MP2-S060-51M1-C-TG30 [3M]
60 CONTACT(S), FEMALE, RIGHT ANGLE TWO PART BOARD CONNECTOR, SOLDER, SOCKET;型号: | MP2-S060-51M1-C-TG30 |
厂家: | 3M ELECTRONICS |
描述: | 60 CONTACT(S), FEMALE, RIGHT ANGLE TWO PART BOARD CONNECTOR, SOLDER, SOCKET PC 连接器 |
文件: | 总5页 (文件大小:330K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
3M™ MetPak™ 2-FB Socket
2 mm 4/5-Row, Solder Tail or Press-Fit With Tail Cover, RightAngle
MP2 Series
• End-to-end stackable
• Offset dual-beam contact minimizes insertion force
• Expanded pin counts
• Protective Push-Cap
• Monoblockable
• Press or heat stake peg
• 12 mm modular units
• Meets global IEC 61076-4-104 Futurebus+® standard
• See the Regulatory InformationAppendix (RIA)
in the “RoHS compliance” section of
www.3Mconnectors.com for compliance
information (RIA E1 & C1 apply)
Date Modified: September 17, 2013
TS-1115-D
Sheet 1 of 4
Physical
Insulation:
Material: High Temp LCP
Flammability: UL 94V-0
Color: Beige
Contact:
Material:
CopperAlloy
Plating:
Underplating: 50 μ” (1.27 μm) Nickel
WipingArea: See Ordering Information
Solder Tails: See Ordering Information
Electrical
Signal: 1.5A -All contacts simultaneously
Current Rating:
103 MΩ
Insulation Resistance:
Withstanding Voltage:
1,000V
AC
Environmental
-55° C to 125° C
Temperature Rating:
260°C (Profile per J-STD-020C)
1 (per J-STD-020C)
Process Temperature Rating:
Moisture Sensitivity Level:
MetPak is a trademark of 3M Company.
Futurebus+ is a registered trademark of the Institute of Electrical and Electronic Engineers, Inc. (IEEE)
UL File No.: E68080
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnectors.com
3M™ MetPak™ 2-FB Socket
2 mm 4/5-Row, Solder Tail or Press-Fit With Tail Cover, RightAngle
MP2 Series
21.0
.83
12.45
.490
"A"
1.00
.039
9.30
.366
11.80
.465
"C" TAIL LENGTH
13.50
.531
X
1
2
2.00
6.00
.236
.079
"D" POST LENGTH
TYP.
2.00
.079
TYP.
"B"
4 ROW PRODUCT
23.0
.91
12.45
.490
ROW
mm
(Inch)
E
11.30
.445
D
C
B
Tolerance Unless Noted
13.80
.543
0
3
0.0
0.3
0.00
0.13
FOR SPECIAL MONOBLOCKS
CONTACT 3M SALES
mm
A
( ) Dimensions used for
Reference Only
REPRESENTATIVE
1.00
.039
5 ROW PRODUCT
8.00
.315
Note:
1. Refer to IEC 61076-4-104 Futurebus+® global standard.
2. “Press Fit” describes a contact tail having a compliant section designed to make a reliable electrical connection with a plated
through-hole (PTH) in a printed circuit board, typically a “back plane.”
Ordering Information
MP2 - SXXX - X1XX - X - XXXX
Plating Options:
(See Table 3)
Contact Count
(See Table 1)
C = Capped Solder Tail
Blank = Press-Fit
Termination Style
Tail Length
Rows
M = Solder Tail (Press Peg)
(press peg requiring arbor press for PCB assembly)
(Contact 3M Sales Rep)
(See Table 2)
4 = 4 Rows
5 = 5 Rows
P = Press Fit (w/ Tail Cover)
TS-1115-D
Sheet 2 of 4
3M is a trademark of 3M Company.
3
For technical, sales or ordering information call
Electronic Solutions Division
Interconnect Solutions
800-225-5373
http://www.3Mconnectors.com
3M™ MetPak™ 2-FB Socket
2 mm 4/5-Row, Solder Tail or Press-Fit With Tail Cover, RightAngle
MP2 Series
Table 1 - Connector & Row Lengths
Pin
Count
Dim “A”
mm (Inch)
Dim “B”
mm (Inch)
Block
Count
Rows
024
048
072
096
120
144
168
192
030
060
090
120
150
180
210
240
11.95
[0.471]
[0.943]
[1.415]
[1.889]
[2.36]
10.00 [0.394]
22.00 [0.866]
34.00 [1.339]
46.00 [1.811]
58.00 [2.283]
70.00 [2.756]
82.00 [3.228]
94.00 [3.701]
10.00 [0.394]
22.00 [0.866]
34.00 [1.339]
46.00 [1.811]
58.00 [2.283]
70.00 [2.756]
82.00 [3.228]
94.00 [3.701]
4
4
4
4
4
4
4
4
5
5
5
5
5
5
5
5
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
23.95
35.95
47.95
59.95
71.95
83.95
95.95
11.95
23.95
35.95
47.95
59.95
71.95
83.95
95.95
[2.833]
[3.305]
[3.778]
[0.471]
[0.943]
[1.415]
[1.888]
[2.361]
[2.833]
[3.305]
[3.778]
Table 2 - Tail & Post Lengths
Contact-to-PC
Board Tail Termina-
tion Option No.
Dim “C”
Dim. “D”
Solder
M1
Press-Fit*
2.72 [0.107]
3.53 [0.139]
3.57 [0.141]
3.57 [0.141]
M2
P1
*Compliant-Pin Tail
Table 3 - Plating
Plating Suffix
KR
Press-Fit Tails*
Solder Tails
Plating Composition
(RIA E1 & C1 apply)
(RIA E1 & C1 apply)
0.76 μm [30 μ”] Min. Au Contact Area
2.54 μm [100 μ”] Min. Matt Whisker Mitigating Sn Tail Area
1.27 μm [50 μ”] Min. Ni all over
LR
(RIA E1 & C1 apply)
(RIA E1 & C1 apply)
0.08 μm [3 μ”] Min. Au Contact Area
0.67 μm [27 μ”] Min. PdNi Contact Area
2.54 μm [100 μ”] Min. Matt Whisker Mitigating Sn Tail Area
1.27 μm [50 μ”] Min. Ni all over
*Compliant-Pin Tail
TS-1115-D
Sheet 3 of 4
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnectors.com
3M™ MetPak™ 2-FB Socket
2 mm 4/5-Row, Solder Tail or Press-Fit With Tail Cover, RightAngle
MP2 Series
6.00
.236
2.00
3X
.079
THESE HOLES CONSTITUTE MODULAR
REPEATING PATTERN
4.00
.157
2.00
.079
TYP.
1.00
.039
A1
4.00
.157
12.00
.472
"B"
+.05
2.05
-.00
0.10
Ø
Ø
+.002
-.000
.081
UNPLATED THROUGH-HOLE
+.10
2.00
.079
4X
1.50
.059
-.00
“D” PLATEDTHROUGH-HOLE
Ø 0.10
Ø 0.10
Ø
+.004
-.000
8.00
.315
3.00
.118
UNPLATED THROUGH-HOLE
RECOMMENDED 4 ROW PCB HOLE
MOUNTING PATTERN
RECOMMENDED 5 ROW PCB HOLE
MOUNTING PATTERN
Table 4: HOLE PLATING FINISHES
HOLE Finished Dia. Cu Thickness Immersion Matte Sn Electrolitic Au
OSP ENTEK
Thickness
microns [μ”]
Drilled Hole Dia.
mm [in]
mm [in]
mm [in]
Thickness
Thickness
microns [μ”]
microns [μ”]
“D”
0.700-0.800
[.0276-.0315]
0.025-0.045
[0.001-0.002]
0.5 - 2.5
[20 - 100]
0.1 - 0.5
[4 - 20]
0.2 - 0.5
[8 - 20]
0.830-0.860 [.0330-.0340] or
0.85mm [ #66 ] TWIST
DRILL
TS-1115-D
Sheet 4 of 4
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnectors.com
3M is a trademark of 3M Company.
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable,
but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for
your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are
not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or effect
unless expressly agreed upon, in writing, by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3M MAKES
NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s
option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will
not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of
the legal theory asserted.
3
3M Electronics Solutions Division
6801 River Place Blvd.
Austin, TX 78726-9000
U.S.A.
1-800-225-5373
www.3Mconnectors.com
Please recycle. Printed in USA.
© 3M 2013. All rights reserved.
RIA-2217B-E
相关型号:
MP2-S060-51S1-TR30
HEADER CONNECTOR,PCB MNT,PLUG,60 CONTACTS,SKT,0.079 PITCH,R ANGLE PC TAIL TERMINAL
3M
MP2-S060-51S2-TR30
HEADER CONNECTOR,PCB MNT,PLUG,60 CONTACTS,SKT,0.079 PITCH,R ANGLE PC TAIL TERMINAL
3M
MP2-S060G-51M1-C-FJ
Board Connector, 60 Contact(s), 5 Row(s), Female, Right Angle, Solder Terminal, Socket, ROHS COMPLIANT
3M
MP2-S060G-51M1-C-KR
60 CONTACT(S), FEMALE, RIGHT ANGLE TWO PART BOARD CONNECTOR, SOLDER, SOCKET, ROHS COMPLIANT
3M
MP2-S060G-51M1-C-LR
60 CONTACT(S), FEMALE, RIGHT ANGLE TWO PART BOARD CONNECTOR, SOLDER, SOCKET, ROHS COMPLIANT
3M
©2020 ICPDF网 联系我们和版权申明