S-1206B52-M3T1X [ABLIC]
ULTRA LOW CURRENT CONSUMPTION AND LOW DROPOUT CMOS VOLTAGE REGULATOR;
| 型号： | S-1206B52-M3T1X |
| 厂家： | 
ABLIC |
| 描述： | ULTRA LOW CURRENT CONSUMPTION AND LOW DROPOUT CMOS VOLTAGE REGULATOR |
| 文件： | 总35页 (文件大小：566K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
S-1206 Series
ULTRA LOW CURRENT CONSUMPTION AND
LOW DROPOUT CMOS VOLTAGE REGULATOR
www.ablic.com
© ABLIC Inc., 2006-2015
Rev.3.2_02
The S-1206 Series is a positive voltage regulator with ultra low current consumption, low dropout voltage, high-accuracy
output voltage, and 250 mA output current developed based on CMOS technology.
I/O capacitors are as small as 0.1 F. S-1206 Series operates at ultra low current consumption of 1.0 A (typ.).
The built-in low-on-resistance transistor realizes low dropout voltage and a large output current. A built-in overcurrent
protection circuit prevents the load current from exceeding the current capacity of the output transistor.
Three packages, SOT-23-3, SOT-89-3, and SNT-6A(H) are available.
Compared with voltage regulators using a conventional CMOS technology, more types of capacitors, including small I/O
capacitors, can be used with the S-1206 Series. The S-1206 Series features ultra low current consumption and comes in a
small package, making them most suitable for portable equipment.
Features
Output voltage:
Input voltage:
1.2 V to 5.2 V, selectable in 0.05 V step
1.7 V to 6.5 V
Output voltage accuracy:
Dropout voltage:
Current consumption:
Output current:
Input and output capacitors:
Built-in overcurrent protection circuit:
Operation temperature range:
Lead-free, Sn 100%, halogen-free*2
1.0% (1.2 V to 1.45 V output product: 15 mV)
150 mV typ. (3.0 V output product, IOUT = 100 mA)
During operation: 1.0 A typ., 1.5 A max.
Possible to output 250 mA (3.0 V output product, VIN VOUT(S) 1.0 V)*1
A ceramic capacitor of 0.1 F or more can be used.
Limits overcurrent of output transistor.
Ta = 40°C to 85°C
*1. Attention should be paid to the power dissipation of the package when the output current is large.
*2. Refer to “ Product Name Structure” for details.
Applications
Constant-voltage power supply for battery-powered device
Constant-voltage power supply for cellular phone
Constant-voltage power supply for portable equipment
Packages
SOT-23-3
SOT-89-3
SNT-6A(H)
1
ULTRA LOW CURRENT CONSUMPTION AND LOW DROPOUT CMOS VOLTAGE REGULATOR
S-1206 Series
Rev.3.2_02
Block Diagram
*1
VIN
VOUT
Overcurrent
protection circuit
Reference
voltage circuit
VSS
*1. Parasitic diode
Figure 1
2
ULTRA LOW CURRENT CONSUMPTION AND LOW DROPOUT CMOS VOLTAGE REGULATOR
Rev.3.2_02
S-1206 Series
Product Name Structure
The output voltage value and package types for the S-1206 Series can be selected at the user’s request. Refer to
“1. Product Name” regarding the contents of product name, “2. Packages” regarding the package drawings and
“3. Product Name List” regarding details of the product name.
1. Product Name
1. 1 SOT-23-3, SOT-89-3
S-1206
B
xx
-
xxxx
x
Environmental code
U :
G :
Lead-free (Sn 100%), halogen-free
Lead-free (for details, please contact our sales office)
Package name (abbreviation) and packing specifications*1
M3T1 : SOT-23-3, Tape
U3T1 : SOT-89-3, Tape
Output voltage value
12 to 52
(e.g. When output voltage is 1.2 V, it is expressed as 12.)
*1. Refer to the tape drawing.
1. 2 SNT-6A(H)
S-1206 xx
B
-
I6T2
U
Environmental code
U :
Lead-free (Sn 100%), halogen-free
Package name (abbreviation) and packing specifications*1
I6T2 : SNT-6A(H), Tape
Output voltage value
12 to 52
(e.g. When output voltage is 1.2 V, it is expressed as 12.)
*1. Refer to the tape drawing.
2. Packages
Drawing Code
Package Name
SOT-23-3
Package
Tape
Reel
Land
MP003-C-P-SD
UP003-A-P-SD
PI006-A-P-SD
MP003-C-C-SD
UP003-A-C-SD
PI006-A-C-SD
MP003-Z-R-SD
UP003-A-R-SD
PI006-A-R-SD
SOT-89-3
SNT-6A(H)
PI006-A-L-SD
3
ULTRA LOW CURRENT CONSUMPTION AND LOW DROPOUT CMOS VOLTAGE REGULATOR
S-1206 Series
Rev.3.2_02
3. Product Name List
Table 1
Output Voltage
1.2 V 15 mV
1.3 V 15 mV
1.4 V 15 mV
1.5 V 1.0%
1.6 V 1.0%
1.7 V 1.0%
1.8 V 1.0%
1.85 V 1.0%
1.9 V 1.0%
2.0 V 1.0%
2.1 V 1.0%
2.2 V 1.0%
2.3 V 1.0%
2.4 V 1.0%
2.5 V 1.0%
2.6 V 1.0%
2.7 V 1.0%
2.8 V 1.0%
2.85 V 1.0%
2.9 V 1.0%
3.0 V 1.0%
3.1 V 1.0%
3.2 V 1.0%
3.3 V 1.0%
3.4 V 1.0%
3.5 V 1.0%
3.6 V 1.0%
3.7 V 1.0%
3.8 V 1.0%
3.9 V 1.0%
4.0 V 1.0%
4.1 V 1.0%
4.2 V 1.0%
4.3 V 1.0%
4.4 V 1.0%
4.5 V 1.0%
4.6 V 1.0%
4.7 V 1.0%
4.8 V 1.0%
4.9 V 1.0%
5.0 V 1.0%
5.1 V 1.0%
5.2 V 1.0%
SOT-23-3
SOT-89-3
SNT-6A(H)
S-1206B12-I6T2U
S-1206B13-I6T2U
S-1206B14-I6T2U
S-1206B15-I6T2U
S-1206B16-I6T2U
S-1206B17-I6T2U
S-1206B18-I6T2U
S-1206B1J-I6T2U
S-1206B19-I6T2U
S-1206B20-I6T2U
S-1206B21-I6T2U
S-1206B22-I6T2U
S-1206B23-I6T2U
S-1206B24-I6T2U
S-1206B25-I6T2U
S-1206B26-I6T2U
S-1206B27-I6T2U
S-1206B28-I6T2U
S-1206B2J-I6T2U
S-1206B29-I6T2U
S-1206B30-I6T2U
S-1206B31-I6T2U
S-1206B32-I6T2U
S-1206B33-I6T2U
S-1206B34-I6T2U
S-1206B35-I6T2U
S-1206B36-I6T2U
S-1206B37-I6T2U
S-1206B38-I6T2U
S-1206B39-I6T2U
S-1206B40-I6T2U
S-1206B41-I6T2U
S-1206B42-I6T2U
S-1206B43-I6T2U
S-1206B44-I6T2U
S-1206B45-I6T2U
S-1206B46-I6T2U
S-1206B47-I6T2U
S-1206B48-I6T2U
S-1206B49-I6T2U
S-1206B50-I6T2U
S-1206B51-I6T2U
S-1206B52-I6T2U
S-1206B12-M3T1x
S-1206B13-M3T1x
S-1206B14-M3T1x
S-1206B15-M3T1x
S-1206B16-M3T1x
S-1206B17-M3T1x
S-1206B18-M3T1x
S-1206B1J-M3T1x
S-1206B19-M3T1x
S-1206B20-M3T1x
S-1206B21-M3T1x
S-1206B22-M3T1x
S-1206B23-M3T1x
S-1206B24-M3T1x
S-1206B25-M3T1x
S-1206B26-M3T1x
S-1206B27-M3T1x
S-1206B28-M3T1x
S-1206B2J-M3T1x
S-1206B29-M3T1x
S-1206B30-M3T1x
S-1206B31-M3T1x
S-1206B32-M3T1x
S-1206B33-M3T1x
S-1206B34-M3T1x
S-1206B35-M3T1x
S-1206B36-M3T1x
S-1206B37-M3T1x
S-1206B38-M3T1x
S-1206B39-M3T1x
S-1206B40-M3T1x
S-1206B41-M3T1x
S-1206B42-M3T1x
S-1206B43-M3T1x
S-1206B44-M3T1x
S-1206B45-M3T1x
S-1206B46-M3T1x
S-1206B47-M3T1x
S-1206B48-M3T1x
S-1206B49-M3T1x
S-1206B50-M3T1x
S-1206B51-M3T1x
S-1206B52-M3T1x
S-1206B12-U3T1x
S-1206B13-U3T1x
S-1206B14-U3T1x
S-1206B15-U3T1x
S-1206B16-U3T1x
S-1206B17-U3T1x
S-1206B18-U3T1x
S-1206B1J-U3T1x
S-1206B19-U3T1x
S-1206B20-U3T1x
S-1206B21-U3T1x
S-1206B22-U3T1x
S-1206B23-U3T1x
S-1206B24-U3T1x
S-1206B25-U3T1x
S-1206B26-U3T1x
S-1206B27-U3T1x
S-1206B28-U3T1x
S-1206B2J-U3T1x
S-1206B29-U3T1x
S-1206B30-U3T1x
S-1206B31-U3T1x
S-1206B32-U3T1x
S-1206B33-U3T1x
S-1206B34-U3T1x
S-1206B35-U3T1x
S-1206B36-U3T1x
S-1206B37-U3T1x
S-1206B38-U3T1x
S-1206B39-U3T1x
S-1206B40-U3T1x
S-1206B41-U3T1x
S-1206B42-U3T1x
S-1206B43-U3T1x
S-1206B44-U3T1x
S-1206B45-U3T1x
S-1206B46-U3T1x
S-1206B47-U3T1x
S-1206B48-U3T1x
S-1206B49-U3T1x
S-1206B50-U3T1x
S-1206B51-U3T1x
S-1206B52-U3T1x
Remark1. Please contact our sales office for products with output voltage values other than the above.
2. x: G or U
3. Please select products of environmental code = U for Sn 100%, halogen-free products.
4
ULTRA LOW CURRENT CONSUMPTION AND LOW DROPOUT CMOS VOLTAGE REGULATOR
Rev.3.2_02
S-1206 Series
Pin Configurations
Table 2
SOT-23-3
Top view
Pin No.
Symbol
VIN
Description
1
1
2
3
Input voltage pin
VSS
GND pin
VOUT
Output voltage pin
2
3
Figure 2
SOT-89-3
Top view
Table 3
Pin No.
Symbol
VSS
Description
1
2
3
GND pin
VIN
Input voltage pin
VOUT
Output voltage pin
1
2
3
Figure 3
Table 4
SNT-6A(H)
Top view
Pin No.
Symbol
VOUT
VIN
Description
Output voltage pin
Input voltage pin
GND pin
1
2
3
4
5
6
1
2
3
6
5
4
VSS
NC*1
VIN
No connection
Input voltage pin
No connection
NC*1
Figure 4
*1. The NC pin is electrically open.
The NC pin can be connected to VIN or VSS.
5
ULTRA LOW CURRENT CONSUMPTION AND LOW DROPOUT CMOS VOLTAGE REGULATOR
S-1206 Series
Rev.3.2_02
Absolute Maximum Ratings
Table 5
(Ta = 25C unless otherwise specified)
Item
Input voltage
Output voltage
SOT-23-3
Symbol
VIN
Absolute Maximum Rating
Unit
V
VSS 0.3 to VSS 7
VSS 0.3 to VIN 0.3
430*1
VOUT
V
mW
mW
mW
C
Power dissipation
SOT-89-3
PD
1000*1
500*1
SNT-6A(H)
Operation ambient temperature
Storage temperature
Topr
Tstg
40 to 85
40 to 125
C
*1. When mounted on board
[Mounted board]
(1) Board size : 114.3 mm 76.2 mm t1.6 mm
(2) Board name : JEDEC STANDARD51-7
Caution The absolute maximum ratings are rated values exceeding which the product could suffer physical
damage. These values must therefore not be exceeded under any conditions.
1200
SOT-89-3
1000
800
SNT-6A(H)
600
SOT-23-3
400
200
0
100
150
50
0
Ambient Temperature (Ta) [C]
Figure 5 Power Dissipation of Package (When Mounted on Board)
6
ULTRA LOW CURRENT CONSUMPTION AND LOW DROPOUT CMOS VOLTAGE REGULATOR
Rev.3.2_02
S-1206 Series
Electrical Characteristics
Table 6
(Ta = 25C unless otherwise specified)
Test
Circuit
Item
Symbol
Conditions
Min.
Typ.
Max.
Unit
VOUT(S)
VOUT(S)
V
IN = VOUT(S)
1.2 V VOUT(S) < 1.5 V
VIN = VOUT(S) 1.0 V, IOUT = 30 mA,
1.5 V VOUT(S)
1.0 V, IOUT = 30 mA,
VOUT(S)
VOUT(S)
V
1
15 mV
15 mV
Output voltage*1
Output current*2
VOUT(E)
VOUT(S)
VOUT(S)
V
1
0.99
1.01
150*5
mA
mA
V
3
3
1
1
1
1
1
1
1
1
1
VIN
VIN
VOUT(S)
VOUT(S)
1.0 V, 1.2 V
1.0 V, 1.5 V
VOUT(S) < 1.5 V
VOUT(S)
IOUT
250*5
0.5
0.54
0.50
0.43
0.35
0.33
0.26
0.23
0.15
0.05
0.81
0.73
0.66
0.53
0.50
0.43
0.36
0.23
0.2
1.2 V
1.3 V
1.4 V
1.5 V
1.7 V
1.9 V
2.1 V
3.0 V
VOUT(S) < 1.3 V
VOUT(S) < 1.4 V
VOUT(S) < 1.5 V
VOUT(S) < 1.7 V
VOUT(S) < 1.9 V
VOUT(S) < 2.1 V
VOUT(S) < 3.0 V
V
V
V
Dropout voltage*3
Vdrop
IOUT = 100 mA
V
V
V
V
VOUT(S)
5.2 V
VOUT(S) 0.5 V VIN 6.5 V
VOUT1
VIN VOUT
VOUT2
VOUT
%/V
IOUT = 1
IOUT = 30 mA
1.0 V, 1 IOUT
1.0 V, IOUT = 30 mA,
A
Line regulation
Load regulation
0.05
20
0.2
40
%/V
mV
1
1
VIN = VOUT(S)
VIN = VOUT(S)
A
100 mA
Output voltage
temperature
coefficient*4
1
120
ppm/C
Ta VOUT
40°C
Ta 85°C
Current consumption
during operation
Input voltage
ISS1
VIN
1.0
1.5
2
VIN = VOUT(S)
1.0 V, no load
A
1.7
6.5
V
130
3
3
mA
mA
VIN = VOUT(S)
OUT = 0 V
1.0 V, 1.2 V
2.3 V
VOUT < 2.3 V
Short-circuit current ISHORT
V
100
VOUT
5.2 V
*1. VOUT(S) : Set output voltage
VOUT(E) : Actual output voltage
Output voltage when fixing IOUT (= 30 mA) and inputting VOUT(S) 1.0 V
*2. The output current at which the output voltage becomes 95% of VOUT(E) after gradually increasing the output current.
*3. Vdrop = VIN1 (VOUT3 0.98)
VOUT3 is the output voltage when VIN = VOUT(S) 1.0 V and IOUT = 100 mA.
VIN1 is the input voltage at which the output voltage becomes 98% of VOUT3 after gradually decreasing the input
voltage.
*4. A change in the temperature of the output voltage [mV/°C] is calculated using the following equation.
VOUT
Ta
VOUT
Ta VOUT
mV/°C *1 = VOUT(S)
V
[ ]
*2
ppm/°C *3 1000
[
]
[ ]
*1. Change in temperature of output voltage
*2. Set output voltage
*3. Output voltage temperature coefficient
*5. The output current can be at least this value.
Due to restrictions on the package power dissipation, this value may not be satisfied. Attention should be paid to the
power dissipation of the package when the output current is large.
This specification is guaranteed by design.
7
ULTRA LOW CURRENT CONSUMPTION AND LOW DROPOUT CMOS VOLTAGE REGULATOR
S-1206 Series
Rev.3.2_02
Test Circuits
1.
VIN
VIN
VIN
VOUT
A
V
VSS
Figure 6
2.
VOUT
A
VSS
Figure 7
3.
VOUT
A
V
VSS
Figure 8
8
ULTRA LOW CURRENT CONSUMPTION AND LOW DROPOUT CMOS VOLTAGE REGULATOR
Rev.3.2_02
S-1206 Series
Standard Circuit
Input
Output
VIN
VOUT
*1
*2
CIN
CL
VSS
Single GND
GND
*1. A capacitor for stabilizing the input.
*2. A ceramic capacitor of 0.1 F or more can be used.
Figure 9
Caution The above connection diagram and constant will not guarantee successful operation. Perform
thorough evaluation using the actual application to set the constant.
Condition of Application
Input capacitor (CIN): 0.1 F or more
Output capacitor (CL): 0.1 F or more
Caution Generally a series regulator may cause oscillation, depending on the selection of external parts.
Confirm that no oscillation occurs in the application for which the above capacitors are used.
Selection of Input and Output Capacitors (CIN, CL)
The S-1206 Series requires an output capacitor between the VOUT pin and VSS pin for phase compensation.
Operation is stabilized by a ceramic capacitor with an output capacitance of 0.1 F or more in the entire temperature
range. When using an OS capacitor, a tantalum capacitor, or an aluminum electrolytic capacitor, the capacitance must
be 0.1 F or more.
The value of the output overshoot or undershoot transient response varies depending on the value of the output
capacitor.
The required capacitance of the input capacitor differs depending on the application.
The recommended value for an application is CIN 0.1 F, CL 0.1 F; however, when selecting these capacitors,
perform sufficient evaluation, including evaluation of temperature characteristics, on the actual device.
9
ULTRA LOW CURRENT CONSUMPTION AND LOW DROPOUT CMOS VOLTAGE REGULATOR
S-1206 Series
Rev.3.2_02
Explanation of Terms
1. Low Dropout Voltage Regulator
This voltage regulator has the low dropout voltage due to its built-in low on-resistance transistor.
2. Low Equivalent Series Resistance
A capacitor whose equivalent series resistance (RESR) is low. The S-1206 Series enables use of a low equivalent
series resistance capacitor, such as a ceramic capacitor, for the output-side capacitor (CL).
3. Output Voltage (VOUT
)
The accuracy of the output voltage is ensured at 1.0% or 15 mV*2 under the specified conditions of fixed input
voltage*1, fixed output current, and fixed temperature.
*1. Differs depending on the product.
*2. When VOUT < 1.5 V : 15 mV, When 1.5 V VOUT : 1.0%
Caution If the above conditions change, the output voltage value may vary and exceed the accuracy range
of the output voltage. Refer to the “ Electrical Characteristics” and “ Characteristics (Typical
Data)” for details.
VOUT1
4. Line Regulation
VIN VOUT
Indicates the dependency of the output voltage on the input voltage. That is, the values show how much the output
voltage changes due to a change in the input voltage with the output current remaining unchanged.
5. Load Regulation (VOUT2
)
Indicates the dependency of the output voltage on the output current. That is, the values show how much the output
voltage changes due to a change in the output current with the input voltage remaining unchanged.
6. Dropout Voltage (Vdrop
)
Indicates the difference between input voltage (VIN1) and the output voltage when; decreasing input voltage (VIN)
gradually until the output voltage has dropped out to the value of 98% of output voltage (VOUT3), which is at VIN
=
VOUT(S) 1.0 V.
Vdrop = VIN1 (VOUT3 0.98)
10
ULTRA LOW CURRENT CONSUMPTION AND LOW DROPOUT CMOS VOLTAGE REGULATOR
Rev.3.2_02
S-1206 Series
VOUT
7. Output Voltage Temperature Coefficient
Ta VOUT
The shaded area in Figure 10 is the range where VOUT varies in the operation temperature range when the output
voltage temperature coefficient is 120 ppm/C.
Example of S-1206B30 typ. product
VOUT [V]
0.36 mV/C
*1
VOUT(E)
0.36 mV/C
40
25
85
Ta [C]
*1. VOUT(E) is the value of the output voltage measured at Ta = 25C.
Figure 10
A change in the temperature of the output voltage [mV/C] is calculated using the following equation.
VOUT
Ta
VOUT
Ta VOUT
mV/°C *1 = VOUT(S)
V
[ ]
*2
ppm/°C *3 1000
[
]
[ ]
*1. Change in temperature of output voltage
*2. Set output voltage
*3. Output voltage temperature coefficient
11
ULTRA LOW CURRENT CONSUMPTION AND LOW DROPOUT CMOS VOLTAGE REGULATOR
S-1206 Series
Rev.3.2_02
Operation
1. Basic Operation
Figure 11 shows the block diagram of the S-1206 Series.
The error amplifier compares the reference voltage (Vref) with feedback voltage (Vfb), which is the output voltage
resistance-divided by feedback resistors (Rs and Rf). It supplies the gate voltage necessary to maintain the constant
output voltage which is not influenced by the input voltage and temperature change, to the output transistor.
VIN
*1
Current
supply
Error
amplifier
VOUT
Vref
Rf
Vfb
Reference voltage
circuit
Rs
VSS
*1. Parasitic diode
Figure 11
2. Output Transistor
In the S-1206 Series, a low on-resistance P-channel MOS FET is used as the output transistor.
Be sure that VOUT does not exceed VIN 0.3 V to prevent the voltage regulator from being damaged due to reverse
current flowing from the VOUT pin through a parasitic diode to the VIN pin, when the potential of VOUT became higher
than VIN.
3. Overcurrent Protection Circuit
The S-1206 Series includes an overcurrent protection circuit having the characteristics shown in “1. Output Voltage
vs. Output Current (Ta = 25C)” in “ Characteristics (Typical Data)”, in order to protect the output transistor
against an excessive output current and short circuiting between the VOUT and VSS pins. The current when the
output pin is short-circuited (ISHORT) is internally set at approx. 130 mA (typ.) (1.2 V VOUT < 2.3 V) or approx. 100 mA
(typ.)
once.
(2.3 V VOUT 5.2 V), and the normal value is restored for the output voltage, if releasing a short circuit
Caution This overcurrent protection circuit does not work as for thermal protection. If this IC long keeps
short circuiting inside, pay attention to the conditions of input voltage and load current so that,
under the usage conditions including short circuit, the loss of the IC will not exceed power
dissipation of the package.
12
ULTRA LOW CURRENT CONSUMPTION AND LOW DROPOUT CMOS VOLTAGE REGULATOR
Rev.3.2_02
S-1206 Series
Precautions
Wiring patterns for the VIN pin, the VOUT pin and GND should be designed so that the impedance is low. When
mounting an output capacitor between the VOUT pin and the VSS pin (CL) and a capacitor for stabilizing the input
between the VIN pin and the VSS pin (CIN), the distance from the capacitors to these pins should be as short as
possible.
Note that generally the output voltage may increase when a series regulator is used at low load current (10 A or less).
Note that generally the output voltage may increase due to the leakage current from an output driver when a series
regulator is used at high temperature.
Generally a series regulator may cause oscillation, depending on the selection of external parts. The following
conditions are recommended for the S-1206 Series. However, be sure to perform sufficient evaluation under the
actual usage conditions for selection, including evaluation of temperature characteristics. Refer to “5. Equivalent
Series Resistance vs. Output Current Characteristics Example (Ta = 25C)” in “ Reference Data” for the
equivalent series resistance (RESR) of the output capacitor.
Input capacitor (CIN):
Output capacitor (CL):
0.1 F or more
0.1 F or more
Use an I/O capacitor with good temperature characteristics (conforming to the ceramic capacitor EIA X5R (JIS B)
characteristics).
The voltage regulator may oscillate when the impedance of the power supply is high and the input capacitance is small
or an input capacitor is not connected.
If the output capacitance is small, power supply's fluctuation and the characteristics of load fluctuation become worse.
Sufficiently evaluate the output voltage's fluctuation with the actual device.
Overshoot may occur in the output voltage momentarily if the voltage is rapidly raised at power-on or when the power
supply fluctuates. Sufficiently evaluate the output voltage at power-on with the actual device.
The application conditions for the input voltage, the output voltage, and the load current should not exceed the package
power dissipation.
Do not apply an electrostatic discharge to this IC that exceeds the performance ratings of the built-in electrostatic
protection circuit.
In determining the output current, attention should be paid to the output current value specified in Table 6 in “
Electrical Characteristics” and footnote *5 of the table.
ABLIC Inc. claims no responsibility for any disputes arising out of or in connection with any infringement by products
including this IC of patents owned by a third party.
13
ULTRA LOW CURRENT CONSUMPTION AND LOW DROPOUT CMOS VOLTAGE REGULATOR
S-1206 Series
Rev.3.2_02
Characteristics (Typical Data)
1. Output Voltage vs. Output Current (Ta = 25C)
S-1206B12
S-1206B30
3.5
1.4
V
IN = 3.5 V
5.0 V
V
IN = 2.2 V
3.2 V
1.2
1.0
0.8
3.0
2.5
2.0
6.5 V
6.5 V
3.3 V
4.0 V
1.5 V
1.7 V
0.6
0.4
0.2
1.5
1.0
0.5
0
0
400
400
500 600 700
0
100 200 300
500 600 700
0
100 200 300
IOUT [mA]
IOUT [mA]
S-1206B50
6
5
4
3
2
1
V
IN = 5.5 V
Remark In determining the output current, attention should
be paid to the following.
6.0 V
5.3 V
6.5 V
1. Minimum output current value specified in
Table 6 and footnote *5 in “ Electrical
Characteristics”
2. Power dissipation of package
0
400
500 600 700
0
100 200 300
IOUT [mA]
2. Output Voltage vs. Input Voltage (Ta = 25°C)
S-1206B12
S-1206B30
3.1
1.25
IOUT = 1 A
IOUT = 1 A
3.0
2.9
2.8
2.7
2.6
1.20
1.15
1.10
1.05
10 A
1 mA
30 mA
50 mA
100 mA
10 A
1 mA
30 mA
50 mA
100 mA
2.5
1.00
1.0
1.5
2.0
2.5
3.0
3.5
2.5
3.0
3.5
4.0
4.5
5.0
VIN [V]
VIN [V]
S-1206B50
5.1
IOUT = 1 A
5.0
4.9
4.8
4.7
4.6
10 A
1 mA
30 mA
50 mA
100 mA
4.5
4.5
5.0
5.5
6.0
6.5
VIN [V]
14
ULTRA LOW CURRENT CONSUMPTION AND LOW DROPOUT CMOS VOLTAGE REGULATOR
Rev.3.2_02
S-1206 Series
3. Dropout Voltage vs. Output Current
S-1206B12
S-1206B30
0.50
0.80
0.70
0.60
0.50
0.40
0.30
0.20
0.10
Ta = 85C
0.45
0.40
0.35
0.30
0.25
0.20
0.15
0.10
0.05
0
Ta = 85C
25C
25C
40C
40C
0
0
50
100 150 200 250 300
0
50
100
150
200
I
OUT [mA]
IOUT [mA]
S-1206B50
0.35
0.30
0.25
0.20
0.15
0.10
0.05
0
Ta = 85C
25C
40C
0
50
100 150 200 250 300
IOUT [mA]
4. Dropout Voltage vs. Set Output Voltage
0.80
I
OUT = 250 mA
0.70
0.60
0.50
0.40
0.30
0.20
0.10
0
150 mA
100 mA
50 mA
30 mA
10 mA
0
1
2
3
4
5
6
V
OUT(S) [V]
15
ULTRA LOW CURRENT CONSUMPTION AND LOW DROPOUT CMOS VOLTAGE REGULATOR
S-1206 Series
Rev.3.2_02
5. Output Voltage vs. Ambient Temperature
S-1206B12
S-1206B30
3.10
1.30
1.28
1.26
1.24
1.22
1.20
1.18
1.16
1.14
1.12
1.10
3.08
3.06
3.04
3.02
3.00
2.98
2.96
2.94
2.92
2.90
40 25
0
25
50
75 85
40 25
0
25
50
75 85
Ta [C]
Ta [C]
S-1206B50
5.10
5.08
5.06
5.04
5.02
5.00
4.98
4.96
4.94
4.92
4.90
40 25
0
25
50
75 85
Ta [C]
6. Current Consumption vs. Input Voltage
S-1206B12
S-1206B30
1.8
1.6
1.8
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0
1.4
Ta = 85C
Ta = 85C
1.2
1.0
0.8
0.6
0.4
0.2
0
25C
40C
25C
40C
0
1
2
3
4
5
6
7
0
1
2
3
4
5
6
7
VIN [V]
VIN [V]
S-1206B50
1.8
Ta = 85C
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0
25C
40C
0
1
2
3
4
5
6
7
VIN [V]
16
ULTRA LOW CURRENT CONSUMPTION AND LOW DROPOUT CMOS VOLTAGE REGULATOR
Rev.3.2_02
S-1206 Series
7. Current Consumption vs. Ambient Temperature
S-1206B12
S-1206B30
1.4
1.4
1.2
1.2
1.0
0.8
0.6
0.4
0.2
VIN = 4.0 V
VIN = 2.2 V
1.0
6.5 V
6.5 V
0.8
0.6
0.4
0.2
0
0
40 25
0
25
Ta [C]
50
75 85
40 25
0
25
50
75 85
Ta [C]
S-1206B50
1.4
1.2
1.0
0.8
0.6
0.4
0.2
VIN = 6.0 V
6.5 V
0
40 25
0
25
50
75 85
Ta [C]
17
ULTRA LOW CURRENT CONSUMPTION AND LOW DROPOUT CMOS VOLTAGE REGULATOR
S-1206 Series
Rev.3.2_02
Reference Data
1. Input Transient Response Characteristics (Ta = 25°C)
S-1206B12
I
OUT = 1 mA, tr = tf = 5.0 s
IOUT = 100 mA, tr = tf = 5.0 s
1.8
1.7
1.8
1.7
3.5
3.0
2.5
2.0
1.5
1.0
0.5
3.5
3.0
2.5
2.0
1.5
1.0
0.5
V
IN
1.6
1.5
1.4
1.3
1.2
1.1
1.0
1.6
1.5
1.4
1.3
1.2
1.1
1.0
V
IN
C
C
IN = C
IN = C
L
L
= 0.1 F
= 1.0 F
C
IN = C
L
L
= 0.1 F
= 1.0 F
CIN = C
V
OUT
V
OUT
0
0
0.5
1.4 1.6
1.0 1.2
0.5
1.4 1.6
0.4 0.2 0 0.2 0.4 0.6 0.8 1.0 1.2
0.4 0.2 0 0.2 0.4
0.6 0.8
t [ms]
t [ms]
S-1206B30
I
OUT = 1 mA, tr = tf = 5.0 s
IOUT = 100 mA, tr = tf = 5.0 s
6.0
5.0
4.0
3.0
2.0
1.0
0
1.0
2.0
6.0
5.0
4.0
3.0
2.0
1.0
0
1.0
2.0
4.2
4.0
4.2
4.0
3.8
3.6
3.4
3.2
3.0
2.8
2.6
V
IN
V
IN
3.8
3.6
3.4
3.2
3.0
2.8
2.6
C
C
IN = C
IN = C
L
L
= 0.1 F
= 1.0 F
C
IN = C
L
L
= 0.1 F
= 1.0 F
CIN = C
V
OUT
V
OUT
1.4 1.6
1.4 1.6
1.0 1.2
0.4 0.2 0 0.2 0.4 0.6 0.8 1.0 1.2
0.4 0.2 0 0.2 0.4 0.6
0.8
t [ms]
t [ms]
S-1206B50
I
OUT = 1 mA, tr = tf = 5.0 s
IOUT = 100 mA, tr = tf = 5.0 s
7.0
6.5
6.0
5.5
5.0
4.5
4.0
3.5
3.0
7.0
6.5
6.0
5.5
5.0
4.5
4.0
3.5
3.0
5.6
5.6
5.5
5.4
5.3
5.2
5.1
5.0
4.9
4.8
5.5
5.4
5.3
5.2
5.1
5.0
4.9
4.8
V
IN
V
IN
C
C
IN = C
IN = C
L
L
= 0.1 F
= 1.0 F
C
C
IN = C
IN = C
L
L
= 0.1 F
= 1.0 F
V
OUT
V
OUT
1.4 1.6
1.4 1.6
0.4 0.2 0 0.2 0.4 0.6 0.8 1.0 1.2
0.4 0.2 0 0.2 0.4 0.6 0.8 1.0 1.2
t [ms]
t [ms]
18
ULTRA LOW CURRENT CONSUMPTION AND LOW DROPOUT CMOS VOLTAGE REGULATOR
Rev.3.2_02
S-1206 Series
2. Load Transient Response Characteristics (Ta = 25C)
S-1206B12
VIN = 2.2 V, IOUT = 1 mA 40 mA
VIN = 2.2 V, IOUT = 50 mA 100 mA
2.8
2.8
2.4
2.0
1.6
1.2
0.8
0.4
40
1
100
50
2.4
I
OUT
IOUT
2.0
1.6
1.2
0.8
0.4
C
IN = C
L
L
= 1.0 F
= 0.1 F
C
IN = C
L
L
= 1.0 F
= 0.1 F
V
OUT
VOUT
CIN = C
CIN = C
1.4 1.6
1.4 1.6
1.4 1.6
1.4 1.6
0.4 0.2 0 0.2 0.4 0.6 0.8 1.0 1.2
0.4 0.2 0 0.2 0.4 0.6 0.8 1.0 1.2
t [ms]
t [ms]
S-1206B30
VIN = 4.0 V, IOUT = 1 mA 40 mA
VIN = 4.0 V, IOUT = 50 mA 100 mA
4.6
4.6
40
1
100
50
4.2
4.2
IOUT
IOUT
3.8
3.4
3.0
2.6
2.2
3.8
3.4
3.0
2.6
2.2
C
IN = C
L
L
= 1.0 F
= 0.1 F
C
IN = C
L
L
= 1.0 F
= 0.1 F
V
OUT
VOUT
C
IN = C
CIN = C
1.4 1.6
0.4 0.2 0 0.2 0.4 0.6 0.8 1.0 1.2
0.4 0.2 0 0.2 0.4 0.6 0.8 1.0 1.2
t [ms]
t [ms]
S-1206B50
VIN = 6.0 V, IOUT = 1 mA 40 mA
VIN = 6.0 V, IOUT = 50 mA 100 mA
6.6
6.6
40
1
100
50
6.2
6.2
I
OUT
IOUT
5.8
5.4
5.0
4.6
4.2
5.8
5.4
5.0
4.6
4.2
C
IN = C
L
L
= 1.0 F
= 0.1 F
C
IN = C
L
L
= 1.0 F
= 0.1 F
V
OUT
VOUT
CIN = C
C
IN = C
1.4 1.6
0.4 0.2 0 0.2 0.4 0.6 0.8 1.0 1.2
0.4 0.2 0 0.2 0.4 0.6 0.8 1.0 1.2
t [ms]
t [ms]
19
ULTRA LOW CURRENT CONSUMPTION AND LOW DROPOUT CMOS VOLTAGE REGULATOR
S-1206 Series
Rev.3.2_02
3. Input Voltage Transient Response Characteristics (Ta = 25°C)
S-1206B12
VIN = 2.2 V, IOUT = 1 mA
VIN = 2.2 V, IOUT = 100 mA
4
4
2.5
2.0
2.5
2.0
2
2
V
IN
V
V
IN
C
IN = C
L
L
= 0.1 F
= 1.0 F
0
0
1.5
1.0
0.5
0
1.5
1.0
0.5
0
2
4
6
8
2
4
6
C
IN = C
C
IN = C
L
L
= 0.1 F
= 1.0 F
OUT
V
OUT
CIN = C
8
1.4 1.6
0.5
0.5
1.4 1.6
0.4 0.2 0 0.2 0.4 0.6 0.8 1.0 1.2
0.4 0.2 0 0.2 0.4 0.6 0.8 1.0 1.2
t [ms]
t [ms]
S-1206B30
VIN = 4.0 V, IOUT = 1 mA
VIN = 4.0 V, IOUT = 100 mA
10
10
6
4
2
6
4
2
8
6
8
6
V
IN
V
IN
4
2
4
C
IN = C
L
= 1.0 F
= 0.1 F
0
0
2
4
6
2
4
2
V
OUT
V
OUT
C
IN = C
L
L
= 1.0 F
= 0.1 F
C
IN = C
L
0
0
C
IN = C
6
1.4 1.6
2
2
1.4 1.6
0.4 0.2 0 0.2 0.4 0.6 0.8 1.0 1.2
0.4 0.2 0 0.2 0.4 0.6 0.8 1.0 1.2
t [ms]
t [ms]
S-1206B50
VIN = 6.0 V, IOUT = 1 mA
VIN = 6.0 V, IOUT = 100 mA
14
12
10
8
6
14
12
10
8
8
6
4
2
0
8
6
4
2
VIN
VIN
6
0
2
4
6
2
4
6
4
2
0
4
2
0
V
OUT
C
IN = C
L
L
= 1.0 F
= 0.1 F
VOUT
C
IN = C
L
L
= 1.0 F
= 0.1 F
CIN = C
C
IN = C
8
1.4 1.6
8
1.4 1.6
2
2
0.4 0.2 0 0.2 0.4 0.6 0.8 1.0 1.2
0.4 0.2 0 0.2 0.4 0.6 0.8 1.0 1.2
t [ms]
t [ms]
20
ULTRA LOW CURRENT CONSUMPTION AND LOW DROPOUT CMOS VOLTAGE REGULATOR
Rev.3.2_02
S-1206 Series
4. Ripple Rejection (Ta = 25C)
S-1206B12
S-1206B30
100
V
IN = 2.2 V, CL = 0.1 F
VIN = 4.0 V, CL = 0.1 F
100
80
60
40
20
80
60
40
20
IOUT = 30 mA
I
OUT = 30 mA
0
0
10
100
1k
10k
100k
1M
10
100
1k
10k
100k
1M
Frequency [Hz]
Frequency [Hz]
S-1206B50
VIN = 6.0 V, CL = 0.1 F
100
80
60
40
20
IOUT = 30 mA
0
10
100
1k
10k
100k
1M
Frequency [Hz]
5. Equivalent Series Resistance vs. Output Current Characteristics Example (Ta = 25°C)
CL : Murata Manufacturing Co., Ltd.
GRM115R71C104K (0.1 F)
CIN = CL = 0.1 F
100
VIN
CIN
Stable
S-1206 Series
CL
0
VSS
RESR
0.001
250
IOUT [mA]
21
ULTRA LOW CURRENT CONSUMPTION AND LOW DROPOUT CMOS VOLTAGE REGULATOR
S-1206 Series
Rev.3.2_02
Marking Specifications
1. SOT-23-3
Top view
1
(1) to (3) : Product abbreviation (refer to Product Name vs. Product Code)
(4) :
Lot number
(1) (2) (3) (4)
2
3
Product Name vs. Product Code
Product Code
Product Code
Product Name
Product Name
(1)
(2)
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
(3)
(1)
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
(2)
A
A
A
A
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
(3)
W
X
Y
Z
S-1206B12-M3T1x
S-1206B13-M3T1x
S-1206B14-M3T1x
S-1206B15-M3T1x
S-1206B16-M3T1x
S-1206B17-M3T1x
S-1206B18-M3T1x
S-1206B1J-M3T1x
S-1206B19-M3T1x
S-1206B20-M3T1x
S-1206B21-M3T1x
S-1206B22-M3T1x
S-1206B23-M3T1x
S-1206B24-M3T1x
S-1206B25-M3T1x
S-1206B26-M3T1x
S-1206B27-M3T1x
S-1206B28-M3T1x
S-1206B2J-M3T1x
S-1206B29-M3T1x
S-1206B30-M3T1x
S-1206B31-M3T1x
S
A
B
C
D
E
F
S-1206B32-M3T1x
S-1206B33-M3T1x
S-1206B34-M3T1x
S-1206B35-M3T1x
S-1206B36-M3T1x
S-1206B37-M3T1x
S-1206B38-M3T1x
S-1206B39-M3T1x
S-1206B40-M3T1x
S-1206B41-M3T1x
S-1206B42-M3T1x
S-1206B43-M3T1x
S-1206B44-M3T1x
S-1206B45-M3T1x
S-1206B46-M3T1x
S-1206B47-M3T1x
S-1206B48-M3T1x
S-1206B49-M3T1x
S-1206B50-M3T1x
S-1206B51-M3T1x
S-1206B52-M3T1x
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
A
B
C
D
E
F
G
H
I
J
K
L
G
H
I
M
N
O
P
Q
R
S
T
J
K
L
M
N
O
P
Q
U
V
Remark 1. x: G or U
2. Please select products of environmental code = U for Sn 100%, halogen-free products.
22
ULTRA LOW CURRENT CONSUMPTION AND LOW DROPOUT CMOS VOLTAGE REGULATOR
Rev.3.2_02
S-1206 Series
2. SOT-89-3
Top view
(1) to (3) : Product abbreviation (refer to Product Name vs. Product Code)
(4) to (6) : Lot number
1
2
3
Product Name vs. Product Code
Product Code
Product Code
Product Name
Product Name
(1)
(2)
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
(3)
A
B
C
D
E
F
(1)
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
(2)
A
A
A
A
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
(3)
W
X
Y
Z
S-1206B12-U3T1x
S-1206B13-U3T1x
S-1206B14-U3T1x
S-1206B15-U3T1x
S-1206B16-U3T1x
S-1206B17-U3T1x
S-1206B18-U3T1x
S-1206B1J-U3T1x
S-1206B19-U3T1x
S-1206B20-U3T1x
S-1206B21-U3T1x
S-1206B22-U3T1x
S-1206B23-U3T1x
S-1206B24-U3T1x
S-1206B25-U3T1x
S-1206B26-U3T1x
S-1206B27-U3T1x
S-1206B28-U3T1x
S-1206B2J-U3T1x
S-1206B29-U3T1x
S-1206B30-U3T1x
S-1206B31-U3T1x
S
S-1206B32-U3T1x
S-1206B33-U3T1x
S-1206B34-U3T1x
S-1206B35-U3T1x
S-1206B36-U3T1x
S-1206B37-U3T1x
S-1206B38-U3T1x
S-1206B39-U3T1x
S-1206B40-U3T1x
S-1206B41-U3T1x
S-1206B42-U3T1x
S-1206B43-U3T1x
S-1206B44-U3T1x
S-1206B45-U3T1x
S-1206B46-U3T1x
S-1206B47-U3T1x
S-1206B48-U3T1x
S-1206B49-U3T1x
S-1206B50-U3T1x
S-1206B51-U3T1x
S-1206B52-U3T1x
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
A
B
C
D
E
F
G
H
I
J
K
L
G
H
I
M
N
O
P
Q
R
S
T
J
K
L
M
N
O
P
Q
U
V
Remark 1. x: G or U
2. Please select products of environmental code = U for Sn 100%, halogen-free products.
23
ULTRA LOW CURRENT CONSUMPTION AND LOW DROPOUT CMOS VOLTAGE REGULATOR
S-1206 Series
Rev.3.2_02
3. SNT-6A(H)
Top view
(1) to (3) : Product abbreviation (refer to Product Name vs. Product Code)
6
5
4
(4) to (6) : Lot number
(1) (2) (3)
(4) (5) (6)
1
2
3
Product Name vs. Product Code
Product Code
Product Code
Product Name
Product Name
(1)
(2)
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
(3)
A
B
C
D
E
F
(1)
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
(2)
A
A
A
A
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
(3)
W
X
Y
Z
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S-1206B12-I6T2U
S-1206B13-I6T2U
S-1206B14-I6T2U
S-1206B15-I6T2U
S-1206B16-I6T2U
S-1206B17-I6T2U
S-1206B18-I6T2U
S-1206B1J-I6T2U
S-1206B19-I6T2U
S-1206B20-I6T2U
S-1206B21-I6T2U
S-1206B22-I6T2U
S-1206B23-I6T2U
S-1206B24-I6T2U
S-1206B25-I6T2U
S-1206B26-I6T2U
S-1206B27-I6T2U
S-1206B28-I6T2U
S-1206B2J-I6T2U
S-1206B29-I6T2U
S-1206B30-I6T2U
S-1206B31-I6T2U
S-1206B32-I6T2U
S-1206B33-I6T2U
S-1206B34-I6T2U
S-1206B35-I6T2U
S-1206B36-I6T2U
S-1206B37-I6T2U
S-1206B38-I6T2U
S-1206B39-I6T2U
S-1206B40-I6T2U
S-1206B41-I6T2U
S-1206B42-I6T2U
S-1206B43-I6T2U
S-1206B44-I6T2U
S-1206B45-I6T2U
S-1206B46-I6T2U
S-1206B47-I6T2U
S-1206B48-I6T2U
S-1206B49-I6T2U
S-1206B50-I6T2U
S-1206B51-I6T2U
S-1206B52-I6T2U
A
B
C
D
E
F
G
H
I
J
K
L
G
H
I
M
N
O
P
Q
R
S
T
J
K
L
M
N
O
P
Q
U
V
A
24
2.9±0.2
1
2
3
+0.1
-0.06
0.16
0.95±0.1
1.9±0.2
0.4±0.1
No. MP003-C-P-SD-1.1
TITLE
SOT233-C-PKG Dimensions
MP003-C-P-SD-1.1
No.
ANGLE
UNIT
mm
ABLIC Inc.
+0.1
-0
4.0±0.1
2.0±0.1
ø1.5
0.23±0.1
1.4±0.2
+0.25
ø1.0
-0
4.0±0.1
3.2±0.2
1
2
3
Feed direction
No. MP003-C-C-SD-2.0
TITLE
SOT233-C-Carrier Tape
MP003-C-C-SD-2.0
No.
ANGLE
UNIT
mm
ABLIC Inc.
12.5max.
9.2±0.5
Enlarged drawing in the central part
ø13±0.2
No. MP003-Z-R-SD-1.0
TITLE
SOT233-C-Reel
MP003-Z-R-SD-1.0
No.
QTY.
3,000
ANGLE
UNIT
mm
ABLIC Inc.
4.5±0.1
1.6±0.2
1.5±0.1
45°
1
2
3
1.5±0.1 1.5±0.1
0.4±0.05
0.4±0.1
0.4±0.1
0.45±0.1
No. UP003-A-P-SD-2.0
TITLE
SOT893-A-PKG Dimensions
UP003-A-P-SD-2.0
No.
ANGLE
UNIT
mm
ABLIC Inc.
4.0±0.1(10 pitches : 40.0±0.2)
+0.1
-0
ø1.5
2.0±0.05
0.3±0.05
2.0±0.1
+0.1
-0
ø1.5
8.0±0.1
4.75±0.1
Feed direction
No. UP003-A-C-SD-2.0
TITLE
SOT893-A-Carrier Tape
UP003-A-C-SD-2.0
No.
ANGLE
UNIT
mm
ABLIC Inc.
16.5max.
13.0±0.3
Enlarged drawing in the central part
(60°)
(60°)
No. UP003-A-R-SD-1.1
TITLE
SOT893-A-Reel
UP003-A-R-SD-1.1
No.
1,000
ANGLE
UNIT
QTY.
mm
ABLIC Inc.
1.57±0.03
6
4
5
+0.05
-0.02
0.08
1
2
3
0.5
0.48±0.02
0.2±0.05
No. PI006-A-P-SD-2.1
SNT-6A(H)-A-PKG Dimensions
PI006-A-P-SD-2.1
TITLE
No.
ANGLE
UNIT
mm
ABLIC Inc.
+0.1
-0
ø1.5
4.0±0.1
2.0±0.05
0.25±0.05
+0.1
ø0.5
-0
4.0±0.1
0.65±0.05
1.85±0.05
3
2
5
1
6
4
Feed direction
No. PI006-A-C-SD-2.0
TITLE
SNT-6A(H)-A-Carrier Tape
PI006-A-C-SD-2.0
No.
ANGLE
UNIT
mm
ABLIC Inc.
12.5max.
9.0±0.3
Enlarged drawing in the central part
ø13±0.2
(60°)
(60°)
No. PI006-A-R-SD-1.0
TITLE
SNT-6A(H)-A-Reel
PI006-A-R-SD-1.0
No.
ANGLE
UNIT
QTY.
5,000
mm
ABLIC Inc.
0.52
2
1.36
0.52
1
0.3
0.2
1.
2.
(0.25 mm min. / 0.30 mm typ.)
(1.30 mm ~ 1.40 mm)
1.
2.
0.03 mm
3.
4.
SNT
1. Pay attention to the land pattern width (0.25 mm min. / 0.30 mm typ.).
2. Do not widen the land pattern to the center of the package (1.30 mm to 1.40 mm).
Caution 1. Do not do silkscreen printing and solder printing under the mold resin of the package.
2. The thickness of the solder resist on the wire pattern under the package should be 0.03 mm
or less from the land pattern surface.
3. Match the mask aperture size and aperture position with the land pattern.
4. Refer to "SNT Package User's Guide" for details.
(0.25 mm min. / 0.30 mm typ.)
(1.30 mm ~ 1.40 mm)
1.
2.
SNT-6A(H)-A
-Land Recommendation
TITLE
No. PI006-A-L-SD-4.1
No.
PI006-A-L-SD-4.1
ANGLE
UNIT
mm
ABLIC Inc.
Disclaimers (Handling Precautions)
1. All the information described herein (product data, specifications, figures, tables, programs, algorithms and application
circuit examples, etc.) is current as of publishing date of this document and is subject to change without notice.
2. The circuit examples and the usages described herein are for reference only, and do not guarantee the success of
any specific mass-production design.
ABLIC Inc. is not responsible for damages caused by the reasons other than the products described herein
(hereinafter "the products") or infringement of third-party intellectual property right and any other right due to the use
of the information described herein.
3. ABLIC Inc. is not responsible for damages caused by the incorrect information described herein.
4. Be careful to use the products within their specified ranges. Pay special attention to the absolute maximum ratings,
operation voltage range and electrical characteristics, etc.
ABLIC Inc. is not responsible for damages caused by failures and / or accidents, etc. that occur due to the use of the
products outside their specified ranges.
5. When using the products, confirm their applications, and the laws and regulations of the region or country where they
are used and verify suitability, safety and other factors for the intended use.
6. When exporting the products, comply with the Foreign Exchange and Foreign Trade Act and all other export-related
laws, and follow the required procedures.
7. The products must not be used or provided (exported) for the purposes of the development of weapons of mass
destruction or military use. ABLIC Inc. is not responsible for any provision (export) to those whose purpose is to
develop, manufacture, use or store nuclear, biological or chemical weapons, missiles, or other military use.
8. The products are not designed to be used as part of any device or equipment that may affect the human body, human
life, or assets (such as medical equipment, disaster prevention systems, security systems, combustion control
systems, infrastructure control systems, vehicle equipment, traffic systems, in-vehicle equipment, aviation equipment,
aerospace equipment, and nuclear-related equipment), excluding when specified for in-vehicle use or other uses. Do
not apply the products to the above listed devices and equipments without prior written permission by ABLIC Inc.
Especially, the products cannot be used for life support devices, devices implanted in the human body and devices
that directly affect human life, etc.
Prior consultation with our sales office is required when considering the above uses.
ABLIC Inc. is not responsible for damages caused by unauthorized or unspecified use of our products.
9. Semiconductor products may fail or malfunction with some probability.
The user of the products should therefore take responsibility to give thorough consideration to safety design including
redundancy, fire spread prevention measures, and malfunction prevention to prevent accidents causing injury or
death, fires and social damage, etc. that may ensue from the products' failure or malfunction.
The entire system must be sufficiently evaluated and applied on customer's own responsibility.
10. The products are not designed to be radiation-proof. The necessary radiation measures should be taken in the
product design by the customer depending on the intended use.
11. The products do not affect human health under normal use. However, they contain chemical substances and heavy
metals and should therefore not be put in the mouth. The fracture surfaces of wafers and chips may be sharp. Be
careful when handling these with the bare hands to prevent injuries, etc.
12. When disposing of the products, comply with the laws and ordinances of the country or region where they are used.
13. The information described herein contains copyright information and know-how of ABLIC Inc.
The information described herein does not convey any license under any intellectual property rights or any other
rights belonging to ABLIC Inc. or a third party. Reproduction or copying of the information from this document or any
part of this document described herein for the purpose of disclosing it to a third-party without the express permission
of ABLIC Inc. is strictly prohibited.
14. For more details on the information described herein, contact our sales office.
2.2-2018.06
www.ablic.com
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明