首页 |元器件品牌

MP2-H024-41P1-S-RF [3M]

Board Connector, 24 Contact(s), 4 Row(s), Male, Straight, Press Fit Terminal, ROHS COMPLIANT;
MP2-H024-41P1-S-RF
型号： MP2-H024-41P1-S-RF
厂家： 3M ELECTRONICS    3M ELECTRONICS
描述：

Board Connector, 24 Contact(s), 4 Row(s), Male, Straight, Press Fit Terminal, ROHS COMPLIANT
文件： 总5页 (文件大小：1074K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
3M™ MetPak™ 2-FB Header  
2 mm 4/5-Row, Vertical, Solder or Press-Fit Tail, Shouldered Pin  
MP2 Series  
Solder Tail  
•ꢀ End-to-endꢀstackable  
•ꢀ Selectꢀloadꢀcapability  
•ꢀ Monoblockable  
•ꢀ ShoulderꢀPin  
Press Fit  
•ꢀ End-to-endꢀstackable  
•ꢀ Earlyꢀmateꢀlateꢀbreakꢀforꢀhotꢀswappingꢀ(press-fitꢀEMLBꢀ  
adjustedꢀbyꢀapplicationꢀtooling)  
•ꢀ Selectꢀloadꢀcapability  
•ꢀ Monoblockable  
•ꢀ Push-onꢀshoulderꢀpin  
•ꢀ Optionalꢀfeed-throughꢀtailꢀforꢀrearꢀplug-upꢀmidplaneꢀ  
applications  
•ꢀ AcceptsꢀUniversalꢀTooling  
•ꢀ RoHSꢀCompliant.ꢀSeeꢀtheꢀRegulatoryꢀInformationꢀ  
Appendixꢀ(RIA)ꢀinꢀtheꢀ“RoHSꢀcompliance”ꢀsectionꢀofꢀꢀ  
www.3M.com/Interconnectsꢀforꢀcomplianceꢀinformationꢀ  
(RIAꢀE1ꢀ&ꢀC1ꢀapply)  
Date Modified: September 9, 2009  
TS-1120-C  
Sheet 1 of 4  
Physical  
Insulation:  
Material: High Temp LCP  
Flammability: UL 94V-0  
Color: Beige  
Color:  
Material:  
Phosphor Bronze  
Plating:  
Underplating: 50 μ” [1.27 μm] Nickel  
WipingArea: See Ordering Information  
Solder Tails: See Ordering Information  
Electrical  
Current Rating: Signal: 1.5A -All contacts simultaneously  
103 MΩ  
Insulation Resistance:  
Withstanding Voltage: 1,000V  
AC  
Environmental  
Temperature Rating: -55°C to +125°C  
Process Temperature Rating: 260°C (Profile per J-STD-020C)  
Moisture Sensitivity Level: 1 (per J-STD-020C)  
ULꢀFileꢀNo.:ꢀE68080  
3M is a trademark of 3M Company.  
For technical, sales or ordering information call  
800-225-5373  
3
Electronic Solutions Division  
Interconnect Solutions  
http://www.3M.com/interconnects/  
3M™ MetPak™ 2-FB Header  
2 mm 4/5-Row, Vertical, Solder or Press-Fit Tail, Shouldered Pin  
MP2 Series  
POSITION X  
2.00  
.079  
6.00  
"A"  
.236  
POSITION 2  
POSITION 1  
15.80  
.622  
11.50  
.453  
1.40  
.055  
2.00  
.079  
FOR SPECIAL MONOBLOCKS  
AND PIN ARRANGEMENTS  
CONTACT 3M SALES  
17.00  
.669  
REPRESENTATIVE  
mm  
[inch]  
3.50  
.138  
Tolerance Unless Noted  
12.00  
0
0.0  
0.00  
.472  
mm  
±3  
±0.3 ±0.13  
4 ROW PRODUCT  
[ ] Dimensions for Reference Only  
17.80  
.701  
13.52  
.532  
MATING LENGTH  
"B" TAIL LENGTH  
14.00  
.551  
"C"  
A
D C B  
E
ROW  
SOLDER TAIL  
PRODUCT  
PRESS-FIT  
PRODUCT  
PRESS-FIT  
PRODUCT  
REAR  
5 ROW PRODUCT  
PLUG-UP  
Note:  
1. Refer to IEC 61076-4-104 Futurebus+® global standard.  
2. “Press Fit” describes a contact tail having a compliant section designed to make a reliable electrical connection with a  
plated through-hole (PTH) in a printed circuit board, typically a “back plane.”  
Ordering Information  
MP2 - HXXX - XXXX - S - XXXXX  
Plating Options:  
(See Table 4)  
H = Header  
Pin Count  
Shouldered Pins  
(See Table 1)  
Rows  
4 = 4 Rows  
5 = 5 Rows  
Tail Length  
(See Table 3)  
Loading Pattern  
(See Table 2)  
Termination Style  
P = Press-Fit  
TS-1120-C  
Sheet 2 of 4  
S = Solder Tail  
3M is a trademark of 3M Company.  
3
For technical, sales or ordering information call  
Electronic Solutions Division  
Interconnect Solutions  
800-225-5373  
http://www.3M.com/interconnects/  
3M™ MetPak™ 2-FB Header  
2 mm 4/5-Row, Vertical, Solder or Press-Fit Tail, Shouldered Pin  
MP2 Series  
Table 1 - Connector & Row Lengths  
Table 4 - Plating Options  
Pin  
Count  
Dim. “A”  
mm [inch]  
Dim “C”  
mm [inch]  
Rows  
Plating Press-Fit Solder  
Plating Composition  
Suffix  
Tails*  
Tails  
0.25 μm [10 μ”] Min. Au Contact Area  
2.54 μm [100 μ”] Min. SnPb Tail Area  
1.27 μm [50 μ”] Min. Ni all over  
024  
048  
072  
096  
120  
144  
168  
192  
030  
060  
090  
120  
150  
180  
210  
240  
11.95 [0.471]  
23.95 [0.943]  
35.95 [1.415]  
47.95 [1.889]  
59.95 [2.36]  
71.95 [2.833]  
83.95 [3.305]  
95.95 [3.778]  
11.95 [0.471]  
23.95 [0.943]  
35.95 [1.415]  
47.95 [1.888]  
59.95 [2.361]  
71.95 [2.833]  
83.95 [3.305]  
95.95 [3.778]  
10.00 [0.394]  
22.00 [0.866]  
34.00 [1.339]  
46.00 [1.811]  
58.00 [2.283]  
70.00 [2.756]  
82.00 [3.228]  
94.00 [3.701]  
10.00 [0.394]  
22.00 [0.866]  
34.00 [1.339]  
46.00 [1.811]  
58.00 [2.283]  
70.00 [2.756]  
82.00 [3.228]  
94.00 [3.701]  
4
4
4
4
4
4
4
4
5
5
5
5
5
5
5
5
(RIA E2 &  
C2 apply)  
(RIA E3 &  
C2 apply)  
TG  
0.76 μm [30 μ”] Min. Au Contact Area  
2.54 μm [100 μ”] Min. SnPb Tail Area  
1.27 μm [50 μ”] Min. Ni all over  
(RIA E2 &  
C2 apply)  
(RIA E3 &  
C2 apply)  
TG30  
TR30  
0.08 μm [3 μ”] Min. Au Contact Area  
0.67 μm [27 μ”] Min. PdNi Contact Area  
2.54 μm [100 μ”] Min. SnPb Tail Area  
1.27 μm [50 μ”] Min. Ni all over  
(RIA E2 &  
C2 apply)  
(RIA E3 &  
C2 apply)  
0.13 μm [5 μ”] Min. Hard Au Contact Area,  
Lubricated  
1.02 μm [40 μ”] Min. PdNi Contact Area  
0.10 μm [4 μ”] Min. Pd Contact Area  
2.54 μm [100 μ”] Min. SnPb Tail Area  
1.27 μm [50 μ”] Min. Ni all over  
(RIA E2 &  
C2 apply)  
(RIA E3 &  
C2 apply)  
TR40B  
0.25 μm [10 μ”] Min. Au Contact Area  
5.08 μm [200 μ”] Min. Matt Whisker Mitigating  
Sn Tail Area  
(RIA E1 &  
C1 apply)  
(RIA E1 &  
C1 apply)  
FJ  
1.27 μm [50 μ”] Min. Ni all over  
0.76 μm [30 μ”] Min. Au Contact Area  
5.08 μm [200 μ”] Min. Matt Whisker Mitigating  
Sn Tail Area  
(RIA E1 &  
C1 apply)  
(RIA E1 &  
C1 apply)  
KR  
1.27 μm [50 μ”] Min. Ni all over  
1.27 μm [50 μ”] Min. Au Contact Area, Lubri-  
cated  
5.08 μm [200 μ”] Min. Matt Whisker Mitigating  
Sn Tail Area  
(RIA E1 &  
C1 apply)  
(RIA E1 &  
C1 apply)  
RF  
LR  
1.27 μm [50 μ”] Min. Ni all over  
0.08 μm [3 μ”] Min. Au Contact Area  
0.67 μm [27 μ”] Min. PdNi Contact Area  
5.08 μm [200 μ”] Min. Matt Whisker Mitigating  
Sn Tail Area  
Table 3 - Tail Length Options  
Termination Option No. Dim. “B”  
(RIA E1 &  
C1 apply)  
(RIA E1 &  
C1 apply)  
Solder Tail  
Press-Fit* Tail  
1.27 μm [50 μ”] Min. Ni all over  
0.13 μm [5 μ”] Min. Hard Au Contact Area,  
Lubricated  
1.02 μm [40 μ”] Min. PdNi Contact Area  
0.10 μm [4 μ”] Min. Pd Contact Area  
5.08 μm [200 μ”] Min. Matt Whisker Mitigating  
Sn Tail Area  
1
2
3
1
4.60 [0.181]  
3.53 [0.139]  
2.72 [0.107]  
13.60 [0.535]  
17.00 [0.669]  
(RIA E1 &  
C1 apply)  
(RIA E1 &  
C1 apply)  
PD  
5 (Contact 3M)  
7 (Contact 3M)  
0.76 μm [30 μ”] Min. Au Dual Contact Areas  
0.10 μm [4 μ”] Min. Au Needle Eye  
1.27 μm [50 μ”] Min. Ni all over  
(RIA E1 &  
C1 apply)  
(RIA E1 &  
C1 apply)  
KV  
*Compliant-Pin Tail  
Table 2 - Mate Length vs. Loading Pattern  
Mate length  
Row E  
(5-Row Prod. Only)  
Loading Pattern  
Code  
Mate length  
Row A  
Mate length  
Row B  
Mate length  
Row C  
Mate length  
Row D  
Description  
1
2
3
All Positions Filled  
All Positions Filled  
All Positions Filled  
5.00 [0.197]  
6.50 [0.256]  
6.50 [0.256]  
5.00 [0.197]  
5.00 [0.197]  
5.75 [0.226]  
5.00 [0.197]  
5.00 [0.197]  
5.75 [0.226]  
5.00 [0.197]  
5.00 [0.197]  
6.50 [0.256]  
5.00 [0.197]  
5.00 [0.197]  
6.50 [0.256]  
4
5
All Positions Filled  
All Positions Filled  
All Positions Filled  
All Positions Filled  
All Positions Filled  
All Positions Filled  
All Positions Filled  
All Positions Filled  
All Positions Filled  
All Positions Filled  
All Positions Filled  
All Positions Filled  
All Positions Filled  
All Positions Filled  
All Positions Filled  
6.50 [0.256]  
5.75 [0.226]  
7.25 [0.285]  
6.50 [0.256]  
6.50 [0.256]  
5.00 [0.197]  
5.00 [0.197]  
5.75 [0.226]  
5.00 [0.197]  
5.75 [0.226]  
7.25 [0.285]  
7.25 [0.285]  
5.00 [0.197]  
8.00 [0.315]  
5.00 [0.197]  
6.50 [0.256]  
7.25 [0.285]  
5.75 [0.226]  
5.75 [0.226]  
5.00 [0.197]  
6.50 [0.256]  
5.75 [0.226]  
5.75 [0.226]  
5.00 [0.197]  
5.75 [0.226]  
7.25 [0.285]  
5.75 [0.226]  
5.75 [0.226]  
8.00 [0.315]  
6.50 [0.256]  
6.50 [0.256]  
5.75 [0.226]  
5.75 [0.226]  
5.00 [0.197]  
6.50 [0.256]  
5.00 [0.197]  
6.50 [0.256]  
5.75 [0.226]  
6.50 [0.256]  
7.25 [0.285]  
7.25 [0.285]  
5.75 [0.226]  
5.75 [0.226]  
8.00 [0.315]  
7.25 [0.285]  
6.50 [0.256]  
5.75 [0.226]  
5.75 [0.226]  
5.00 [0.197]  
6.50 [0.256]  
5.00 [0.197]  
5.75 [0.226]  
5.75 [0.226]  
5.00 [0.197]  
5.75 [0.226]  
7.25 [0.285]  
5.00 [0.197]  
7.25 [0.285]  
8.00 [0.315]  
6.50 [0.256]  
6.50 [0.256]  
5.75 [0.226]  
5.75 [0.226]  
5.00 [0.197]  
6.50 [0.256]  
5.00 [0.197]  
5.00 [0.197]  
5.75 [0.226]  
5.00 [0.197]  
5.75 [0.226]  
7.25 [0.285]  
5.00 [0.197]  
7.25 [0.285]  
6
7
8
9
A
B
C
D
E
G
H
J
8.00 [0.315]  
TS-1120-C  
Sheet 3 of 4  
K
5.00 [0.197]  
3M is a trademark of 3M Company.  
For technical, sales or ordering information call  
800-225-5373  
3
Electronic Solutions Division  
Interconnect Solutions  
http://www.3M.com/interconnects/  
3M™ MetPak™ 2-FB Header  
2 mm 4/5-Row, Vertical, Solder or Press-Fit Tail, Shouldered Pin  
MP2 Series  
12.00  
.472  
16.00  
.630  
MIN  
1
6
. 0  
0
M
I N  
. 6 3 0  
2.00  
.079  
2.00  
.079  
A1  
12.00  
.472  
"C"  
"D" PLATED THRU HOLE  
12.00  
.472  
Ø
0.10  
2.00  
.079  
CENTER HOLES OPTIONAL  
FOR 3M PRODUCT  
6.00  
.236  
+.10  
1.50  
.059  
-.00  
Ø
UNPLATED  
0.10  
+.004  
-.000  
" D  
"
P
L
A
T
E
D
T
H
R
U
H
O
L E  
Ø
0
. 1  
0
Ø
RECOMMENDED 4 ROW SOLDER  
TAIL PCB HOLE MOUNTING PATTERN  
RECOMMENDED 4 ROW PRESS-FIT  
Table 5 -- HOLE PLATING For TG, TG30, TR30, TR40B FINISHES ONLY  
HOLE  
Finished Dia. mm [in]  
Cu Thickness mm [in] SnPb Thickness microns [μ”]  
0.025 [.001] min. 15 [600] max.  
Drilled Hole Dia. mm [in]  
“D”  
0.65-0.80 [.0256-.0315]  
0.81-0.86 [.0319-.0339]  
Table 6 -- HOLE PLATING For FJ, KR, RF, LR, and PD FINISHES ONLY  
Immersion  
Electrolitic Au OSP ENTEK  
Finished Dia.  
mm [in]  
Cu Thickness  
mm [in]  
Matte Sn  
Thickness  
microns [μ”]  
Drilled Hole Dia.  
mm [in]  
Hole  
Thickness  
Thickness  
microns [μ”]  
microns [μ”]  
“D”  
0.700-0.800  
[.0276-.0315]  
0.025-0.045  
[0.001-0.002]  
0.5 - 2.5  
[20 - 100]  
0.1 - 0.5  
[4 - 20]  
0.2 - 0.5  
[8 - 20]  
0.830-0.860 [.0330-.0340] or  
0.85mm [ #66] TWIST DRILL  
18.00  
MIN  
14.00  
.551  
"D " PL A T E D T HR U HO L E  
.709  
Ø
0 .10  
6.00  
.236  
2.00  
.079  
2.00  
.079  
A1  
12.00  
.472  
"C"  
12.00  
.472  
"D" PLATED THRU HOLE  
Ø 0.10  
2.00  
.079  
+.10  
1.50  
.059  
CENTER HOLES OPTIONAL  
FOR 3M PRODUCT  
18 .0 0  
M IN  
-.00  
Ø
UNPLATED  
0.10  
+.004  
-.000  
.70 9  
Ø
RECOMMENDED 5 ROW SOLDER  
TAIL PCB HOLE MOUNTING PATTERN  
RECOMMENDED 5 ROW PRESS-FIT  
PCB HOLE MOUNTING PATTERN  
TS-1120-C  
Sheet 4 of 4  
3M is a trademark of 3M Company.  
For technical, sales or ordering information call  
800-225-5373  
3
Electronic Solutions Division  
Interconnect Solutions  
http://www.3M.com/interconnects/  
Important Notice  
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness  
is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated  
with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order  
shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.  
Warranty; Limited Remedy; Limited Liability.  
This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3M MAKES NO OTHER WARRANTIES  
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the  
warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except  
where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of  
the legal theory asserted.  
3M Electronics Solutions Division  
6801 River Place Blvd.  
Austin, TX 78726-9000  
U.S.A.  
1-800-225-5373  
www.3m.com/interconnects  
Please recycle. Printed in USA.  
© 3M 2008. All rights reserved.  
RIA-2217B-E  
3M is a trademark of 3M Company.  

相关型号：

SI9130DB

 5- and 3.3-V Step-Down Synchronous Converters

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1-E3

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135_11

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9136_11

 Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130CG-T1-E3

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130LG-T1-E3

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130_11

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137DB

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137LG

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9122E

 500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification Drivers

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明