)  
(RIA E1 & C1  
apply)  
HM  
KR  
50 μ” [1.27 μm] Min. Ni all over  
Insulator Options  
30 μ” [0.76 μm] Min. Au on Area 1  
100 μ” [5.08 μm] Min. Whisker Mitigating  
Matte Tin on Area 4  
(RIA E1 & C1  
apply)  
(RIA E1 & C1  
apply)  
1 = Single bay insulator  
2 = Dual bay insulator  
with center guide hole  
50 μ” [1.27 μm] Min. Ni all over  
Termination Style / Lead length - Dim. F  
P1 - Press-fit Right Angle / 0.157″ (4.00)  
S1 - Solder Right Angle / 0.110″ (2.79)  
S2 - Solder Tail / 0.160″ (4.06)  
TS-1137-B  
Sheet 3 of 7  
3M is a trademark of 3M Company.  
3
For technical, sales or ordering information call  
Electronic Solutions Division  
Interconnect Solutions  
800-225-5373  
http://www.3M.com/interconnects/  
3MHDC Socket  
.100” RightAngle, PCB, 3 or 4-Row, Solder Tail or Press-Fit  
HDC Series  
3-Row Dual Body  
Product Table/Dimensions for 3 Row, Dual Bay  
Pin  
Quantity  
Description  
A
B
C
D
E
8.650  
8.350  
7.800  
7.924  
3.700  
HDC-S228-32XX-XXXX  
HDC-S240-32XX-XXXX  
HDC-S258-32XX-XXXX  
HDC-S276-32XX-XXXX  
HDC-S294-32XX-XXXX  
HDC-S312-32XX-XXXX  
HDC-S330-32XX-XXXX  
HDC-S348-32XX-XXXX  
HDC-S366-32XX-XXXX  
228  
[219.71]  
[212.09]  
[198.12]  
[201.93]  
[93.98]  
9.050  
8.750  
8.200  
8.324  
3.900  
240  
258  
276  
294  
312  
330  
348  
366  
[229.87]  
[222.25]  
[208.28]  
[212.09]  
[99.06]  
9.650  
9.350  
8.800  
8.924  
4.200  
[245.11]  
[237.49]  
[223.52]  
[227.33]  
[106.68]  
10.250  
9.950  
9.400  
9.524  
4.500  
[260.35]  
[252.73]  
[238.76]  
[242.57]  
[114.30]  
10.850  
10.550  
10.000  
10.124  
4.800  
[275.59]  
[267.97]  
[254.00]  
[257.81]  
[121.92  
11.450  
11.150  
10.600  
10.724  
5.100  
[290.83]  
[283.21]  
[269.24]  
[273.05]  
[129.54]  
12.050  
11.750  
11.200  
11.324  
5.400  
[306.07]  
[298.45]  
[284.48]  
[288.29]  
[137.16]  
12.650  
12.350  
11.800  
11.924  
5.700  
[321.31]  
[313.69]  
[299.72]  
[303.53]  
[144.78]  
13.250  
12.950  
12.400  
12.524  
6.000  
[336.55]  
[328.93]  
[314.96]  
[318.77]  
[152.40]  
TS-1137-B  
Sheet 4 of 7  
3M is a trademark of 3M Company.  
3
For technical, sales or ordering information call  
Electronic Solutions Division  
Interconnect Solutions  
800-225-5373  
http://www.3M.com/interconnects/  
3MHDC Socket  
.100” RightAngle, PCB, 3 or 4-Row, Solder Tail or Press-Fit  
HDC Series  
4-Row Single Bay  
TS-1137-B  
Sheet 5 of 7  
3M is a trademark of 3M Company.  
For technical, sales or ordering information call  
800-225-5373  
3
Electronic Solutions Division  
Interconnect Solutions  
http://www.3M.com/interconnects/  
3MHDC Socket  
.100” RightAngle, PCB, 3 or 4-Row, Solder Tail or Press-Fit  
HDC Series  
Product Table/Dimensions for 4-Row Socket Single Bay  
Pin  
Description  
A
B
C
D
Quantity  
2.250  
[57.15]  
1.950  
[49.53]  
1.400  
[49.53]  
1.524  
[38.71]  
HDC-S060-41XX-XXXX  
HDC-S076-41XX-XXXX  
HDC-S080-41XX-XXXX  
HDC-S100-41XX-XXXX  
HDC-S120-41XX-XXXX  
HDC-S128-41XX-XXXX  
HDC-S140-41XX-XXXX  
HDC-S160-41XX-XXXX  
HDC-S168-41XX-XXXX  
HDC-S180-41XX-XXXX  
HDC-S200-41XX-XXXX  
HDC-S216-41XX-XXXX  
HDC-S220-41XX-XXXX  
HDC-S240-41XX-XXXX  
HDC-S260-41XX-XXXX  
HDC-S280-41XX-XXXX  
HDC-S300-41XX-XXXX  
HDC-S320-41XX-XXXX  
60  
2.650  
[67.31]  
2.350  
[59.69]  
1.800  
[45.72]  
1.924  
[48.87]  
76  
2.750  
[69.85]  
2.450  
[62.23]  
1.900  
[48.26]  
2.024  
[51.41]  
80  
3.250  
[82.55]  
2.950  
[74.93]  
2.400  
[60.96]  
2.524  
[64.11]  
100  
120  
128  
140  
160  
168  
180  
200  
216  
220  
240  
260  
280  
300  
320  
3.750  
[95.25]  
3.450  
[87.63]  
2.900  
[73.66]  
3.024  
[76.81]  
3.950  
[100.33]  
3.650  
[92.71]  
3.100  
[78.74]  
3.224  
[81.89]  
4.250  
[107.95]  
3.950  
[100.33]  
3.400  
[86.36]  
3.524  
[89.51]  
4.750  
[120.65]  
4.450  
[113.03]  
3.900  
[99.06]  
4.024  
[102.21]  
4.950  
[125.73]  
4.650  
[118.11]  
4.100  
[104.14]  
4.224  
[107.29]  
5.250  
[133.35]  
4.950  
[125.73]  
4.400  
[111.76]  
4.524  
[114.91]  
5.750  
[146.05]  
5.450  
[138.43]  
4.900  
[124.46]  
5.024  
[127.61]  
6.150  
[156.21]  
5.850  
[148.59]  
5.300  
[134.62]  
5.424  
[137.77]  
6.250  
[158.75]  
5.950  
[151.13]  
5.400  
[137.16]  
5.524  
[140.31]  
6.750  
[171.45]  
6.450  
[163.83]  
5.900  
[149.86]  
6.024  
[153.01]  
7.250  
[184.15]  
6.950  
[176.53]  
6.400  
[162.56]  
6.524  
[165.71]  
7.750  
[196.85]  
7.450  
[189.23]  
6.900  
[175.26]  
7.024  
[178.41]  
8.250  
[209.55]  
7.950  
[209.55]  
7.400  
[187.96]  
7.524  
[191.11]  
8.750  
[222.25]  
8.450  
[214.63]  
7.900  
[200.66]  
8.024  
[203.81]  
Product Table/Dimensions for 4-Row Socket, Dual Bay  
Description  
Pin Quantity  
A
B
C
D
E
9.050  
[229.87]  
8.750  
[222.25]  
8.200  
[208.28]  
8.324  
[211.43]  
3.900  
[99.06]  
HDC-S320-42XX-XXXX  
320  
9.650  
[245.11]  
9.350  
[237.49]  
8.800  
[237.49]  
8.924  
[226.67]  
4.200  
[106.68]  
HDC-S344-42XX-XXXX  
HDC-S352-42XX-XXXX  
HDC-S360-42XX-XXXX  
HDC-S368-42XX-XXXX  
HDC-S392-42XX-XXXX  
HDC-S416-42XX-XXXX  
HDC-S440-42XX-XXXX  
HDC-S464-42XX-XXXX  
HDC-s488-42XX-XXXX  
344  
352  
360  
368  
392  
416  
440  
464  
488  
9.850  
[250.19]  
9.550  
[242.57]  
9.000  
[228.60]  
9.124  
[231.75]  
4.300  
[109.22]  
10.050  
[255.27]  
9.750  
[247.65]  
9.200  
[233.68]  
9.324  
[236.83]  
4.400  
[111.76]  
10.250  
[260.35]  
9.950  
[252.73]  
9.400  
[238.76]  
9.524  
[241.91]  
4.500  
[114.30]  
10.850  
[275.59]  
10.550  
[267.97]  
10.000  
[254.00]  
10.124  
[257.15]  
4.800  
[121.92]  
11.450  
[290.83]  
11.150  
[283.21]  
10.600  
[269.24]  
10.724  
[272.39]  
5.100  
[129.54]  
12.050  
[306.07]  
11.750  
[298.45]  
11.200  
[284.48]  
11.324  
[287.63]  
5.400  
[137.16]  
12.650  
[321.31]  
12.350  
[313.69]  
11.800  
[299.72]  
11.924  
[302.87]  
5.700  
[144.78]  
13.250  
[336.55]  
12.950  
[328.93]  
12.400  
[314.96]  
12.524  
[318.11]  
6.000  
[152.40]  
TS-1137-B  
Sheet 6 of 7  
3M is a trademark of 3M Company.  
3
For technical, sales or ordering information call  
Electronic Solutions Division  
Interconnect Solutions  
800-225-5373  
http://www.3M.com/interconnects/  
3MHDC Socket  
.100” RightAngle, PCB, 3 or 4-Row, Solder Tail or Press-Fit  
HDC Series  
A
.820  
.605  
15.37  
20.83  
.105  
3X O  
2.67  
.210  
5.33  
.275  
.020  
6.98  
0.51mm  
.158  
4.01  
.105  
2.67  
PIN # 1  
.400  
10.16  
.434  
.276  
7.01  
O
11.02  
.204  
5.18  
ROW D  
ROW C  
ROW B  
ROW A  
.094  
.054  
1.37  
A
E
8
6
2
H
F
B
D
7
G
3
C
4
5
F
.460  
11.68  
0.080  
2.03  
.126  
3.20  
0.048 X .014 TYP.  
[1.2 X .36]  
.014  
.36  
.286  
7.26  
.128  
3.25  
PRESS-FIT TAIL  
SOLDER TAIL  
0.100  
.100  
3X  
TYP.  
2.54  
2.54  
.318  
8.08  
0.024 X .014 TYP.  
[.61 X .36]  
.179 - .182 ACROSS FLATS X .080 `  
[4.54 - 4.62] [ 2.03]  
C
D
B
O .041 - .049 PLATED-THRU HOLE, SOLDER TAIL  
O .037-.043 PLATED-THRU HOLE, PRESS-FIT  
CONNECTOR OUTLINE  
.100  
.200  
l O .004 M  
A B  
.275  
.400  
-B-  
.200  
.100  
ROW D  
ROW C  
-A-  
0.545  
ROW B  
ROW A  
.300  
.100  
3X O .120  
l O .002 A  
C
B
B
A
RECOMMENDED P.C.B. HOLE PATTERN  
TS-1137-B  
Sheet 7 of 7  
3M is a trademark of 3M Company.  
3
For technical, sales or ordering information call  
Electronic Solutions Division  
Interconnect Solutions  
800-225-5373  
http://www.3M.com/interconnects/  
Regulatory Information Appendix  
3M Electronic Solutions Division/Interconnect  
EUROPE  
Appendix E1: European Union RoHS  
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as  
amended by EU Commission Decision 2005/618/EC.  
This product is RoHS Compliant 2005/95/EC.  
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of  
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless  
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information  
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.  
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3Ms entire liability and  
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.  
Appendix E2: European Union RoHS  
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as  
amended by EU Commission Decision 2005/618/EC.  
This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is  
compliant by exemption under EU Commission Decision 2005/747/EC.  
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of  
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless  
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information  
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.  
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3Ms entire liability and  
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.  
Appendix E3: European Union RoHS  
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as  
amended by Commission Decision 2005/618/EC.  
This product contains lead in the solder tail area in excess of the maximum concentration value allowed.  
Unless otherwise stated by 3M in writing, this information represents 3Ms best knowledge and belief based upon information  
provided by third party suppliers to 3M.  
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3Ms entire liability and  
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.  
Appendix E4: European Union RoHS  
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as  
amended by EU Commission Decision 2005/618/EC.  
This product contains decaBDE in the insulating material in excess of the maximum concentration value allowed but is  
compliant by exemption under EU Commission Decision 2005/717/EC.  
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of  
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless  
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information  
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.  
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3Ms entire liability and  
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.product Warranty stated below.  
RIA-2217A-D  
Appendix E5: European Union RoHS  
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment, as  
amended by EU Commission Decision 2005/618/EC.  
This product contains lead in excess of the maximum concentration value allowed but is compliant by exemption under  
Item 6 of the Annex to the Directive.  
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of  
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless  
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information  
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.  
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3Ms entire liability and  
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.  
CHINA  
Appendix C1: China RoHS  
Electronic Industry Standard of the Peoples Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for  
Certain Hazardous Substances in Electronic Information Products.  
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means  
that the product or part does not contain any of the following substances in excess of the following maximum concentration  
values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls  
or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this  
information represents 3Ms best knowledge and belief based upon information provided by third party suppliers to 3M.  
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3Ms entire liability and  
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.  
Appendix C2: China RoHS  
Electronic Industry Standard of the Peoples Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for  
Certain Hazardous Substances in Electronic Information Products.  
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that  
the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration  
values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls  
or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this  
information represents 3Ms best knowledge and belief based upon information provided by third party suppliers to 3M.  
The numerical reference in the symbol above should not be construed as a representation regarding the products life or an  
extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with  
3M’s Regulatory Information Appendix, then 3Ms entire liability and Buyer’s exclusive remedy will be in accordance with the  
product Warranty stated below.  
RIA-2217A-D  
Appendix C3: China RoHS  
Electronic Industry Standard of the Peoples Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for  
Certain Hazardous Substances in Electronic Information Products.  
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that  
the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration  
values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls  
or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this  
information represents 3Ms best knowledge and belief based upon information provided by third party suppliers to 3M.  
The numerical reference in the symbol above should not be construed as a representation regarding the products life or an  
extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with  
3M’s Regulatory Information Appendix, then 3Ms entire liability and Buyers exclusive remedy will be in accordance with the  
product Warranty stated below.  
Important Notice  
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness  
is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated  
with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order  
shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.  
Warranty; Limited Remedy; Limited Liability.  
This product will be free from defects in material and manufacture for a period of 90 days from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING,  
BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty  
period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where  
prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the  
legal theory asserted.  
3M Electronic Solutions Division  
6801 River Place Blvd.  
Austin, TX 78726-9000  
U.S.A.  
1-800-225-5373  
www.3m.com/interconnects  
Please recycle. Printed in USA.  
© 3M 2008. All rights reserved.  
RIA-2217A-D  
3M is a trademark of 3M Company.  

相关型号:

SI9130DB

5- and 3.3-V Step-Down Synchronous Converters

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1-E3

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135_11

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9136_11

Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130CG-T1-E3

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130LG-T1-E3

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130_11

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137DB

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137LG

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9122E

500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification Drivers

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY