S-1137A22-I6T2U_技术文档

S-1137 Series

5.5 V INPUT, 300 mA VOLTAGE REGULATOR

WITH SOFT-START FUNCTION

www.ablic.com

Rev.2.2_00

The S-1137 Series, developed using the CMOS technology, is a positive voltage regulator IC which has the low dropout

voltage, the high-accuracy output voltage and the soft-start function (300 mA output current).

A 1.0 μF small ceramic capacitor can be used. It operates with low current consumption of 45 μA typ.

The overcurrent protection circuit prevents the load current from exceeding the current capacity of the output transistor.

The ON / OFF circuit ensures longer battery life.

Compared to the conventional CMOS technology regulator ICs, various capacitors including small ceramic capacitors can be

used for this IC.

Furthermore, small SOT-89-5, SOT-23-5, and SNT-6A(H) packages realize high-density mounting.

 Features

• Output voltage:

• Input voltage:

1.2 V to 3.5 V, selectable in 0.05 V step

1.7 V to 5.5 V

• Output voltage accuracy:

• Dropout voltage:

• Current consumption:

1.0% (1.2 V to 1.45 V output product : 15 mV)

210 mV typ. (2.8 V output product, I_OUT= 300 mA)

During operation:

During power-off:

45 μA typ., 65 μA max.

0.1 μA typ., 1.0 μA max.

• Output current:

• Input and output capacitors:

• Ripple rejection:

Possible to output 300 mA (V_IN≥ V_OUT(S)+ 1.0 V)^*1

A ceramic capacitor of 1.0 μF or more can be used.

70 dB typ. (f = 1.0 kHz)

• Built-in soft-start circuit:

• Built-in overcurrent protection circuit:

• Built-in ON / OFF circuit:

Soft-start time : 0.7 ms typ. (C_SS= 1.0 nF)

Limits overcurrent of output transistor.

Ensures long battery life.

Discharge shunt function “available” / “unavailable” is selectable.

Pull-down function “available” / “unavailable” is selectable.

Ta = −40°C to +85°C

• Operation temperature range:

• Lead-free, Sn 100%, halogen-free^*2

*1. Attention should be paid to the power dissipation of the package when the output current is large.

*2. Refer to “ Product Name Structure” for details.

 Applications

• Constant-voltage power supply for battery-powered device

• Constant-voltage power supply for cellular phone, portable device

• Constant-voltage power supply for digital still camera, TV, DVD recorder

 Packages

• SOT-89-5

• SOT-23-5

• SNT-6A(H)

1

5.5 V INPUT, 300 mA VOLTAGE REGULATOR WITH SOFT-START FUNCTION

S-1137 Series

Rev.2.2_00

 Block Diagrams

1. S-1137 Series A type

*1

Function

Status

ON / OFF logic

Discharge shunt

function

Active “H”

VIN

VOUT

Available

Overcurrent

protection circuit

Pull-down resistor

ON / OFF

circuit

ON / OFF

SSC

+

−

Soft-start

circuit

Reference

voltage circuit

*1

VSS

*1. Parasitic diode

Figure 1

2. S-1137 Series B type

*1

Function

Status

ON / OFF logic

Discharge shunt

function

Active “H”

VIN

VOUT

Available

Overcurrent

protection circuit

Pull-down resistor

Unavailable

ON / OFF

circuit

ON / OFF

SSC

+

−

Soft-start

circuit

Reference

voltage circuit

*1

VSS

*1. Parasitic diode

Figure 2

2

5.5 V INPUT, 300 mA VOLTAGE REGULATOR WITH SOFT-START FUNCTION

Rev.2.2_00

S-1137 Series

3. S-1137 Series C type

*1

Function

Status

ON / OFF logic

Discharge shunt

function

Active “H”

VIN

VOUT

Unavailable

Available

Overcurrent

protection circuit

Pull-down resistor

ON / OFF

circuit

ON / OFF

SSC

+

−

Soft-start

circuit

Reference

voltage circuit

*1

VSS

*1. Parasitic diode

Figure 3

4. S-1137 Series D type

*1

Function

Status

ON / OFF logic

Discharge shunt

function

Active “H”

VIN

VOUT

Unavailable

Overcurrent

protection circuit

Pull-down resistor

ON / OFF

circuit

ON / OFF

SSC

+

−

Soft-start

circuit

Reference

voltage circuit

*1

VSS

*1. Parasitic diode

Figure 4

3

5.5 V INPUT, 300 mA VOLTAGE REGULATOR WITH SOFT-START FUNCTION

S-1137 Series

Rev.2.2_00

 Product Name Structure

Users can select the product type, output voltage, and package type for the S-1137 Series. Refer to “1. Product

name” regarding the contents of product name, “2. Function list of product type” regarding the product type,

“3. Packages” regarding the package drawings.

1. Product name

(1) SOT-89-5

S-1137

x

xx

-

U5T1

x

Environmental code

U:

G:

Lead-free (Sn 100%), halogen-free

Lead-free (for details, please contact our sales office)

Package abbreviation and IC packing specifications^*1

U5T1: SOT-89-5, Tape

Output voltage^*2

12 to 35

(e.g., when the output voltage is 1.2 V, it is expressed as 12.)

Product type^*3

A to D

*1. Refer to the tape drawing.

*2. If you request the product which has 0.05 V step, contact our sales office.

*3. Refer to “2. Function list of product type”.

(2) SOT-23-5

S-1137

x

xx

-

M5T1

x

Environmental code

U:

S:

Lead-free (Sn 100%), halogen-free

Lead-free, halogen-free

Package abbreviation and IC packing specifications^*1

M5T1: SOT-23-5, Tape

Output voltage^*2

12 to 35

(e.g., when the output voltage is 1.2 V, it is expressed as 12.)

Product type^*3

A to D

*1. Refer to the tape drawing.

*2. If you request the product which has 0.05 V step, contact our sales office.

*3. Refer to “2. Function list of product type”.

4

5.5 V INPUT, 300 mA VOLTAGE REGULATOR WITH SOFT-START FUNCTION

S-1137 Series

Rev.2.2_00

(3) SNT-6A(H)

S-1137

x

xx

-

I6T2

U

Environmental code

U:

Lead-free (Sn 100%), halogen-free

Package abbreviation and IC packing specifications^*1

I6T2: SNT-6A(H), Tape

Output voltage^*2

12 to 35

(e.g., when the output voltage is 1.2 V, it is expressed as 12.)

Product type^*3

A to D

*1. Refer to the tape drawing.

*2. If you request the product which has 0.05 V step, contact our sales office.

*3. Refer to “2. Function list of product type”.

2. Function list of product type

Table 1

Product Type

ON / OFF Logic

Active “H”

Discharge Shunt Function

Available

Pull-down Resistor

Available

A

B

C

D

Active “H”

Available

Unavailable

Available

Unavailable

3. Packages

Drawing Code

Package Name

SOT-89-5

Package

Tape

Reel

Land

UP005-A-P-SD

MP005-A-P-SD

PI006-A-P-SD

UP005-A-C-SD

MP005-A-C-SD

PI006-A-C-SD

UP005-A-R-SD

MP005-A-R-SD

PI006-A-R-SD

⎯

SOT-23-5

SNT-6A(H)

PI006-A-L-SD

5

5.5 V INPUT, 300 mA VOLTAGE REGULATOR WITH SOFT-START FUNCTION

S-1137 Series

Rev.2.2_00

4. Product name list

4. 1 S-1137 Series A type

ON / OFF logic:

Discharge shunt function:

Active “H”

Available

Pull-down resistor:

Table 2

Available

SOT-89-5

SOT-23-5

Output Voltage

1.2 V 15 mV

1.3 V 15 mV

1.4 V 15 mV

1.5 V 1.0%

1.6 V 1.0%

1.7 V 1.0%

1.8 V 1.0%

1.85 V 1.0%

1.9 V 1.0%

2.0 V 1.0%

2.1 V 1.0%

2.2 V 1.0%

2.3 V 1.0%

2.4 V 1.0%

2.5 V 1.0%

2.6 V 1.0%

2.7 V 1.0%

2.8 V 1.0%

2.85 V 1.0%

2.9 V 1.0%

3.0 V 1.0%

3.1 V 1.0%

3.2 V 1.0%

3.3 V 1.0%

3.4 V 1.0%

3.5 V 1.0%

SNT-6A(H)

S-1137A12-U5T1x

S-1137A13-U5T1x

S-1137A14-U5T1x

S-1137A15-U5T1x

S-1137A16-U5T1x

S-1137A17-U5T1x

S-1137A18-U5T1x

S-1137A1J-U5T1x

S-1137A19-U5T1x

S-1137A20-U5T1x

S-1137A21-U5T1x

S-1137A22-U5T1x

S-1137A23-U5T1x

S-1137A24-U5T1x

S-1137A25-U5T1x

S-1137A26-U5T1x

S-1137A27-U5T1x

S-1137A28-U5T1x

S-1137A2J-U5T1x

S-1137A29-U5T1x

S-1137A30-U5T1x

S-1137A31-U5T1x

S-1137A32-U5T1x

S-1137A33-U5T1x

S-1137A34-U5T1x

S-1137A35-U5T1x

S-1137A12-M5T1y

S-1137A13-M5T1y

S-1137A14-M5T1y

S-1137A15-M5T1y

S-1137A16-M5T1y

S-1137A17-M5T1y

S-1137A18-M5T1y

S-1137A1J-M5T1y

S-1137A19-M5T1y

S-1137A20-M5T1y

S-1137A21-M5T1y

S-1137A22-M5T1y

S-1137A23-M5T1y

S-1137A24-M5T1y

S-1137A25-M5T1y

S-1137A26-M5T1y

S-1137A27-M5T1y

S-1137A28-M5T1y

S-1137A2J-M5T1y

S-1137A29-M5T1y

S-1137A30-M5T1y

S-1137A31-M5T1y

S-1137A32-M5T1y

S-1137A33-M5T1y

S-1137A34-M5T1y

S-1137A35-M5T1y

S-1137A12-I6T2U

S-1137A13-I6T2U

S-1137A14-I6T2U

S-1137A15-I6T2U

S-1137A16-I6T2U

S-1137A17-I6T2U

S-1137A18-I6T2U

S-1137A1J-I6T2U

S-1137A19-I6T2U

S-1137A20-I6T2U

S-1137A21-I6T2U

S-1137A22-I6T2U

S-1137A23-I6T2U

S-1137A24-I6T2U

S-1137A25-I6T2U

S-1137A26-I6T2U

S-1137A27-I6T2U

S-1137A28-I6T2U

S-1137A2J-I6T2U

S-1137A29-I6T2U

S-1137A30-I6T2U

S-1137A31-I6T2U

S-1137A32-I6T2U

S-1137A33-I6T2U

S-1137A34-I6T2U

S-1137A35-I6T2U

Remark1. Please contact our sales office for products with specifications other than the above.

2. x: G or U

y: S or U

3. Please select products of environmental code = U for Sn 100%, halogen-free products.

6

5.5 V INPUT, 300 mA VOLTAGE REGULATOR WITH SOFT-START FUNCTION

S-1137 Series

Rev.2.2_00

4. 2 S-1137 Series B type

ON / OFF logic:

Discharge shunt function:

Active “H”

Available

Pull-down resistor:

Table 3

Unavailable

SOT-89-5

SOT-23-5

Output Voltage

1.2 V 15 mV

1.3 V 15 mV

1.4 V 15 mV

1.5 V 1.0%

1.6 V 1.0%

1.7 V 1.0%

1.8 V 1.0%

1.85 V 1.0%

1.9 V 1.0%

2.0 V 1.0%

2.1 V 1.0%

2.2 V 1.0%

2.3 V 1.0%

2.4 V 1.0%

2.5 V 1.0%

2.6 V 1.0%

2.7 V 1.0%

2.8 V 1.0%

2.85 V 1.0%

2.9 V 1.0%

3.0 V 1.0%

3.1 V 1.0%

3.2 V 1.0%

3.3 V 1.0%

3.4 V 1.0%

3.5 V 1.0%

SNT-6A(H)

S-1137B12-U5T1x

S-1137B13-U5T1x

S-1137B14-U5T1x

S-1137B15-U5T1x

S-1137B16-U5T1x

S-1137B17-U5T1x

S-1137B18-U5T1x

S-1137B1J-U5T1x

S-1137B19-U5T1x

S-1137B20-U5T1x

S-1137B21-U5T1x

S-1137B22-U5T1x

S-1137B23-U5T1x

S-1137B24-U5T1x

S-1137B25-U5T1x

S-1137B26-U5T1x

S-1137B27-U5T1x

S-1137B28-U5T1x

S-1137B2J-U5T1x

S-1137B29-U5T1x

S-1137B30-U5T1x

S-1137B31-U5T1x

S-1137B32-U5T1x

S-1137B33-U5T1x

S-1137B34-U5T1x

S-1137B35-U5T1x

S-1137B12-M5T1y

S-1137B13-M5T1y

S-1137B14-M5T1y

S-1137B15-M5T1y

S-1137B16-M5T1y

S-1137B17-M5T1y

S-1137B18-M5T1y

S-1137B1J-M5T1y

S-1137B19-M5T1y

S-1137B20-M5T1y

S-1137B21-M5T1y

S-1137B22-M5T1y

S-1137B23-M5T1y

S-1137B24-M5T1y

S-1137B25-M5T1y

S-1137B26-M5T1y

S-1137B27-M5T1y

S-1137B28-M5T1y

S-1137B2J-M5T1y

S-1137B29-M5T1y

S-1137B30-M5T1y

S-1137B31-M5T1y

S-1137B32-M5T1y

S-1137B33-M5T1y

S-1137B34-M5T1y

S-1137B35-M5T1y

S-1137B12-I6T2U

S-1137B13-I6T2U

S-1137B14-I6T2U

S-1137B15-I6T2U

S-1137B16-I6T2U

S-1137B17-I6T2U

S-1137B18-I6T2U

S-1137B1J-I6T2U

S-1137B19-I6T2U

S-1137B20-I6T2U

S-1137B21-I6T2U

S-1137B22-I6T2U

S-1137B23-I6T2U

S-1137B24-I6T2U

S-1137B25-I6T2U

S-1137B26-I6T2U

S-1137B27-I6T2U

S-1137B28-I6T2U

S-1137B2J-I6T2U

S-1137B29-I6T2U

S-1137B30-I6T2U

S-1137B31-I6T2U

S-1137B32-I6T2U

S-1137B33-I6T2U

S-1137B34-I6T2U

S-1137B35-I6T2U

Remark1. Please contact our sales office for products with specifications other than the above.

2. x: G or U

y: S or U

3. Please select products of environmental code = U for Sn 100%, halogen-free products.

7

5.5 V INPUT, 300 mA VOLTAGE REGULATOR WITH SOFT-START FUNCTION

S-1137 Series

Rev.2.2_00

4. 3 S-1137 Series C type

ON / OFF logic:

Active “H”

Discharge shunt function:

Unavailable

Pull-down resistor:

Table 4

Available

SOT-89-5

SOT-23-5

Output Voltage

1.2 V 15 mV

1.3 V 15 mV

1.4 V 15 mV

1.5 V 1.0%

1.6 V 1.0%

1.7 V 1.0%

1.8 V 1.0%

1.85 V 1.0%

1.9 V 1.0%

2.0 V 1.0%

2.1 V 1.0%

2.2 V 1.0%

2.3 V 1.0%

2.4 V 1.0%

2.5 V 1.0%

2.6 V 1.0%

2.7 V 1.0%

2.8 V 1.0%

2.85 V 1.0%

2.9 V 1.0%

3.0 V 1.0%

3.1 V 1.0%

3.2 V 1.0%

3.3 V 1.0%

3.4 V 1.0%

3.5 V 1.0%

SNT-6A(H)

S-1137C12-U5T1x

S-1137C13-U5T1x

S-1137C14-U5T1x

S-1137C15-U5T1x

S-1137C16-U5T1x

S-1137C17-U5T1x

S-1137C18-U5T1x

S-1137C1J-U5T1x

S-1137C19-U5T1x

S-1137C20-U5T1x

S-1137C21-U5T1x

S-1137C22-U5T1x

S-1137C23-U5T1x

S-1137C24-U5T1x

S-1137C25-U5T1x

S-1137C26-U5T1x

S-1137C27-U5T1x

S-1137C28-U5T1x

S-1137C2J-U5T1x

S-1137C29-U5T1x

S-1137C30-U5T1x

S-1137C31-U5T1x

S-1137C32-U5T1x

S-1137C33-U5T1x

S-1137C34-U5T1x

S-1137C35-U5T1x

S-1137C12-M5T1y

S-1137C13-M5T1y

S-1137C14-M5T1y

S-1137C15-M5T1y

S-1137C16-M5T1y

S-1137C17-M5T1y

S-1137C18-M5T1y

S-1137C1J-M5T1y

S-1137C19-M5T1y

S-1137C20-M5T1y

S-1137C21-M5T1y

S-1137C22-M5T1y

S-1137C23-M5T1y

S-1137C24-M5T1y

S-1137C25-M5T1y

S-1137C26-M5T1y

S-1137C27-M5T1y

S-1137C28-M5T1y

S-1137C2J-M5T1y

S-1137C29-M5T1y

S-1137C30-M5T1y

S-1137C31-M5T1y

S-1137C32-M5T1y

S-1137C33-M5T1y

S-1137C34-M5T1y

S-1137C35-M5T1y

S-1137C12-I6T2U

S-1137C13-I6T2U

S-1137C14-I6T2U

S-1137C15-I6T2U

S-1137C16-I6T2U

S-1137C17-I6T2U

S-1137C18-I6T2U

S-1137C1J-I6T2U

S-1137C19-I6T2U

S-1137C20-I6T2U

S-1137C21-I6T2U

S-1137C22-I6T2U

S-1137C23-I6T2U

S-1137C24-I6T2U

S-1137C25-I6T2U

S-1137C26-I6T2U

S-1137C27-I6T2U

S-1137C28-I6T2U

S-1137C2J-I6T2U

S-1137C29-I6T2U

S-1137C30-I6T2U

S-1137C31-I6T2U

S-1137C32-I6T2U

S-1137C33-I6T2U

S-1137C34-I6T2U

S-1137C35-I6T2U

Remark1. Please contact our sales office for products with specifications other than the above.

2. x: G or U

y: S or U

3. Please select products of environmental code = U for Sn 100%, halogen-free products.

8

5.5 V INPUT, 300 mA VOLTAGE REGULATOR WITH SOFT-START FUNCTION

S-1137 Series

Rev.2.2_00

4. 4 S-1137 Series D type

ON / OFF logic:

Active “H”

Discharge shunt function:

Unavailable

Pull-down resistor:

Table 5

Unavailable

SOT-89-5

SOT-23-5

Output Voltage

1.2 V 15 mV

1.3 V 15 mV

1.4 V 15 mV

1.5 V 1.0%

1.6 V 1.0%

1.7 V 1.0%

1.8 V 1.0%

1.85 V 1.0%

1.9 V 1.0%

2.0 V 1.0%

2.1 V 1.0%

2.2 V 1.0%

2.3 V 1.0%

2.4 V 1.0%

2.5 V 1.0%

2.6 V 1.0%

2.7 V 1.0%

2.8 V 1.0%

2.85 V 1.0%

2.9 V 1.0%

3.0 V 1.0%

3.1 V 1.0%

3.2 V 1.0%

3.3 V 1.0%

3.4 V 1.0%

3.5 V 1.0%

SNT-6A(H)

S-1137D12-U5T1x

S-1137D13-U5T1x

S-1137D14-U5T1x

S-1137D15-U5T1x

S-1137D16-U5T1x

S-1137D17-U5T1x

S-1137D18-U5T1x

S-1137D1J-U5T1x

S-1137D19-U5T1x

S-1137D20-U5T1x

S-1137D21-U5T1x

S-1137D22-U5T1x

S-1137D23-U5T1x

S-1137D24-U5T1x

S-1137D25-U5T1x

S-1137D26-U5T1x

S-1137D27-U5T1x

S-1137D28-U5T1x

S-1137D2J-U5T1x

S-1137D29-U5T1x

S-1137D30-U5T1x

S-1137D31-U5T1x

S-1137D32-U5T1x

S-1137D33-U5T1x

S-1137D34-U5T1x

S-1137D35-U5T1x

S-1137D12-M5T1y

S-1137D13-M5T1y

S-1137D14-M5T1y

S-1137D15-M5T1y

S-1137D16-M5T1y

S-1137D17-M5T1y

S-1137D18-M5T1y

S-1137D1J-M5T1y

S-1137D19-M5T1y

S-1137D20-M5T1y

S-1137D21-M5T1y

S-1137D22-M5T1y

S-1137D23-M5T1y

S-1137D24-M5T1y

S-1137D25-M5T1y

S-1137D26-M5T1y

S-1137D27-M5T1y

S-1137D28-M5T1y

S-1137D2J-M5T1y

S-1137D29-M5T1y

S-1137D30-M5T1y

S-1137D31-M5T1y

S-1137D32-M5T1y

S-1137D33-M5T1y

S-1137D34-M5T1y

S-1137D35-M5T1y

S-1137D12-I6T2U

S-1137D13-I6T2U

S-1137D14-I6T2U

S-1137D15-I6T2U

S-1137D16-I6T2U

S-1137D17-I6T2U

S-1137D18-I6T2U

S-1137D1J-I6T2U

S-1137D19-I6T2U

S-1137D20-I6T2U

S-1137D21-I6T2U

S-1137D22-I6T2U

S-1137D23-I6T2U

S-1137D24-I6T2U

S-1137D25-I6T2U

S-1137D26-I6T2U

S-1137D27-I6T2U

S-1137D28-I6T2U

S-1137D2J-I6T2U

S-1137D29-I6T2U

S-1137D30-I6T2U

S-1137D31-I6T2U

S-1137D32-I6T2U

S-1137D33-I6T2U

S-1137D34-I6T2U

S-1137D35-I6T2U

Remark1. Please contact our sales office for products with specifications other than the above.

2. x: G or U

y: S or U

3. Please select products of environmental code = U for Sn 100%, halogen-free products.

9

5.5 V INPUT, 300 mA VOLTAGE REGULATOR WITH SOFT-START FUNCTION

S-1137 Series

Rev.2.2_00

 Pin Configurations

1. SOT-89-5

Table 6

Top view

5

Pin No.

Symbol

VOUT

Description

Output voltage pin

1

2

3

4

5

4

3

VSS

GND pin

SSC

Pin for soft-start control^*1

ON / OFF pin

ON / OFF

VIN

Input voltage pin

1

2

Figure 5

*1. Connect a capacitor between the SSC pin and VSS pin. The VOUT rising speeds at power-on and at the time

when the ON / OFF pin is set to ON can be adjusted according to the capacitance.

For details, refer to “■ Selection of Capacitor for Soft-start (C_SS)”.

2. SOT-23-5

Table 7

Top view

Pin No.

Symbol

VIN

Description

Input voltage pin

5

4

1

2

3

4

5

VSS

GND pin

ON / OFF

SSC

ON / OFF pin

Pin for soft-start control^*1

Output voltage pin

VOUT

1

2

3

Figure 6

*1. Connect a capacitor between the SSC pin and VSS pin. The VOUT rising speeds at power-on and at the time

when the ON / OFF pin is set to ON can be adjusted according to the capacitance.

For details, refer to “■ Selection of Capacitor for Soft-start (C_SS)”.

3. SNT-6A(H)

Table 8

Top view

Pin No.

Symbol

VOUT

Description

Output voltage pin

1

2

3

4

5

6

1

2

3

6

5

4

VSS

GND pin

SSC

Pin for soft-start control^*1

ON / OFF pin

GND pin

ON / OFF

VSS

Figure 7

VIN

Input voltage pin

*1. Connect a capacitor between the SSC pin and VSS pin. The VOUT rising speeds at power-on and at the time

when the ON / OFF pin is set to ON can be adjusted according to the capacitance.

For details, refer to “■ Selection of Capacitor for Soft-start (C_SS)”.

10

5.5 V INPUT, 300 mA VOLTAGE REGULATOR WITH SOFT-START FUNCTION

Rev.2.2_00

S-1137 Series

 Absolute Maximum Ratings

Table 9

(Ta = 25°C unless otherwise specified)

Item

Symbol

V_IN

V_{ON / OFF}

V_SSC

Absolute Maximum Rating

Unit

V

V_SS− 0.3 to V_SS+ 6.0

V_SS− 0.3 to V_IN+ 0.3

1000^*1

Input voltage

V

Output voltage

SOT-89-5

V_OUT

V

mW

°C

Power dissipation

SOT-23-5

P_D

600^*1

500^*1

SNT-6A(H)

Operation ambient temperature

Storage temperature

T_opr

T_stg

−40 to +85

−40 to +125

*1. When mounted on board

[Mounted board]

(1) Board size :

(2) Name :

114.3 mm × 76.2 mm × t1.6 mm

JEDEC STANDARD51-7

Caution The absolute maximum ratings are rated values exceeding which the product could suffer physical

damage. These values must therefore not be exceeded under any conditions.

1200

1000

SOT-89-5

800

SOT-23-5

600

400

SNT-6A(H)

200

0

100

150

50

0

Ambient Temperature (Ta) [°C]

Figure 8 Power Dissipation of Package

11

5.5 V INPUT, 300 mA VOLTAGE REGULATOR WITH SOFT-START FUNCTION

S-1137 Series

Rev.2.2_00

 Electrical Characteristics

Table 10 (1 / 2)

(Ta = 25°C unless otherwise specified)

Test

Item

Symbol

Condition

Min.

Typ.

Max.

Unit

Circuit

V_OUT(S)

1.2 V

1.5 V

≤

V_OUT(S)< 1.5 V

V_OUT(S)

V

1

−

0.015

+

0.015

V

_IN= V_OUT(S)

+ 1.0 V,

Output voltage^*1

Output current^*2

V_OUT(E)

I

_OUT= 100 mA

V_OUT(S)

≤

3.5 V

V_OUT(S)

V

1

×

0.99

×

1.01

I_OUT

V_IN

≥

V_OUT(S)

+

1.0 V

300^*5

0.50

⎯

mA

V

3

1

1.2 V

1.3 V

1.4 V

1.5 V

1.7 V

2.0 V

2.4 V

2.8 V

≤

V_OUT(S)< 1.3 V

V_OUT(S)< 1.4 V

V_OUT(S)< 1.5 V

V_OUT(S)< 1.7 V

V_OUT(S)< 2.0 V

V_OUT(S)< 2.4 V

V_OUT(S)< 2.8 V

0.58

0.48

0.37

0.31

0.28

0.25

0.23

0.21

0.67

0.56

0.50

0.47

0.42

0.38

0.35

0.31

V

⎯

V

Dropout voltage^*3

V_drop

I_OUT= 300 mA

V

V_OUT(S)

≤

3.5 V

V

ΔV^OUT1

ΔVIN•VOUT

Line regulation

Load regulation

V_OUT(S)

+

0.5 V

≤

V_IN

≤

5.5 V, I_OUT= 100 mA

⎯

0.05

0.2

%/V

1

V_IN= V_OUT(S)

+

1.0 V, 1.0 mA

≤

I_OUT

≤

100 mA

300 mA

⎯

15

45

40

mV

1

Δ

V_OUT2

120

ΔVOUT

ΔTa•VOUT

Output voltage

V

_IN= V_OUT(S)

1.0 V, I_OUT= 30 mA,

+85

⎯

130

45

⎯

ppm/

°

C

1

2

temperature coefficient^*4

Current consumption

during operation

Current consumption

during power-off

Input voltage

−

40 Ta

°

C

≤

°C

I_SS1

V_IN= V_OUT(S)

+

1.0 V, ON / OFF pin = ON, no load

65

μA

I_SS2

V_IN

1.0 V, ON / OFF pin = OFF, no load

⎯

0.1

⎯

1.0

5.5

⎯

μA

2

⎯

4

⎯

1.7

1.0

V

ON / OFF pin

V

_IN= V_OUT(S)

+

1.0 V, R_L= 1.0 kΩ

V_SH

⎯

V

input voltage “H”

ON / OFF pin

determined by V_OUToutput level

_IN= V_OUT(S)1.0 V, R_L= 1.0 k

determined by V_OUToutput level

V

+

Ω

V_SL

I_SH

I_SL

⎯

0.3

4

input voltage “L”

B / D type

A / C type

−

0.1

⎯

2.5

0.1

5.0

μA

4

ON / OFF pin

V

_IN= 5.5 V,

input current “H”

_{ON / OFF}= 5.5 V

1.0

μA

ON / OFF pin

V_IN= 5.5 V, V_{ON / OFF}= 0 V

−

0.1

⎯

0.1

μA

4

input current “L”

V

_IN= V_OUT(S)

+ 1.0 V, f = 1.0 kHz,

RR

I_short

t_SS

Ripple rejection

Short-circuit current

Soft-start time

⎯

70

150

0.7

⎯

dB

mA

ms

5

3

1

ΔV_rip= 0.5 Vrms, I_OUT= 50 mA

V_IN= V_OUT(S)

_IN= V_OUT(S)

_SS= 1.0 nF

+

1.0 V, ON / OFF pin = ON, V_OUT= 0 V

1.0 V, I_OUT= 100 mA, C_L= 1.0 F,

V

μ

C

12

5.5 V INPUT, 300 mA VOLTAGE REGULATOR WITH SOFT-START FUNCTION

Rev.2.2_00

S-1137 Series

Table 10 (2 / 2)

S-1137 Series A / B type (With discharge shunt function)

Test

Item

Symbol

Condition

Min.

Typ.

35

Max.

Unit

Circuit

Discharge shunt

resistance during

R_LOW

V_OUT= 0.1 V, V_IN= 5.5 V

⎯

Ω

3

power-off

S-1137 Series A / C type (With pull-down resistor)

Test

Item

Symbol

Condition

Min.

1.0

Typ.

2.2

Max.

5.0

Unit

Circuit

Power-off

pull-down resistor

R_PD

⎯

MΩ

4

*1. V_OUT(S): Set output voltage

V_OUT(E): Actual output voltage

Output voltage when fixing I_OUT(= 100 mA) and inputting V_OUT(S)+1.0 V

*2. The output current at which the output voltage becomes 95% of V_OUT(E)after gradually increasing the output current.

*3. V_drop= V_IN1− (V_OUT3× 0.98)

V_OUT3is the output voltage when V_IN= V_OUT(S)+ 1.0 V and I_OUT= 300 mA.

V_IN1is the input voltage at which the output voltage becomes 98% of V_OUT3after gradually decreasing the input

voltage.

*4. A change in temperature of the output voltage [mV/°C] is calculated using the following equation.

ΔV_OUT

ΔTa

ΔV_OUT

ΔTa • V_OUT

mV/°C ^*1= V_OUT(S)V ^*2

×

ppm/°C ^*3÷ 1000

[ ]

[

]

[ ]

*1. Change in temperature of output voltage

*2. Set output voltage

*3. Output voltage temperature coefficient

*5. The output current can be at least this value.

Due to restrictions on the package power dissipation, this value may not be satisfied. Attention should be paid to the

power dissipation of the package when the output current is large.

This specification is guaranteed by design.

13

5.5 V INPUT, 300 mA VOLTAGE REGULATOR WITH SOFT-START FUNCTION

S-1137 Series

 Test Circuits

1.

Rev.2.2_00

+

VOUT

VIN

A

+

ON / OFF

SSC

VSS

V

Set to ON

Figure 9

+

2.

3.

4.

5.

A

VOUT

VIN

ON / OFF SSC

VSS

Set to V_INor GND

Figure 10

VOUT

A

VIN

+

ON / OFF

SSC

VSS

V

Set to V_INor GND

Figure 11

VOUT

VIN

+

ON / OFF

A

SSC

VSS

R_L

Figure 12

VOUT

VIN

+

ON / OFF

SSC

VSS

R_L

Set to ON

Figure 13

14

5.5 V INPUT, 300 mA VOLTAGE REGULATOR WITH SOFT-START FUNCTION

S-1137 Series

Rev.2.2_00

 Standard Circuit

Input

Output

VIN

VOUT

*1

*2

C_IN

ON / OFF SSC

VSS

C_L

*3

C_SS

Single GND

GND

*1.

C_INis a capacitor for stabilizing the input.

*2. A ceramic capacitor of 1.0 μF or more can be used as C_L.

*3. A ceramic capacitor of 0.22 nF to 22 nF can be used for C_SS

.

Figure 14

Caution The above connection diagram and constants will not guarantee successful operation. Perform

thorough evaluation using the actual application to set the constants.

 Condition of Application

Input capacitor (C_IN) :

Output capacitor (C_L) :

1.0 μF or more

Capacitor for soft-start (C_SS) : 0.22 nF to 22 nF

Caution Generally a series regulator may cause oscillation, depending on the selection of external parts.

Confirm that no oscillation occurs in the application for which the above capacitors are used.

 Selection of Input and Output Capacitors (C_IN, C_L)

The S-1137 Series requires an output capacitor between the VOUT pin and VSS pin for phase compensation. Operation

is stabilized by a ceramic capacitor with an output capacitance of 1.0 μF or more over the entire temperature range.

When using an OS capacitor, a tantalum capacitor, or an aluminum electrolytic capacitor, the capacitance must be 1.0

μF or more.

The value of the output overshoot or undershoot transient response varies depending on the value of the output

capacitor. The required capacitance of the input capacitor differs depending on the application.

The recommended capacitance for an application is C_IN≥ 1.0 μF, C_L≥ 1.0 μF; however, when selecting the output

capacitor, perform sufficient evaluation including evaluation of temperature characteristics with the actual device.

 Selection of Capacitor for Soft-start (C_SS)

The S-1137 Series requires a capacitor for soft-start (C_SS) between the SSC pin and VSS pin. Over the entire

temperature range, the S-1137 Series operates stably with a ceramic capacitor of 0.22 nF or more. According to C_SS

capacitance, the rising speed of the output voltage is adjustable. The time that the output voltage rises to 99% is 0.7 ms

typ. at C_SS= 1.0 nF. The recommended value for applications is 0.22 nF ≤ C_SS≤ 22 nF, however, define the values by

sufficient evaluation including the temperature characteristics under the usage condition.

15

5.5 V INPUT, 300 mA VOLTAGE REGULATOR WITH SOFT-START FUNCTION

S-1137 Series

Rev.2.2_00

 Explanation of Terms

1. Low dropout voltage regulator

This voltage regulator has the low dropout voltage due to its built-in low on-resistance transistor.

2. Output voltage (V_OUT

)

The accuracy of the output voltage is ensured at 1.0% or 15 mV^*1under the specified conditions of fixed input

voltage^*2, fixed output current, and fixed temperature.

*1. When V_OUT< 1.5 V : 15 mV, When 1.5 V ≤ V_OUT: 1.0%

*2. Differs depending on the product.

Caution If the above conditions change, the output voltage value may vary and exceed the accuracy range

of the output voltage. Refer to “ Electrical Characteristics” and “ Characteristics (Typical

Data)” for details.

ΔV_OUT1







3. Line regulation

ΔV • V

_OUT

IN

Indicates the dependency of the output voltage on the input voltage. That is, the values show how much the output

voltage changes due to a change in the input voltage with the output current remaining unchanged.

4. Load regulation (ΔV_OUT2

)

Indicates the dependency of the output voltage on the output current. That is, the values show how much the output

voltage changes due to a change in the output current with the input voltage remaining unchanged.

5. Dropout voltage (V_drop

)

Indicates the difference between input voltage (V_IN1) and the output voltage when; decreasing input voltage (V_IN)

gradually until the output voltage has dropped out to the value of 98% of output voltage (V_OUT3), which is at

V_IN= V_OUT(S)+ 1.0 V.

V_drop= V_IN1− (V_OUT3× 0.98)

16

5.5 V INPUT, 300 mA VOLTAGE REGULATOR WITH SOFT-START FUNCTION

S-1137 Series

Rev.2.2_00

ΔV_OUT







6. Output voltage temperature coefficient

ΔTa • V

_OUT

The shaded area in Figure 15 is the range where V_OUTvaries in the operation temperature range when the output

voltage temperature coefficient is 130 ppm/°C.

Example of S-1137B30 typ. product

V_OUT

[V]

+0.39 mV/°C

*1

V_OUT(E)

−0.39 mV/°C

−40

+25

Ta [°C]

+85

*1.

V

_OUT(E)is the value of the output voltage measured at Ta = +25°C.

Figure 15

A change in the temperature of the output voltage [mV/°C] is calculated using the following equation.

ΔV_OUT

ΔTa

ΔV_OUT

ΔTa • V_OUT

mV/°C ^*1= V_OUT(S)V ^*2

×

ppm/°C ^*3÷ 1000

[ ]

[

]

[ ]

*1. Change in temperature of output voltage

*2. Set output voltage

*3. Output voltage temperature coefficient

17

5.5 V INPUT, 300 mA VOLTAGE REGULATOR WITH SOFT-START FUNCTION

S-1137 Series

Rev.2.2_00

 Operation

1. Basic operation

Figure 16 shows the block diagram of the S-1137 Series.

The error amplifier compares the reference voltage (V_ref) with feedback voltage (V_fb), which is the output voltage

resistance-divided by feedback resistors (R_sand R_f). It supplies the gate voltage necessary to maintain the constant

output voltage which is not influenced by the input voltage and temperature change, to the output transistor.

VIN

*1

Current

supply

Error

amplifier

VOUT

−

+

V_ref

R_f

V_fb

Reference voltage

circuit

R_s

VSS

*1. Parasitic diode

Figure 16

2. Output transistor

In the S-1137 Series, a low on-resistance P-channel MOS FET is used as the output transistor.

Be sure that V_OUTdoes not exceed V_IN+ 0.3 V to prevent the voltage regulator from being damaged due to reverse

current flowing from the VOUT pin through a parasitic diode to the VIN pin, when the potential of V_OUTbecame higher

than V_IN.

18

5.5 V INPUT, 300 mA VOLTAGE REGULATOR WITH SOFT-START FUNCTION

S-1137 Series

Rev.2.2_00

3. ON / OFF pin

This pin starts and stops the regulator.

When the ON / OFF pin is set to OFF level, the entire internal circuit stops operating, and the built-in P-channel MOS

FET output transistor between the VIN pin and VOUT pin is turned off, reducing current consumption significantly. The

S-1137 Series has a discharge shunt circuit which discharges the capacitor for soft-start (C_SS) so that the SSC pin is

forcibly set to the V_SSlevel.

Since the S-1137 Series A / B types have a built-in discharge shunt circuit to discharge the output capacitance, the

VOUT pin is forcibly set to V_SSlevel. In the S-1137 Series C / D types, the VOUT pin is set to V_SSlevel through several

hundred kΩ internal divided resistors between the VOUT pin and VSS pin.

Note that the current consumption increases when a voltage of 0.3 V to 1.0 V (Ta = 25°C) is applied to the ON / OFF

pin. The ON / OFF pin is configured as shown in Figures 17 and 18. In the S-1137 Series A / C types, the ON / OFF

pin is internally pulled down to the VSS pin in the floating status, so the VOUT pin is set to the V_SSlevel. In the S-1137

Series B / D types, the ON / OFF pin is not internally pulled down, so do not use the pin in the floating status. When not

using the ON / OFF pin in the S-1137 Series B / D types, connect the pin to the VIN pin.

Table 11

Product Type

A / B / C / D

ON / OFF Pin

“H” : ON

“L” : OFF

Internal Circuit

Operate

Stop

VOUT Pin Voltage

Set value

V_SSlevel

Current Consumption

I_SS1

I_SS2

*1

*1. IC’s current consumption increases as much as current flows into the pull-down resistor when the ON / OFF

pin is connected to the VIN pin and the S-1137 Series A / C types is operating (Figure 17).

(1) S-1137 Series A / C Type

VIN

(2) S-1137 Series B / D Type

VIN

ON / OFF

VSS

Figure 17

Figure 18

19

5.5 V INPUT, 300 mA VOLTAGE REGULATOR WITH SOFT-START FUNCTION

S-1137 Series

Rev.2.2_00

4. Discharge shunt function (S-1137 Series A / B types)

The S-1137 Series A / B types have a built-in discharge shunt circuit to discharge the output capacitance. When the

ON / OFF pin is set to OFF level, turns the output transistor off, and turns the discharge shunt circuit on so that the

output capacitor discharges. These types allow for the VOUT pin reach the V_SSlevel faster than the S-1137 Series C /

D types that does not have a discharge shunt circuit.

S-1137 Series

Output transistor : OFF

*1

VOUT

VIN

Discharge shunt circuit

: ON

Output

capacitor

*1

(C_L)

ON / OFF

ON / OFF circuit

ON / OFF Pin: OFF

Current flow

GND

VSS

*1. Parasitic diode

Figure 19

5. Overcurrent protection circuit

The S-1137 Series has an overcurrent protection circuit having the characteristics shown in “(1) Output Voltage vs.

Output Current (When Load Current Increases) (Ta = 25°C)” in “ Characteristics (Typical Data)”, in order to

protect the output transistor against an excessive output current and short circuiting between the VOUT pin and VSS

pin. The current when the output pin is short-circuited (I_short) is internally set at approx. 150 mA typ., and the normal

value is restored for the output voltage, if releasing a short circuit once.

Caution This overcurrent protection circuit does not work as for thermal protection. If this IC long keeps

short circuiting inside, pay attention to the conditions of input voltage and load current so that,

under the usage conditions including short circuit, the loss of the IC will not exceed power

dissipation of the package.

6. Pull-down resistor (S-1137 Series A / C types)

In the S-1137 Series A / C types, the ON / OFF pin is internally pulled down to the VSS pin in the floating status, so the

VOUT pin is set to the V_SSlevel.

IC’s current consumption increases as much as current flows into the pull-down resistor of 2.2 MΩ typ. when the ON /

OFF pin is connected to the VIN pin and the S-1137 Series A / C types is operating.

20

5.5 V INPUT, 300 mA VOLTAGE REGULATOR WITH SOFT-START FUNCTION

S-1137 Series

Rev.2.2_00

7. Soft-start function

The S-1137 Series has a soft-start circuit to suppress the rush current (I_RUSH) and overshoot of the output voltage

generated at power-on or at the time when the ON / OFF pin is set to ON.

Immediately after power-on or after the ON / OFF pin is set to ON, the output voltage slowly rises. The time that the

output voltage rises to 99% (t_SS) is adjustable by a capacitor (C_SS) externally connected between the SSC pin and VSS

pin. When C_SS= 1.0 nF, the time is 0.7 ms typ. At the time when the ON / OFF pin is set to OFF, the electric charge

charged in the external capacitor (C_SS) will be discharged by the discharge shunt transistor.

The soft-start time (t_SS) is defined by time consonants of the built-in constant current (approx. 1 μA) and the external

capacitor (C_SS):

t_SS(ms) = soft-start coefficient × C_SS(nF)

The soft-start coefficient (25°C) is as follows.

Min. : 0.4, Typ. : 0.7, Max. : 1.2

Input

voltage

(V_IN)

approx.0.7 V

SSC pin

voltage

(V_SSC

)

V_OUT× 0.99

Output

voltage

(V_OUT

)

Soft-start time (t_SS

)

t [ms]

Figure 20

The rush current can be suppressed greatly by the soft-start function.

As the value of the external capacitor is larger, the rush current decreases more.

Figure 21 shows the waveform example of the rush current.

Input

voltage

(V_IN)

Without soft-start : about 400 mA at the peak

With soft-start : about 20 mA at the peak

Rush

current

(I_RUSH

)

t [ms]

Figure 21 Waveform Example of Rush Current

21

5.5 V INPUT, 300 mA VOLTAGE REGULATOR WITH SOFT-START FUNCTION

S-1137 Series

Rev.2.2_00

 Precautions

• Wiring patterns for the VIN pin, the VOUT pin and GND should be designed so that the impedance is low. When

mounting an output capacitor between the VOUT pin and VSS pin (C_L), the capacitor for stabilizing the input between

the VIN pin and VSS pin (C_IN), and the capacitor for soft-start between the SSC pin and VSS pin, the distance from the

capacitors to these pins should be as short as possible.

• Note that generally the output voltage may increase when a series regulator is used at low load current (1.0 mA or

less).

• Note that generally the output voltage may increase due to the leakage current from an output driver when a series

regulator is used at high temperature.

• Generally a series regulator may cause oscillation, depending on the selection of external parts. The following

conditions are recommended for the S-1137 Series. However, be sure to perform sufficient evaluation under the actual

usage conditions for selection, including evaluation of temperature characteristics. Refer to “(8) Example of

Equivalent Series Resistance vs. Output Current Characteristics (Ta = 25°C)” in “ Reference Data” for the

equivalent series resistance (R_ESR) of the output capacitor.

Input capacitor (C_IN) :

Output capacitor (C_L) :

1.0 μF or more

Capacitor for soft-start (C_SS) : 0.22 nF to 22 nF

• The voltage regulator may oscillate when the impedance of the power supply is high and the input capacitance is small

or an input capacitor is not connected.

• If the output capacitance is small, power supply’s fluctuation and the characteristics of load fluctuation become worse.

Sufficiently evaluate the output voltage’s fluctuation with the actual device.

• Although the S-1137 Series has a soft-start circuit, overshoot may occur in the output voltage momentarily when the

capacitance of the capacitor for soft-start (C_SS) is small. Perform sufficient evaluation with actual devices.

• The application conditions for the input voltage, output voltage, and load current should not exceed the package power

dissipation.

• Do not apply an electrostatic discharge to this IC that exceeds the performance ratings of the built-in electrostatic

protection circuit.

• In determining the output current, attention should be paid to the output current value specified in Table 10 in

“ Electrical Characteristics” and footnote *5 of the table.

• ABLIC Inc. claims no responsibility for any disputes arising out of or in connection with any infringement by products

including this IC of patents owned by a third party.

22

5.5 V INPUT, 300 mA VOLTAGE REGULATOR WITH SOFT-START FUNCTION

S-1137 Series

Rev.2.2_00

 Characteristics (Typical Data)

(1) Output Voltage vs. Output Current (When Load Current Increases) (Ta = 25°C)

V^OUT= 1.2 V

VOUT = 2.5 V

1.6

1.4

1.2

1.0

0.8

0.6

0.4

0.2

0

3.0

2.5

2.0

1.5

1.0

0.5

V

IN = 2.8 V

V

IN = 1.5 V

1.7 V

3.0 V

3.5 V

2.2 V

4.5 V

3.2 V

5.5 V

0

100 200 300 400 500 600 700

IOUT [mA]

V^OUT= 3.5 V

4.0

3.5

3.0

2.5

2.0

1.5

1.0

0.5

0

Remark In determining the output current, attention should

be paid to the following.

V

IN = 3.8 V

4.0 V

4.5 V

1. The minimum output current value and

footnote *5 in Table 10 in the “ Electrical

Characteristics”

5.5 V

2. The package power dissipation

0

100 200 300 400 500 600 700

IOUT [mA]

(2) Output Voltage vs. Input Voltage (Ta = 25°C)

V^OUT= 1.2 V

VOUT = 2.5 V

1.4

1.2

1.0

0.8

3.0

2.5

2.0

1.5

I

OUT = 1 mA

^OUT= 30 mA

OUT = 50 mA

I

OUT = 1 mA

^OUT= 30 mA

OUT = 50 mA

0.6

0.4

0.2

0

1.0

0.5

0

I

OUT = 100 mA

I

OUT = 100 mA

0

1.0

2.0

3.0

4.0

5.0

6.0

0

1.0

2.0

3.0

4.0

5.0

6.0

VIN [V]

VOUT = 3.5 V

4.0

3.5

3.0

2.5

2.0

1.5

1.0

0.5

0

I

OUT = 1 mA

^OUT= 30 mA

OUT = 50 mA

OUT = 100 mA

0

1.0

2.0

3.0

4.0

5.0

6.0

VIN [V]

23

5.5 V INPUT, 300 mA VOLTAGE REGULATOR WITH SOFT-START FUNCTION

S-1137 Series

Rev.2.2_00

(3) Dropout Voltage vs. Output Current

V^OUT= 1.2 V

VOUT = 2.5 V

0.35

0.20

0.18

0.16

0.14

0.12

0.10

0.08

0.06

0.04

0.02

0

Ta = 85°C

0.30

Ta = 85°C

Ta = 25°C

Ta = −40°C

Ta = 25°C

0.25

Ta = −40°C

0.20

0.15

0.10

0.05

0

50

100 150 200 250 300

0

50

100 150 200 250 300

I

OUT [mA]

IOUT [mA]

V^OUT= 3.5 V

0.18

0.16

0.14

0.12

0.10

0.08

0.06

0.04

0.02

0

Ta = 85°C

Ta = 25°C

Ta = −40°C

0

50

100 150 200 250 300

I

OUT [mA]

(4) Dropout Voltage vs. Set Output Voltage

0.35

I^OUT= 300 mA

0.30

150 mA

100 mA

0.25

0.20

0.15

50 mA

1 mA

30 mA 10 mA

0.10

0.05

0

0.1 mA

1.0

1.5

2.0

2.5

3.0

3.5

V^OUT(S)[V]

24

5.5 V INPUT, 300 mA VOLTAGE REGULATOR WITH SOFT-START FUNCTION

S-1137 Series

Rev.2.2_00

(5) Output Voltage vs. Ambient Temperature

V^OUT= 1.2 V

VOUT = 2.5 V

2.70

1.30

2.65

2.60

2.55

2.50

2.45

2.40

2.35

2.30

1.25

1.20

1.15

1.10

−40 −25

0

25

50

75 85

−40 −25

0

25

50

75 85

Ta [°C]

V^OUT= 3.5 V

3.8

3.7

3.6

3.5

3.4

3.3

3.2

−40 −25

0

25

50

75 85

Ta [°C]

(6) Current Consumption vs. Input Voltage

V^OUT= 1.2 V

VOUT = 2.5 V

70

60

50

60

50

40

30

20

10

Ta = 85°C

40

25°C

30

20

10

0

−40°C

0

1

2

4

5

6

1

2

4

5

6

3

VIN [V]

V^IN[V]

V^OUT= 3.5 V

70

60

50

40

30

20

10

Ta = 85°C

25°C

−40°C

0

1

2

4

5

6

3

VIN [V]

25

5.5 V INPUT, 300 mA VOLTAGE REGULATOR WITH SOFT-START FUNCTION

S-1137 Series

Rev.2.2_00

(7) Ripple Rejection (Ta = 25°C)

V^OUT= 1.2 V

V^OUT= 2.5 V

V_IN= 2.2 V, C_L= 1.0 μF

V_IN= 3.5 V, C_L= 1.0 μF

100

80

100

80

60

40

20

I

OUT = 1 mA

I

OUT = 1 mA

I

OUT = 30 mA

60

40

I

OUT = 30 mA

OUT = 50 mA

OUT = 100 mA

I

OUT = 50 mA

OUT = 100 mA

20

0

I

0

10

100

1k

10k

100k

1M

10

100

1k

10k

100k

1M

Frequency [Hz]

VOUT = 3.5 V

V_IN= 4.5 V, C_L= 1.0 μF

100

80

60

40

20

I

OUT = 1 mA

I

OUT = 30 mA

I

OUT = 50 mA

OUT = 100 mA

I

0

10

100

1k 10k

Frequency [Hz]

100k

1M

26

5.5 V INPUT, 300 mA VOLTAGE REGULATOR WITH SOFT-START FUNCTION

S-1137 Series

Rev.2.2_00

 Reference Data

(1) Transient Response Characteristics when Input (Ta = 25°C)

V

OUT = 1.2 V

VOUT = 2.5 V

I_OUT= 100 mA, t_r= t_f= 5.0

μ

s, C_L= 1.0

μ

F, C_SS= 1.0 nF

I_OUT= 100 mA, t_r= t_f= 5.0

μ

s, C_L= 1.0

μ

F, C_SS= 1.0 nF

4.0

3.5

3.0

2.5

2.0

1.5

1.0

0.5

0

5.0

4.5

4.0

3.5

3.0

2.5

2.0

1.5

1.0

1.32

1.30

1.28

1.26

1.24

1.22

1.20

1.18

1.16

2.74

2.70

2.66

2.62

2.58

2.54

2.50

2.46

2.42

V

IN

V

IN

VOUT

−100 −50

0

50 100 150 200 250 300 350

−100 −50

0

50 100 150 200 250 300 350

t [μs]

V

OUT = 3.5 V

I_OUT= 100 mA, t_r= t_f= 5.0

μ

s, C_L= 1.0

μ

F, C_SS= 1.0 nF

6.0

5.5

5.0

4.5

4.0

3.5

3.0

2.5

2.0

3.74

3.70

3.66

3.62

3.58

3.54

3.50

3.46

3.42

V

IN

VOUT

−100 −50

0

50 100 150 200 250 300 350

t [μs]

(2) Transient Response Characteristics of Load (Ta = 25°C)

V

OUT = 1.2 V

V

OUT = 2.5 V

_IN= 2.2 V, C_IN= C_L= 1.0

μ

F, C_SS= 1.0 nF, I_OUT= 50 mA

↔

100 mA

V_IN= 3.5 V, C_IN= C_L= 1.0 μF, C_SS= 1.0 nF, I_OUT= 50 mA ↔ 100 mA

150

100

50

150

100

50

1.40

1.35

1.30

2.70

2.65

I

OUT

I

OUT

2.60

1.25

1.20

0

2.55

2.50

0

V

OUT

V

OUT

−50

−100

−150

−50

−100

−150

1.15

1.10

2.45

2.40

−100 −50

0

50 100 150 200 250 300 350

−100 −50

0

50 100 150 200 250 300 350

t [μs]

V

OUT = 3.5 V

_IN= 4.5 V, C_IN= C_L= 1.0

V

μ

F, C_SS= 1.0 nF, I_OUT= 50 mA

↔

100 mA

150

100

50

3.70

3.65

3.60

I

OUT

3.55

3.50

0

V

OUT

−50

−100

−150

3.45

3.40

−100 −50

0

50 100 150 200 250 300 350

t [μs]

27

5.5 V INPUT, 300 mA VOLTAGE REGULATOR WITH SOFT-START FUNCTION

S-1137 Series

Rev.2.2_00

(3) Transient Response Characteristics of ON / OFF Pin (Ta = 25°C)

V

OUT = 1.2 V

V

OUT = 2.5 V

_IN= 2.2 V, t_r= 1.0

μs, C_IN= C_L= 1.0

μF, C_SS= 1.0 nF, I_OUT= 100 mA

_IN= 3.5 V, t_r= 1.0

μs, C_IN= C_L= 1.0

μF, C_SS= 1.0 nF, I_OUT= 100 mA

2.4

2.0

1.6

1.2

0.8

0.4

0

3

6

5

4

3

2

1

6

4

2

VON / OFF

V

ON / OFF

OUT

1

2

0

VOUT

−1

−2

−4

−6

V

−2

−3

0

−0.5

0

0.5

1.0

1.5

2.0

−0.5

0

0.5

1.0

1.5

2.0

t [ms]

V

OUT = 3.5 V

_IN= 4.5 V, t_r= 1.0

μs, C_IN= C_L= 1.0

μF, C_SS= 1.0 nF, I_OUT= 100 mA

6

5

4

3

2

1

0

6

4

VON / OFF

2

0

VOUT

−2

−4

−6

−0.5

0

0.5

1.0

1.5

2.0

t [ms]

(4) Soft-start Time vs. Ambient Temperature Characteristics

(5) Soft-start time vs. Capacitor for Soft-start Characteristics

(Ta = 25°C)

V_IN= V_OUT+ 1.0 V, V_{ON / OFF}= 0 V → V_OUT+ 1.0 V,

C_IN= C_L= 1.0 μF, C_SS= 1.0 nF

C_IN= C_L= 1.0 μF

1.4

1.2

1.0

0.8

0.6

100.0

V

OUT = 1.2 V

10.0

1.0

2.5 V

3.5 V

VOUT = 1.2 V

2.5 V

0.4

0.2

0

3.5 V

0.1

40 25

0

25

50

75 85

0.1

1.0

10.0

100.0

Ta [C]

CSS [nF]

28

5.5 V INPUT, 300 mA VOLTAGE REGULATOR WITH SOFT-START FUNCTION

S-1137 Series

Rev.2.2_00

(6) Rush Current Characteristics (Ta = 25°C)

V_OUT= 1.2 V, V_IN= 2.2 V, I_OUT= 0 mA,

C_L= 1.0 μF, C_SS= 0.22 nF

C_L= 1.0 μF, C_SS= 1.0 nF

2.5

200

160

120

80

2.5

200

160

120

80

V

ON/OFF

V

ON/OFF

2.0

1.5

1.0

0.5

0

2.0

1.5

1.0

0.5

0

V

OUT

40

V

OUT

I

RUSH

I

RUSH

0

−0.2

0

0.2

0.4

t [ms]

0.6

0.8

1.0

−0.2

0

0.2

0.4

0.6

0.8

1.0

t [ms]

V_OUT= 1.2 V, V_IN= 2.2 V, I_OUT= 0 mA,

C_L= 1.0 μF, C_SS= 22.0 nF

2.5

100

80

60

40

20

0

V

ON/OFF

2.0

1.5

1.0

0.5

0

V

OUT

I

RUSH

−5

0

5

10

15

20

25

t [ms]

V_OUT= 3.5 V, V_IN= 4.5 V, I_OUT= 0 mA,

C_L= 1.0 μF, C_SS= 0.22 nF

C_L= 1.0 μF, C_SS= 1.0 nF

5

200

160

120

80

5

200

160

120

80

VON/OFF

V

ON/OFF

4

3

2

1

0

4

3

2

1

0

V

OUT

V

OUT

I

RUSH

40

I

RUSH

0

−0.2

0

0.2

0.4

0.6

0.8

1.0

−0.2

0

0.2

0.4

0.6

0.8

1.0

t [ms]

V_OUT= 3.5 V, V_IN= 4.5 V, I_OUT= 0 mA,

C_L= 1.0 μF, C_SS= 22.0 nF

5

100

80

60

40

20

0

V

ON/OFF

4

3

2

1

0

V

OUT

I

RUSH

−5

0

5

10

15

20

25

t [ms]

29

5.5 V INPUT, 300 mA VOLTAGE REGULATOR WITH SOFT-START FUNCTION

S-1137 Series

Rev.2.2_00

(7) Output Capacitance vs. Characteristics of Discharge Time (Ta = 25°C)

S-1137 Series A / B type (with discharge shunt function)

V_IN= V_OUT+ 1.0 V, I_OUT= no load

V_{ON / OFF}= V_OUT+ 1.0 V → V_SS, t_f= 1 μs

1 μs

2.5

V_{ON / OFF}

2.0

VOUT(s) = 1.2 V

2.5 V

3.5 V

1.5

1.0

0.5

0

V_SS

t_DSC

V_OUT

0

2

4

6

8

10

12

C^L[μF]

V_OUT× 10%

V_IN= V_OUT+ 1.0 V

V_{ON / OFF}= V_OUT+ 1.0 V → V_SS

Figure 22 Measurement Condition of Discharge Time

(8) Example of Equivalent Series Resistance vs. Output Current Characteristics (Ta = 25°C)

C_L: Murata Manufacturing Co., Ltd. GRM155B31A105K (1.0 μF)

C_SS: Murata Manufacturing Co., Ltd. GRM40B102K (1.0 nF)

C_IN= C_L= 1.0 μF

C_SS= 1.0 nF

100

VIN

VOUT

C_IN

Stable

S-1137 Series

C_L

SSC

ON / OFF

C_SS

VSS

R_ESR

0

0.1

300

I_OUT[mA]

30

5.5 V INPUT, 300 mA VOLTAGE REGULATOR WITH SOFT-START FUNCTION

S-1137 Series

Rev.2.2_00

 Marking Specifications

1. SOT-89-5

Top view

(1) to (3)

(4) to (6)

: Product code (Refer to Product name vs. Product code)

: Lot number

5

4

1

2

3

Product name vs. Product code

(a) S-1137 Series A type

(b) S-1137 Series B type

Product code

Product Name

(1)

V

(2)

H

(3)

C

D

E

F

(1)

V

(2)

I

(3)

C

D

E

F

S-1137A12-U5T1x

S-1137A13-U5T1x

S-1137A14-U5T1x

S-1137A15-U5T1x

S-1137A16-U5T1x

S-1137A17-U5T1x

S-1137A18-U5T1x

S-1137A1J-U5T1x

S-1137A19-U5T1x

S-1137A20-U5T1x

S-1137A21-U5T1x

S-1137A22-U5T1x

S-1137A23-U5T1x

S-1137A24-U5T1x

S-1137A25-U5T1x

S-1137A26-U5T1x

S-1137A27-U5T1x

S-1137A28-U5T1x

S-1137A2J-U5T1x

S-1137A29-U5T1x

S-1137A30-U5T1x

S-1137A31-U5T1x

S-1137A32-U5T1x

S-1137A33-U5T1x

S-1137A34-U5T1x

S-1137A35-U5T1x

Remark1. x: G or U

S-1137B12-U5T1x

S-1137B13-U5T1x

S-1137B14-U5T1x

S-1137B15-U5T1x

S-1137B16-U5T1x

S-1137B17-U5T1x

S-1137B18-U5T1x

S-1137B1J-U5T1x

S-1137B19-U5T1x

S-1137B20-U5T1x

S-1137B21-U5T1x

S-1137B22-U5T1x

S-1137B23-U5T1x

S-1137B24-U5T1x

S-1137B25-U5T1x

S-1137B26-U5T1x

S-1137B27-U5T1x

S-1137B28-U5T1x

S-1137B2J-U5T1x

S-1137B29-U5T1x

S-1137B30-U5T1x

S-1137B31-U5T1x

S-1137B32-U5T1x

S-1137B33-U5T1x

S-1137B34-U5T1x

S-1137B35-U5T1x

I

G

H

I

G

H

I

J

I

J

K

L

I

K

L

I

M

N

O

P

Q

R

S

T

I

M

N

O

P

Q

R

S

T

I

U

V

W

X

Y

Z

I

U

V

W

X

Y

Z

I

2

I

2

3

I

3

2. Please select products of environmental code = U for Sn 100%, halogen-free products.

31

5.5 V INPUT, 300 mA VOLTAGE REGULATOR WITH SOFT-START FUNCTION

S-1137 Series

Rev.2.2_00

(c) S-1137 Series C type

(d) S-1137 Series D type

Product code

Product Name

(1)

V

(2)

J

(3)

C

D

E

F

(1)

V

(2)

K

(3)

C

D

E

F

S-1137C12-U5T1x

S-1137C13-U5T1x

S-1137C14-U5T1x

S-1137C15-U5T1x

S-1137C16-U5T1x

S-1137C17-U5T1x

S-1137C18-U5T1x

S-1137C1J-U5T1x

S-1137C19-U5T1x

S-1137C20-U5T1x

S-1137C21-U5T1x

S-1137C22-U5T1x

S-1137C23-U5T1x

S-1137C24-U5T1x

S-1137C25-U5T1x

S-1137C26-U5T1x

S-1137C27-U5T1x

S-1137C28-U5T1x

S-1137C2J-U5T1x

S-1137C29-U5T1x

S-1137C30-U5T1x

S-1137C31-U5T1x

S-1137C32-U5T1x

S-1137C33-U5T1x

S-1137C34-U5T1x

S-1137C35-U5T1x

Remark1. x: G or U

S-1137D12-U5T1x

S-1137D13-U5T1x

S-1137D14-U5T1x

S-1137D15-U5T1x

S-1137D16-U5T1x

S-1137D17-U5T1x

S-1137D18-U5T1x

S-1137D1J-U5T1x

S-1137D19-U5T1x

S-1137D20-U5T1x

S-1137D21-U5T1x

S-1137D22-U5T1x

S-1137D23-U5T1x

S-1137D24-U5T1x

S-1137D25-U5T1x

S-1137D26-U5T1x

S-1137D27-U5T1x

S-1137D28-U5T1x

S-1137D2J-U5T1x

S-1137D29-U5T1x

S-1137D30-U5T1x

S-1137D31-U5T1x

S-1137D32-U5T1x

S-1137D33-U5T1x

S-1137D34-U5T1x

S-1137D35-U5T1x

G

H

I

G

H

I

J

K

L

K

L

M

N

O

P

Q

R

S

T

M

N

O

P

Q

R

S

T

U

V

W

X

Y

Z

U

V

W

X

Y

Z

2

3

2. Please select products of environmental code = U for Sn 100%, halogen-free products.

32

5.5 V INPUT, 300 mA VOLTAGE REGULATOR WITH SOFT-START FUNCTION

S-1137 Series

Rev.2.2_00

2. SOT-23-5

Top view

(1) to (3)

(4)

: Product code (Refer to Product name vs. Product code)

: Lot number

5

4

(1) (2) (3) (4)

1

2

3

Product name vs. Product code

(a) S-1137 Series A type

(b) S-1137 Series B type

Product code

Product Name

(1)

V

(2)

H

(3)

C

D

E

F

(1)

V

(2)

I

(3)

C

D

E

F

S-1137A12-M5T1y

S-1137A13-M5T1y

S-1137A14-M5T1y

S-1137A15-M5T1y

S-1137A16-M5T1y

S-1137A17-M5T1y

S-1137A18-M5T1y

S-1137A1J-M5T1y

S-1137A19-M5T1y

S-1137A20-M5T1y

S-1137A21-M5T1y

S-1137A22-M5T1y

S-1137A23-M5T1y

S-1137A24-M5T1y

S-1137A25-M5T1y

S-1137A26-M5T1y

S-1137A27-M5T1y

S-1137A28-M5T1y

S-1137A2J-M5T1y

S-1137A29-M5T1y

S-1137A30-M5T1y

S-1137A31-M5T1y

S-1137A32-M5T1y

S-1137A33-M5T1y

S-1137A34-M5T1y

S-1137A35-M5T1y

Remark1. y: S or U

S-1137B12-M5T1y

S-1137B13-M5T1y

S-1137B14-M5T1y

S-1137B15-M5T1y

S-1137B16-M5T1y

S-1137B17-M5T1y

S-1137B18-M5T1y

S-1137B1J-M5T1y

S-1137B19-M5T1y

S-1137B20-M5T1y

S-1137B21-M5T1y

S-1137B22-M5T1y

S-1137B23-M5T1y

S-1137B24-M5T1y

S-1137B25-M5T1y

S-1137B26-M5T1y

S-1137B27-M5T1y

S-1137B28-M5T1y

S-1137B2J-M5T1y

S-1137B29-M5T1y

S-1137B30-M5T1y

S-1137B31-M5T1y

S-1137B32-M5T1y

S-1137B33-M5T1y

S-1137B34-M5T1y

S-1137B35-M5T1y

I

G

H

I

G

H

I

J

I

J

K

L

I

K

L

I

M

N

O

P

Q

R

S

T

I

M

N

O

P

Q

R

S

T

I

U

V

W

X

Y

Z

I

U

V

W

X

Y

Z

I

2

I

2

3

I

3

2. Please select products of environmental code = U for Sn 100%, halogen-free products.

33

5.5 V INPUT, 300 mA VOLTAGE REGULATOR WITH SOFT-START FUNCTION

S-1137 Series

Rev.2.2_00

(c) S-1137 Series C type

(d) S-1137 Series D type

Product code

Product Name

(1)

V

(2)

J

(3)

C

D

E

F

(1)

V

(2)

K

(3)

C

D

E

F

S-1137C12-M5T1y

S-1137C13-M5T1y

S-1137C14-M5T1y

S-1137C15-M5T1y

S-1137C16-M5T1y

S-1137C17-M5T1y

S-1137C18-M5T1y

S-1137C1J-M5T1y

S-1137C19-M5T1y

S-1137C20-M5T1y

S-1137C21-M5T1y

S-1137C22-M5T1y

S-1137C23-M5T1y

S-1137C24-M5T1y

S-1137C25-M5T1y

S-1137C26-M5T1y

S-1137C27-M5T1y

S-1137C28-M5T1y

S-1137C2J-M5T1y

S-1137C29-M5T1y

S-1137C30-M5T1y

S-1137C31-M5T1y

S-1137C32-M5T1y

S-1137C33-M5T1y

S-1137C34-M5T1y

S-1137C35-M5T1y

Remark1. y: S or U

S-1137D12-M5T1y

S-1137D13-M5T1y

S-1137D14-M5T1y

S-1137D15-M5T1y

S-1137D16-M5T1y

S-1137D17-M5T1y

S-1137D18-M5T1y

S-1137D1J-M5T1y

S-1137D19-M5T1y

S-1137D20-M5T1y

S-1137D21-M5T1y

S-1137D22-M5T1y

S-1137D23-M5T1y

S-1137D24-M5T1y

S-1137D25-M5T1y

S-1137D26-M5T1y

S-1137D27-M5T1y

S-1137D28-M5T1y

S-1137D2J-M5T1y

S-1137D29-M5T1y

S-1137D30-M5T1y

S-1137D31-M5T1y

S-1137D32-M5T1y

S-1137D33-M5T1y

S-1137D34-M5T1y

S-1137D35-M5T1y

G

H

I

G

H

I

J

K

L

K

L

M

N

O

P

Q

R

S

T

M

N

O

P

Q

R

S

T

U

V

W

X

Y

Z

U

V

W

X

Y

Z

2

3

2. Please select products of environmental code = U for Sn 100%, halogen-free products.

34

5.5 V INPUT, 300 mA VOLTAGE REGULATOR WITH SOFT-START FUNCTION

S-1137 Series

Rev.2.2_00

3. SNT-6A(H)

Top view

(1) to (3)

(4) to (6)

: Product code (Refer to Product name vs. Product code)

: Lot number

6

5

4

(1) (2) (3)

(4) (5) (6)

1

2

3

Product name vs. Product code

(a) S-1137 Series A type

(b) S-1137 Series B type

Product code

Product Name

(1)

V

(2)

H

(3)

C

D

E

F

(1)

V

(2)

I

(3)

C

D

E

F

S-1137A12-I6T2U

S-1137A13-I6T2U

S-1137A14-I6T2U

S-1137A15-I6T2U

S-1137A16-I6T2U

S-1137A17-I6T2U

S-1137A18-I6T2U

S-1137A1J-I6T2U

S-1137A19-I6T2U

S-1137A20-I6T2U

S-1137A21-I6T2U

S-1137A22-I6T2U

S-1137A23-I6T2U

S-1137A24-I6T2U

S-1137A25-I6T2U

S-1137A26-I6T2U

S-1137A27-I6T2U

S-1137A28-I6T2U

S-1137A2J-I6T2U

S-1137A29-I6T2U

S-1137A30-I6T2U

S-1137A31-I6T2U

S-1137A32-I6T2U

S-1137A33-I6T2U

S-1137A34-I6T2U

S-1137A35-I6T2U

S-1137B12-I6T2U

S-1137B13-I6T2U

S-1137B14-I6T2U

S-1137B15-I6T2U

S-1137B16-I6T2U

S-1137B17-I6T2U

S-1137B18-I6T2U

S-1137B1J-I6T2U

S-1137B19-I6T2U

S-1137B20-I6T2U

S-1137B21-I6T2U

S-1137B22-I6T2U

S-1137B23-I6T2U

S-1137B24-I6T2U

S-1137B25-I6T2U

S-1137B26-I6T2U

S-1137B27-I6T2U

S-1137B28-I6T2U

S-1137B2J-I6T2U

S-1137B29-I6T2U

S-1137B30-I6T2U

S-1137B31-I6T2U

S-1137B32-I6T2U

S-1137B33-I6T2U

S-1137B34-I6T2U

S-1137B35-I6T2U

I

G

H

I

G

H

I

J

I

J

K

L

I

K

L

I

M

N

O

P

Q

R

S

T

I

M

N

O

P

Q

R

S

T

I

U

V

W

X

Y

Z

I

U

V

W

X

Y

Z

I

2

I

2

3

I

3

35

5.5 V INPUT, 300 mA VOLTAGE REGULATOR WITH SOFT-START FUNCTION

S-1137 Series

Rev.2.2_00

(c) S-1137 Series C type

(d) S-1137 Series D type

Product code

Product Name

(1)

V

(2)

J

(3)

C

D

E

F

(1)

V

(2)

K

(3)

C

D

E

F

S-1137C12-I6T2U

S-1137C13-I6T2U

S-1137C14-I6T2U

S-1137C15-I6T2U

S-1137C16-I6T2U

S-1137C17-I6T2U

S-1137C18-I6T2U

S-1137C1J-I6T2U

S-1137C19-I6T2U

S-1137C20-I6T2U

S-1137C21-I6T2U

S-1137C22-I6T2U

S-1137C23-I6T2U

S-1137C24-I6T2U

S-1137C25-I6T2U

S-1137C26-I6T2U

S-1137C27-I6T2U

S-1137C28-I6T2U

S-1137C2J-I6T2U

S-1137C29-I6T2U

S-1137C30-I6T2U

S-1137C31-I6T2U

S-1137C32-I6T2U

S-1137C33-I6T2U

S-1137C34-I6T2U

S-1137C35-I6T2U

S-1137D12-I6T2U

S-1137D13-I6T2U

S-1137D14-I6T2U

S-1137D15-I6T2U

S-1137D16-I6T2U

S-1137D17-I6T2U

S-1137D18-I6T2U

S-1137D1J-I6T2U

S-1137D19-I6T2U

S-1137D20-I6T2U

S-1137D21-I6T2U

S-1137D22-I6T2U

S-1137D23-I6T2U

S-1137D24-I6T2U

S-1137D25-I6T2U

S-1137D26-I6T2U

S-1137D27-I6T2U

S-1137D28-I6T2U

S-1137D2J-I6T2U

S-1137D29-I6T2U

S-1137D30-I6T2U

S-1137D31-I6T2U

S-1137D32-I6T2U

S-1137D33-I6T2U

S-1137D34-I6T2U

S-1137D35-I6T2U

G

H

I

G

H

I

J

K

L

K

L

M

N

O

P

Q

R

S

T

M

N

O

P

Q

R

S

T

U

V

W

X

Y

Z

U

V

W

X

Y

Z

2

3

36

4.5±0.1

1.6±0.2

1.5±0.1

5

4

0.3

45°

1

2

3

1.5±0.1 1.5±0.1

0.4±0.05

0.4±0.1

0.45±0.1

No. UP005-A-P-SD-2.0

SOT895-A-PKG Dimensions

UP005-A-P-SD-2.0

TITLE

No.

ANGLE

mm

UNIT

ABLIC Inc.

4.0±0.1(10 pitches : 40.0±0.2)

+0.1

-0

ø1.5

2.0±0.05

+0.1

-0

0.3±0.05

2.0±0.1

8.0±0.1

ø1.5

4.75±0.1

3

4

2

1

5

Feed direction

No. UP005-A-C-SD-2.0

TITLE

SOT895-A-Carrier Tape

UP005-A-C-SD-2.0

No.

ANGLE

mm

UNIT

ABLIC Inc.

16.5max.

13.0±0.3

Enlarged drawing in the central part

(60°)

No. UP005-A-R-SD-1.1

TITLE

SOT895-A-Reel

UP005-A-R-SD-1.1

No.

ANGLE

QTY.

1,000

mm

UNIT

ABLIC Inc.

2.9±0.2

1.9±0.2

4

5

+0.1

-0.06

1

2

3

0.16

0.95±0.1

0.4±0.1

No. MP005-A-P-SD-1.3

TITLE

SOT235-A-PKG Dimensions

MP005-A-P-SD-1.3

No.

ANGLE

UNIT

mm

ABLIC Inc.

4.0±0.1(10 pitches:40.0±0.2)

+0.1

-0

2.0±0.05

0.25±0.1

ø1.5

+0.2

-0

4.0±0.1

ø1.0

1.4±0.2

3.2±0.2

3

4

2 1

5

Feed direction

No. MP005-A-C-SD-2.1

TITLE

SOT235-A-Carrier Tape

MP005-A-C-SD-2.1

No.

ANGLE

UNIT

mm

ABLIC Inc.

12.5max.

9.0±0.3

Enlarged drawing in the central part

ø13±0.2

(60°)

No. MP005-A-R-SD-1.1

TITLE

SOT235-A-Reel

MP005-A-R-SD-1.1

No.

ANGLE

UNIT

QTY.

3,000

mm

ABLIC Inc.

1.57±0.03

6

4

5

+0.05

-0.02

0.08

1

2

3

0.5

0.48±0.02

0.2±0.05

No. PI006-A-P-SD-2.1

SNT-6A(H)-A-PKG Dimensions

PI006-A-P-SD-2.1

TITLE

No.

ANGLE

UNIT

mm

ABLIC Inc.

+0.1

-0

ø1.5

4.0±0.1

2.0±0.05

0.25±0.05

+0.1

ø0.5

-0

4.0±0.1

0.65±0.05

1.85±0.05

3

2

5

1

6

4

Feed direction

No. PI006-A-C-SD-2.0

TITLE

SNT-6A(H)-A-Carrier Tape

PI006-A-C-SD-2.0

No.

ANGLE

UNIT

mm

ABLIC Inc.

12.5max.

9.0±0.3

Enlarged drawing in the central part

ø13±0.2

(60°)

No. PI006-A-R-SD-1.0

TITLE

SNT-6A(H)-A-Reel

PI006-A-R-SD-1.0

No.

ANGLE

UNIT

QTY.

5,000

mm

ABLIC Inc.

0.52

2

1.36

0.52

1

0.3

0.2

1.

2.

(0.25 mm min. / 0.30 mm typ.)

(1.30 mm ~ 1.40 mm)

1.

2.

0.03 mm

3.

4.

SNT

1. Pay attention to the land pattern width (0.25 mm min. / 0.30 mm typ.).

2. Do not widen the land pattern to the center of the package (1.30 mm to 1.40 mm).

Caution 1. Do not do silkscreen printing and solder printing under the mold resin of the package.

2. The thickness of the solder resist on the wire pattern under the package should be 0.03 mm

or less from the land pattern surface.

3. Match the mask aperture size and aperture position with the land pattern.

4. Refer to "SNT Package User's Guide" for details.

(0.25 mm min. / 0.30 mm typ.)

(1.30 mm ~ 1.40 mm)

1.

2.

SNT-6A(H)-A

-Land Recommendation

TITLE

No. PI006-A-L-SD-4.1

No.

PI006-A-L-SD-4.1

ANGLE

UNIT

mm

ABLIC Inc.

Disclaimers (Handling Precautions)

1. All the information described herein (product data, specifications, figures, tables, programs, algorithms and application

circuit examples, etc.) is current as of publishing date of this document and is subject to change without notice.

2. The circuit examples and the usages described herein are for reference only, and do not guarantee the success of

any specific mass-production design.

ABLIC Inc. is not responsible for damages caused by the reasons other than the products described herein

(hereinafter "the products") or infringement of third-party intellectual property right and any other right due to the use

of the information described herein.

3. ABLIC Inc. is not responsible for damages caused by the incorrect information described herein.

4. Be careful to use the products within their specified ranges. Pay special attention to the absolute maximum ratings,

operation voltage range and electrical characteristics, etc.

ABLIC Inc. is not responsible for damages caused by failures and / or accidents, etc. that occur due to the use of the

products outside their specified ranges.

5. When using the products, confirm their applications, and the laws and regulations of the region or country where they

are used and verify suitability, safety and other factors for the intended use.

6. When exporting the products, comply with the Foreign Exchange and Foreign Trade Act and all other export-related

laws, and follow the required procedures.

7. The products must not be used or provided (exported) for the purposes of the development of weapons of mass

destruction or military use. ABLIC Inc. is not responsible for any provision (export) to those whose purpose is to

develop, manufacture, use or store nuclear, biological or chemical weapons, missiles, or other military use.

8. The products are not designed to be used as part of any device or equipment that may affect the human body, human

life, or assets (such as medical equipment, disaster prevention systems, security systems, combustion control

systems, infrastructure control systems, vehicle equipment, traffic systems, in-vehicle equipment, aviation equipment,

aerospace equipment, and nuclear-related equipment), excluding when specified for in-vehicle use or other uses. Do

not apply the products to the above listed devices and equipments without prior written permission by ABLIC Inc.

Especially, the products cannot be used for life support devices, devices implanted in the human body and devices

that directly affect human life, etc.

Prior consultation with our sales office is required when considering the above uses.

ABLIC Inc. is not responsible for damages caused by unauthorized or unspecified use of our products.

9. Semiconductor products may fail or malfunction with some probability.

The user of the products should therefore take responsibility to give thorough consideration to safety design including

redundancy, fire spread prevention measures, and malfunction prevention to prevent accidents causing injury or

death, fires and social damage, etc. that may ensue from the products' failure or malfunction.

The entire system must be sufficiently evaluated and applied on customer's own responsibility.

10. The products are not designed to be radiation-proof. The necessary radiation measures should be taken in the

product design by the customer depending on the intended use.

11. The products do not affect human health under normal use. However, they contain chemical substances and heavy

metals and should therefore not be put in the mouth. The fracture surfaces of wafers and chips may be sharp. Be

careful when handling these with the bare hands to prevent injuries, etc.

12. When disposing of the products, comply with the laws and ordinances of the country or region where they are used.

13. The information described herein contains copyright information and know-how of ABLIC Inc.

The information described herein does not convey any license under any intellectual property rights or any other

rights belonging to ABLIC Inc. or a third party. Reproduction or copying of the information from this document or any

part of this document described herein for the purpose of disclosing it to a third-party without the express permission

of ABLIC Inc. is strictly prohibited.

14. For more details on the information described herein, contact our sales office.

2.2-2018.06

www.ablic.com


型号：	S-1137A22-I6T2U
厂家：	ABLIC
描述：	5.5 V INPUT, 300 mA VOLTAGE REGULATOR WITH SOFT-START FUNCTION 输入元件
文件：	总47页 (文件大小：791K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

S-1137A22-I6T2U [ABLIC]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E