MU10-250DM [3M]

COPPER ALLOY, TIN FINISH, TAB TERMINAL;


型号：	MU10-250DM
厂家：	3M ELECTRONICS
描述：	COPPER ALLOY, TIN FINISH, TAB TERMINAL 端子和端子排
文件：	总2页 (文件大小：18K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Scotchlok^™Terminals

MU18-250DM, MU14-250DM, MU10-250DM

W´

Male Disconnect, Non-Insulated, Butted Seam

Data Sheet

Wire

Range

(AWG)

Male Tab

Width (W´ )

x Thickness

Barrel

Length

Barrel

I.D.

Product Number

MU18-250DM

MU14-250DM

MU10-250DM

22-18

16-14

12-10

0.250 x 0.032

0.73

0.75

0.25

0.065

0.085

0.150

Installation Information

ꢀWARNING

UNDERWRITERS

Turn power off before installing or removing terminal. All electrical

work should be done according to appropriate electrical codes.

CANADIAN STANDARDS

ASSOCIATION

LABORATORIES

STANDARD NO. UL 310

3M FILE NO. E70512

STANDARD NO. C22.2

NO. 153

3M FILE NO. LR22190

UL Listed and CSA Certified for use on stranded copper

(AWG) wire only.

Strip away the end 3/8 inch of wire insulation.

Make the crimp in the proper station of a recommended

3M crimp tool: TH-440, TH-450 (scissor style), or

TR-490 (ratchet style) hand tools.

Specifications

Wire Size:

See Table Above

Butted

Barrel Seam:

Maximum Voltage Rating:

600 V Building Wire

1000 V Signs or

Fixtures (Luminaires)

Same as Wire

ETP Copper

Barrel Crimp (Required)

Maximum Current:

Terminal Material:

Plating:

Tin

Suitable for factory application on steel or brass tabs UL

or CSA.

Suitable for field application on brass tabs, strain relief

required, UL only.

Engineering Specification

Crimp-Type Male Quick Disconnect shall, electrically The Male Quick Disconnect shall be tin plated 0.032˝

and mechanically connect permanently to a

thick copper, with a 0.250˝ blade conforming to

ANSI/NEMA DC-2 dimensions and a 0.25˝ long

barrel and sized for a specified (AWG) wire range

(22-18, 16-14, 12-10).

prestripped end of a stranded copper wire and, have a

flat rectangular tongue portion for mating to a Female

Quick Disconnect in a separable, reusable manner,

forming a Quick Connect Wiring Connection.

Connectors shall be UL Listed and CSA Certified for

600 volts maximum, building wire: 1000 volts

maximum, signs and fixtures (luminaires).

The connector line shall offer tongue variations (size

0.250 x 0.032 or 0.187 x 0.020 per ANSI/NEMA

DC-2) and barrel variations in wire size 22-18 AWG,

16-14 AWG, 12-10 AWG and construction of non-

insulated, vinyl insulated, nylon fully insulated, etc.

Quick Disconnect connectors shall be suitable for field

or factory wiring, with a UL Recognized strain relief

required.

The Quick Disconnect shall have regulatory agency

coverage (UL Listing, CSA Certification). The tongue

shall be marked with the wire range and the

manufacturer’s symbol.(ꢀ)

3M and Scotchlok are trademarks of 3M.

is a trademark of Underwriters Laboratories.

is a trademark of Canadian Standards Association.

IMPORTANT NOTICE

Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability

associated with such use.

Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture as of the date of

purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above,

your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except

where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether direct, indirect,

special, incidental or consequential regardless of the legal theory asserted.

Electrical Products Division

6801 River Place Blvd.

Austin, TX 78726-9000

http://www.3M.com/elpd

Litho in USA.

相关型号：