030819 [AAVID]

Heat Sink;


型号：	030819
厂家：	AAVID THERMALLOY, LLC
描述：	Heat Sink
文件：	总6页 (文件大小：3130K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

BGA HEAT SINK GUIDE

FOR NETWORKING AND COMPUTER PCBS

T H E R M A L P R O D U C T S, I N C.

BGA HEAT SINK GUIDE - POWER LESS THAN 5 WATTS

Aavid’s family of BGA heat sinks offers a wide range of cooling solutions for motherboard, video card,

and networking applications. Aavid's Push-Pin™ attachment, available on many of the heat sinks, uses

a standard 3.12 mm diameter hole pattern, allowing accommodation of future cooling requirements

without board redesign. Plastic pins provide low-cost attachment, while brass pins provide higher

reliability in extreme conditions.

ORDERING INFORMATION

Use the 6 digit part number in the upper left hand corner for ordering.

Thermal resistance is calculated at .25 m/s of airflow and does not include the interface. Due to

various heat dissipation paths within a BGA device, please test our heat sink in your application.

For different interface material, fan options, color, or clipping variations, please contact your local

application engineer.

PART NUMBER 028095 (373224M00000)

• 28 mm x 28 mm x 6 mm

• Use with epoxy attachment

28.0

• 15.2°C/W performance

• Green anodized finish

28.0

6.0

PART NUMBER 031612 (IBAA-2)

• 28 mm x 28 mm x 8 mm

• Use with epoxy attachment

• 13.5°C/W performance

• Wash finish

28.0

8.0

PART NUMBER 030948 (10-6326-27) PLASTIC PUSH-PINS

030949 (10-6326-28) BRASS PUSH-PINS

• 28 mm x 28 mm x 6 mm

• Push-Pin attachment

• 15.0°C/W performance

• Pre-applied phase-change

interface material

28.0

• Black anodized finish

6.0

BGA HEAT SINK GUIDE - POWER LESSTHAN 8 WATTS

PART NUMBER 031609 (10-6327-01) PLASTIC PUSH-PINS

• 28 mm x 28 mm x 10 mm

• Push-Pin attachment

• 12.4°C/W performance

• Black anodized finish

28.0

10.0

PART NUMBER 031611 (10-5571-02) DOUBLE-SIDEDTAPE

028096 (373324M00000) NO INTERFACE FOR EPOXY ATTACHMENT

• 37.4 mm x 37.4mm x 6 mm

• 11.2°C/W performance

• Green anodized finish

37.4

6.0

PART NUMBER 031610 (10-5610-02)

• 37.4mm x 37.4mm x 8.5 mm

• Unique clip attachment

• 11.2 °C/W performance

• Green anodized finish

37.4

8.5

BGA HEAT SINK GUIDE - POWER LESSTHAN 10 WATTS

PART NUMBER 031613 (10-5597-02) PLASTIC PUSH-PIN, NO INTERFACE MATERIAL

APPLIED 031614 (10-5597-22) PLASTIC PUSH-PIN, PHASE-CHANGE INTERFACE

APPLIED 031615 (10-5597-33) BRASS PUSH-PIN, PHASE-CHANGE INTERFACE APPLIED

• 37.4 mm x 37.4 mm x 6 mm

• Push-Pin attachment

• 11.0°C/W performance

• 031613 has green anodized finish

• 031614 and 031615 have gold

anodized finishes

37.4

6.0

PART NUMBER 030818 (10-5607-04) PLASTIC PUSH-PIN

030819 (10-5607-05) BRASS PUSH-PIN

• 37.4 mm x 37.4mm x 10 mm

• 9.7°C/W performance

• Black anodized finish

• Phase-change interface

material: 28 mm x 28 mm

37.4

10.0

PART NUMBER 031746 SINGLE-BALL FAN, DOUBLE-SIDEDTAPE

• 40 mm x 40 mm x 11.5 mm

• 5-Volt, 40 mm x 40 mm x

7 mm DC fan

40.0

• 3-Pin connector: 1-red(+),

2-black(-), 3-sensor

38.7

• Sensor provides two pulses

per revolution

• 3.8°C/W performance

11.5

• Black anodized finish

Note: All Aavid fans can be customized to your application.

Customizable features include: fan wiring, fan speed, sensor options,

bearing style, voltage, connector type, etc.

Contact your local application engineer for information.

BGA HEAT SINK GUIDE - PO W ER LESS THAN 15 W ATTS

PART NUMBER 031608 (11-5602-48) SINGLE-BALL FAN

031607 (11-5602-47) DUAL-BALL FAN

• 40 mm x 40 mm x 15 mm

• 5-Volt, 40 mm x 40 mm x10 mm

DC fan

40.0

• 3-pin Molex connector:

1-red(+), 2-black(-), 3-sensor

• 1-black(-), 2-red(+), 3-sensor

15.0

• 3.5°C/W performance

• Black anodized finish

37.4

PART NUMBER 031606 (11-5602-46) SINGLE-BALL FAN

031605 (11-5602-45) DUAL-BALL FAN

• Plastic Push-Pin

• 40 mm x 40 mm x 15.0 mm

• 5 Volt 40 mm x 40 mm x

10 mm DC fan

• 3-pin Molex connector:

1-black(-), 2-red(+), 3-sensor

40.0

• Sensor is two pulses per

revolution

15.0

• 3.4C°/W performance

• Black anodized finish

PART NUMBER 031660 (11-5602-50) PLASTIC PUSH-PIN

031661 (11-5602-51) BRASS PUSH-PIN

• One ball bearing

• 40 mm x 40 mm x 11.5 mm

• 12 Volt DC fan

• 2-pin Molex connector:

1-red(+), 2-black(-)

• Phase-change interface material

37.4

• 3.7°C/W performance

• Black anodized finish

11.5

BGA HEAT SINK GUIDE - POWER LESS THAN 15 WATTS

PART NUMBER 031659 (11-5608-13) PLASTIC PUSH-PIN

031658 (11-5608-07) BRASS PUSH-PIN

• 40 mm x 40 mm x 11.5 mm

• 12Volt, 40 mm x 40 mm x

7 mm DC fan

• 3-pin Molex connector:

1-red(+), 2-black(-), 3-sensor

• Sensor provides two pulses

per revolution

20.0 41.4

• 3.5 °C/W performance

45.2

50.8

• Black anodized finish

11.5

Note: Aavid has several passive heat sinks using this alternate

Push-Pin hole pattern.Contact your local application engineer

for information.

T H E R M A L P R O D U C T S, I N C.

This data sheet represents only one of a broad range of products we make to cool electronics. Our representatives can help you configure a

complete cooling solution for your individual applications. For assistance, contact any one of them from our web site or at the locations below.

Aavid Thermal Products, Inc., along with Fluent Inc.’s Icepak thermal design software and Applied Thermal Technologies, Inc. thermal design and validation services, make up

The Total Integrated Solution for Cooling Electronics™. For more information on how to put our strengths to work for you,

visit our web site at: http://www.aavid.com;TEL: (603) 224-9988,

or contact Fluent at: http://www.icepak.com;TEL: (603) 643-2600, or Applied at: http://www.thermalcooling.com;TEL: (603) 666-4100.

For technical assistance, or placing an order, please visit our web site for the

local sales representative: http://www.aavid.com/reps/index.html

or distributor near you: http://www.aavid.com/distribs/index.html

Corporate Office - Aavid USA: 143 N. Main Street, Concord, NH 03301 TEL: (603) 224-9988 FAX: (603) 223-1738

International Locations:

Aavid Canada: 440 Hanlon Road • Woodbridge, Ontario • Canada L4L 3P6 • TEL: (905) 850-9595 • FAX: (905) 850-9599

Aavid Singapore: No. 5 Woodlands Industrial Park E1 757728 • TEL: (65)362 8388 • FAX: (65)362 8588

AavidTaiwan/Japan: 3F, No. 25, Lane 228, AnKang Road, NeiHu,Taipei •114 Taiwan R.O.C. • TEL: (886) 22-793-5677 • FAX: (886) 22-793-3460

Aavid Europe: Unit C Hillbottom Road • Sands Industrial Estate • High Wycombe, Bucks, England HP12 4HS • TEL: (44) 1494-474747 • FAX: (44) 1494-474748

PLEASE NOTE: Our customers are reminded that they bear the responsibility for testing Aavid Thermal Products’ products for proposed use.Any information furnished by Aavid is believed to be accurate and

reliable, but our customers must bear all responsibility for use and applications of Aavid products.AAVID MAKES NO WARRANTIES AS TO THE FITNESS, MERCHANTABILITY, OR SUITABILITY OF ANY

AAVID PRODUCTS FOR ANY SPECIFIC OR GENERAL USES.AAVID SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY KIND. All Aavid products are sold pursuant

to the Aavid Domestic Terms and Conditions of Sale in effect from time to time, a copy of which shall be furnished upon request (8911A).

Push-Pin is a trademark of Aavid Thermal Products, Inc.

All icons, drawings, illustrations, and trademarks are the property of Aavid Thermal Products, Inc. and may not be reproduced without express written permission.

相关型号：